• Journal of Broadcast Engineering
• /
• v.25 no.5
• /
• pp.698-708
• /
• 2020

VVC (Versatile Video Coding), which has been developing as a next generation video coding standard. Compared to HEVC (High Efficiency Video Coding), VVC is improved by about 34% in RA (Random Access) configuration and about 30% in LDB (Low-Delay B) configuration by adopting various techniques such as recursive block partitioning structure and GPM (Geometric Partitioning Mode). But the encoding complexity is increased by about 10x and 7x, respectively. In this paper, we propose a fast decision method of GPM mode and block partitioning using directionality of block to reduce encoding complexity of VVC. The proposed method is to apply the Hough transform to the current block to identify the directionality of the block, thereby determining the GPM mode and the specific block partitioning method to be skipped in the rate-distortion cost search process. As a result, compared to VTM8.0, the proposed method reduces about 31.01% and 29.84% encoding complexity for RA and LDB configuration with 2.48% and 2.69% BD-rate loss, respectively.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.211-222
• /
• 2004

By development of wireless mobile communication, many users increased. But, in case of 1st generation or 2nd generation, transfer communication service was not satisfying high speed wireless internet Communication consumer's request such as other multimedia service because serviced based on voice and text basically. Can get through service such as data and transfer multimedia service that is not service of voice putting first in wireless hereafter. Problems by much development of service are happening, because a transmit is exposed, problem point that wireless network is much unlawful stealing use and tapping etc. As is different from this, problem can happen in service side. Can take next time for these example. By user that is not right can happen. Need method to keep away purpose that is enemy of third party in contract between both men as well as problem for document or accounting information which the third user that is enemy of third party is shared. By solution about problems, certification of contents for document and visual point confirmation must it. Applied service or certification of contents service that is rapidly point of time that is using in wire to solve problem that refer in front in this treatise in IMT-2000 to develop hereafter. Way to propose proposed efficient way using individual in IMT-2000 just as it is.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.764-781
• /
• 2013

In this paper, we propose a highly precise vehicle detection method with low false alarm using billboard sweep stereo matching and multi-stage hypothesis generation. First, we capture stereo images from cameras established in front of the vehicle and obtain the disparity map in which the regions of ground plane or background are removed using billboard sweep stereo matching algorithm. And then, we perform the vehicle detection and tracking on the labeled disparity map. The vehicle detection and tracking consists of three steps. In the learning step, the SVM(support vector machine) classifier is obtained using the features extracted from the gabor filter. The second step is the vehicle detection which performs the sobel edge detection in the image of the left camera and extracts candidates of the vehicle using edge image and billboard sweep stereo disparity map. The final step is the vehicle tracking using template matching in the next frame. Removal process of the tracking regions improves the system performance in the candidate region of the vehicle on the succeeding frames.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.133-138
• /
• 1983

In Korea, Brassica species planted in summer remain in rosette and do not flower. Seed production of vernalized rape seedlings grown in summer was evaluated to establish method of generation shortening and genetically pure seed production without isolation of seed fields. When vernalized rape seedlings of different maturity groups were transplanted in summer, all plants bolted and flowered, and average days from sowing to bolting and flowering was 37 and 58. respectively. It took 85days for early maturity group, 88 days for medium maturity group, and 108 days for late maturity group to mature. Seed yield of vernalized plants grown in summer was 8.8 gr per plant and 53kg per l0a which was 23% of seed yield of rape planted in autumn. However, enough seeds were produced to test oil composition and cake and to plant for a next generation. If seedlings are raised, they can be transplanted in more than 1, 000 times of original seed field, indicating that genetically pure seed can be produced without caging seed fields with nets and isolation of seed fields since other Brassica species do not flower in summer.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.38-47
• /
• 2018

Integrated gasification combined cycle (IGCC) is a next generation energy production technology that converts coal into syngas with enhanced power generation efficiency and environmental performance. IGCC produces almost coal gasification slag as the solid by-product. IGCC slag is generated about 140,000 tons for a year although recycling of it is still in the early stages. We evaluated the potential of IGCC slag which is generated from a pilot plant in South Korea as an alkali-activated cement. Samples which were activated with the combined activator of sodium silicate solution and caustic soda had an average compressive strength of 4.5 MPa, showing expansion. Expansion of the alkali-activated slag was presumed to be caused by free CaO in the slag, although it was not detected by the ethylene glycol method. Samples that were activated with the combined activator of sodium aluminate and caustic soda had an average compressive strength of 10 MPa. Hydroxy sodalite and $C_3AH_6$ were found to be the new crystalline phases. IGCC slag can be used as an alkali-activated material, but the strength performance should be improved with proper mix design approach to calculate optimum proportions which can alleviate the expansion issue at the same time.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.26-34
• /
• 1998

