• International Journal of Reliability and Applications
• /
• 제9권1호
• /
• pp.31-52
• /
• 2008

In this paper generalized version of the geometric distribution is introduced. This distribution can be considered as a two-parameter generalization of the discrete geometric distribution. The main statistical and reliability properties of this distribution are discussed. Two methods of estimation, namely maximum likelihood method and the method of moments are used to estimate the parameters of this distribution. Simulation is utilized to calculate these estimates and to study some of their properties. Also, asymptotic confidence limits are established for the maximum likelihood estimates. Finally, the appropriateness of this new distribution for a set of real data, compared with the geometric distribution, is shown by using the likelihood ratio test and the Kolmogorove-Smirnove test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.223-228
• /
• 2009

Cooling and heating equipments of railroad passenger cabin is one of the most important part in keeping the good thermal comfort of the passengers. The bad performance of these equipments usually results in the comfort of the passengers. However, there is no testing method for cooling and heating equipments during manufacturing the passenger car, and calculation method is frequently used. Many railroad operators spend a lot of money for the maintenance. In this study, a new environmental performance test for railroad passenger cabin was suggested. The temperature of the chamber will be changed from $-40^{\circ}C$ to $60^{\circ}C$. The performance test of cooling and heating equipment in controlling the passenger cabin temperature was carried out under various temperature condition. The testing method to investigate the effect of artificial sunlight irradiation on the passenger cabin temperature was also suggested.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.82-92
• /
• 2012

본 연구에서는 콘크리트 교량 바닥판의 열화를 비파괴시험인 지표투과레이더(GPR)를 이용하여 평가하는 방법을 개발하였다. 콘크리트 교량 바닥판의 유전 상수를 계산하기 위하여 비접촉식 GPR 안테나를 이용하여 2층 구조체에 적용할 수 있는 확장형 공통중간점 방법을 개발하였다. 콘크리트 교량 바닥판의 열화 깊이와 열화 상태는 콘크리트 교량 바닥판의 유전 상수와 표면대비 평균 유전상수비를 이용하여 평가하였다. 제안된 방법을 검증하기 위하여 GPR 현장 시험을 공용수명이 오래된 콘크리트 교량에서 실시하였다. 시험 결과 새로 제안된 방법을 이용하여 추정된 두께와 열화 깊이가 어느 정도 신뢰성을 가지는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.333-340
• /
• 2004

This paper deals with geometric nonlinear analyses using a new meshfree technique which improves the numerical integration accuracy. The new method called the Petrov-Galerkin natural element method (PGNEM) is based on the Voronoi diagram and the Delaunay triangulation which is based on the same concept used for conventional natural element method called the Bubnov-Galerkin natural element method (BGNEM). But, unlike BGNEM, the test shape function is differently chosen from the trial shape function. In the linear static analysis, it is ensured that the numerical integration error of the PGNEM is remarkably reduced. In this paper, the PGNEM is applied to large deformation problems, and the accuracy of the proposed numerical technique is verified through the several examples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.426-431
• /
• 1991

Diakoptic method applied to analyze large power system, always require the efficient tearing algorithm. But conventional tearing methods is not suitable to apply practical power system. This paper presents new tearing algorithm based on factorization path concept of sparse vector method, and applied MPRLD, a kind of optimal ordering algorithm, in ordering step to improve the efficiency of tearing algorithm. Test result of model systems shows that new proposed method in this paper is enable to tear power systems not to be teared by heuristic cluster method, reduces computing time and memory size.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1059-1064
• /
• 2001

This study is about accurate steel column position method in the Top down method's delicate part. When the concrete is placing, it is required that complementary measures to the transformation due to concrete pressure, column buckling, the trouble due to bar net inserting and so on. To solve the problem of exist method, the concrete is placed at the bottom of excavated hole in advance. then, the steel column is inserted into the excavated hole. With a new method try, the problem due to placing pressure and others is could be prevented. In this study, the concrete is examined with test-slump, slump flow, and compressive strength to do quantitative analysis of concrete. The factors of the experiment is plasticizer, retarder addition rate, fly ash substitution rate to cement. Considering of the new method try, the retarder added concrete properties-fluidity, viscosity, strength-is investigated as time lapsing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.569-572
• /
• 1992

This paper describes a new method of pseudorandom testing of a digital circuit by use of correlation method and a neural network. The authors have recently proposed a new method of fault diagnosis of logical circuit by applying a pseudorandom M-sequence to the circuit under test, calculating the crosscorrelation function between the input and the output, and comparing the crosscorrelation functions with the references. This method, called MSEC method, is further extended by using a neural network in order to not only detect the existence of faults but also find the place or location of the faults. An experiment by using a simple digital circuit shows enough applicability of this method to industrial testing of circuit board.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.68-76
• /
• 1994

In the automatic transistor sizing with computer for optimizing delay and the chip area of CMOS digital circuits, conventionally either a mathematical method or a heuristic method has been used. In this paper, we present a new method of transistor sizing, a sort of combination of the above two methods, in which the mathematical method is used for sizing of critical paths and the heuristic method is used for desizing of non-critical paths. In order to reduce the overall problem dimension, a basic block called an extended stage is introduced which includes a basic stage, parallel transistors and complementary part. Optimization for multiple critical paths is formulated as a problem of area minimization subject to delay constraints and is solved by the augmented Lagrange multiplier method. The transistor sizes along non-critical paths are decreased successively without affecting the critical path delay times. The proposed scheme was successfully applied to several test circuits.

• Nonlinear Functional Analysis and Applications
• /
• 제26권4호
• /
• pp.811-837
• /
• 2021

In this paper, we propose a new conjugate gradient method for solving unconstrained optimization models. By using exact and strong Wolfe line searches, the proposed method possesses the sufficient descent condition and global convergence properties. Numerical results show that the proposed method is efficient at small, medium, and large dimensions for the given test functions. In addition, the proposed method was applied to solve practical application problems in portfolio selection.