This paper presents a characterization method for faults of circuit patterns on MCM(Multichip Module) or PCB(Printed Circuit Board) substrates with electron beams of a SEM(Scanning Electron Microscope) by inducing voltage contrast on the signal line. The experimentation employes dual potential electron beams for the fault characterization of circuit patterns with a commercial SEM without modifying its structure. The testing procedure utilizes only one electron gun for the generation of dual potential electron beams by two different accelerating voltages, one for charging electron beam which introduces the yield of secondary electron $\delta$ < 1 and the other for reading beam which introduces $\delta$ > 1. Reading beam can read open's/short's of a specific net among many test nets, simultaneously discharging during the reading process for the next step, by removing its voltage contrast. The experimental results of testing the copper signal lines on glass-epoxy substrates showed that the state of open's/short's had generated the brightness contrast due to the voltage contrast on the surface of copper conductor line, when the net had charged with charging electron beams of 7KV accelerating voltages and then read with scanning reading electron beams of 2KV accelerating voltages in 10 seconds. The experimental results with Au pads of a IC die and Au plated Cu pads of BGA substrates provided the simple test method of circuit lines with 7KV charging electron beam and 2KV reading beam. Thus the characterization method showed that we can test open and short circuits of the net nondestructively by using dual potential electron beams with one SEM gun.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.221-252
• /
• 2010

This study presents a concept of technology trade network and management, and proposes a procedural method for optimally selecting the technology transferor when a technology transferee needs to buy a specific technology. We develop a technology trade network where technology supplier, technology marketer, and technology transferee are informatively linked. And a technology trade management consists of three step of estimating technology, trading technology, and commercialization technology. Technology transferees could import the best appropriate technology which they want through these technology network method and cost optimization method. And we hope that these methodologies can be used in selecting new technology. A methodology can be classified into an estimating technology process and a choice of technology supplier process. In an estimating technology process, we calculate the technology similarity quantitatively through developing method of estimating technology which is focused on its technological characteristics. After defining the related cost of technology introduction, we suggest goal programming model to find a solution which can be acceptable both maximizing the technology similarity and minimizing the cost of technology. And suggested model is verified with a supplier selection problem of next generation tanks.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.1-12
• /
• 2011

Large-sized multi-touch screen is usually made using infrared rays. That is because it has technical constraints or cost problems to make the screen with the other ways using such as existing resistive overlays, capacitive overlay, or acoustic wave. Using infrared rays to make multi-touch screen is easy, but is likely to have technical limits to be implemented. To make up for these technical problems, two other methods were suggested through Surface project, which is a next generation user-interface concept of Microsoft. One is Frustrated Total Internal Reflection (FTIR) which uses infrared cameras, the other is Diffuse Illumination (DI). FTIR and DI are easy to be implemented in large screens and are not influenced by the number of touch points. Although FTIR method has an advantage in detecting touch-points, it also has lots of disadvantages such as screen size limit, quality of the materials, the module for infrared LED arrays, and high consuming power. On the other hand, DI method has difficulty in detecting touch-points because of it's structural problems but makes it possible to solve the problem of FTIR. In this thesis, we study the algorithms for effectively correcting the distort phenomenon of optical lens, and image processing algorithms in order to solve the touch detecting problem of the original DI method. Moreover, we suggest calibration algorithms for improving the accuracy of multi-touch, and a new tracking technique for accurate movement and gesture of the touch device. To verify our approaches, we implemented a table-based multi touch screen.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.346-352
• /
• 2020

Versatile Video Coding (VVC), a next-generation video coding standard that is in the final stage of standardization, has adopted various techniques to achieve more than twice the compression performance of HEVC (High-Efficiency Video Coding). VVC adopted Bi-prediction with CU-level Weight (BCW), which generates the final prediction signal with the weighted combination of bi-predictions with various weights, to enhance the performance of the bi-predictive inter prediction. The syntax element of the BCW index is adaptively coded according to the value of NoBackwardPredFlag which indicates if there is no future picture in the display order among the reference pictures. Such syntax structure for signaling the BCW index could violate the flexibility of video codec and cause the dependency issue at the stage of bitstream parsing. To address these issues, this paper proposes an efficient BCW weight signaling method which enables all weights and parsing without any condition check. The performance of the proposed method was evaluated with various weight searching methods in the encoder. The experimental results show that the proposed method gives negligible BD-rate losses and minor gains for 3 weights searching and 5 weights searching, respectively, while resolving the issues.