• 소성∙가공
• /
• 제6권3호
• /
• pp.239-249
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for filling phenomena in forging process of arbitrarily shaped dies. To produce a automotive part which has good mechanical property, the filling pattern according to die velocity and solid fraction distribution has to be estimated for arbitrarily shaped dies. Therefore, the estimation of filling characteristic in the forging simulation with arbitrarily shaped dies of semi-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for arbitrarily shaped dies is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process with arbitrarily shaped dies is performed to the isothermal conditions of two dimensional problems. To analysis of forging process by using semi-solid materials, a new stress-strain relationship is described, and forging analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for forging force and filling limitations will be compared to experimental data. The filling simulation of simple products performed with the uniform billet temperature(584$^{\circ}C$) from the induction heating by the commercial package MAGMAsoft. The initial step of computation is the touching of semi-solid material with the end of die gate and the initial concept of proposed system just fit with the capability of MAGMAsoft.

• 대한미생물학회지
• /
• 제16권1호
• /
• pp.1-5
• /
• 1981

Shigella is one of the most prevalent pathogens for the diarrhoeal diseases in the developing countries. One hundered and six strains of shigella were isolated from January 1980 to August 1981 at the dept. of clinical pathology, Han Yang Medical Center. Subgroups of these strains were identified as one strain of S. dysenteriae, 98 strains of S. flexneri and 7 strains of S. sonnei. None of S. boydii was observed. Sex ratio, male to female was 48 to 58. Age distribution disclosed 6 cases under one year, 11 cases one to under 2 years and 21 cases(19.8%) two to under 3 years. Subtotal of 0 to 9 years showed 64 cases(60.4%). Susceptibility for antibiotics of these strains revealed dibekacin 100%, sisomicin 100%, amikacin 98.1%, cefazolin 97.2%, tobramycin 97.1%, gentamicin 95.2%, colistin 93.0%, minocycline 89.6%, kanamycin 83.0%, carbenicillin 18.9%, streptomycin 18.9%, tmp-smz 8.6%, ampicillin 2.8% and chloramphenicol 1.9%. Patterns of resistance to sulfa, streptomycin, chloramphenical and tetracycline have already started at the early part of 1960 decade. Although ampicillin was highly sensitive to shigella at the end of 1960 to the early part of 1970 decade, this study has disclosed high resistance to the strains. New antibiotics such as amikacin, cefazolin, dibekacin, gentamicin, and tobramycin have revealed highly sensitive to these strains, however, multiresistance for those antibiotics will be shown to be prevalent in this country within several years, where it is probably related to the unrestricted sale and use of antibiotics in man.

• 한국어병학회지
• /
• 제11권2호
• /
• pp.137-141
• /
• 1998

TSB 해수배지와 숙주로서 L. garvieae No. 44를 배양조건으로 사용한 경우, L. garvieae 111균주중 용원화되었다고 추정되어진 96균주의 cells에서 temperate Phage가 효과적으로 분리되었다. 하지만 동일한 배양조건에서 보통의 TSB 배지를 사용한 경우에서는 temperate phage는 전혀 나타나지 않았다. 이 temperate phages는 TSB 해수배지와 ultraviolet irradiation를 병용한 경우 역시 효과적으로 분리되었다. 분리된 모든 temperate Phages는 기존의 phage(PLgY, PLgW, PLgS) 의 lytic nature와는 달리 오직 L.garvieae No. 44만을 lysis하였다. 배양후 약 1시간후 phage가 나타났으며 12시간 후 virulent phage의 최고농도($10^{10}$ PFU/ml) 보다 훨씬 낮은 농도인 $10^6$ PFU/ml까지 증가하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.154-157
• /
• 2006

Composite material is one of the strong candidates for deep see pressure hulls. Research regarding composite unstiffened or stiffened cylinders subjected to hydrostatic pressure has a couple of decades history abroad but domestic research is very new. Experimental investigations seem necessary to understand their structural behavior not only up to the ultimate limit state but in post-ultimate regime. Those experimental information will be very helpful to develop any theoretical methods or to substantiate any commercial numerical packages for structural analyses. In this study, ultimate strength tests on seven composite cylinders subjected to hydrostatic pressure are reported, which includes the fabrication method of models, material properties of the material, initial shape imperfection measurements, test procedure and strain and axial shortening measurements during the tests. The ultimate strengths of the models were compared with those of numerical analyses. The numerical predictions are higher than the test results. It is necessary to improve the accuracy of the numerical predictions.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2006년도 추계 학술발표회 발표논문집
• /
• pp.285-289
• /
• 2006

In screening of algicidal bacteria, we isolated a marine bacterium which had potent algicidal effects on harmful algal bloom (HAB) species. This organism was identified as a strain very close to Bacillus subtilisby 16S rRNA gene sequencing. This bacterium, Bacillus sp. SY-1, produces very active algicidal compounds against the harmful dinoflagellate Cochlodinium polykrikoides. We isolated three algicidal compounds (MS 1056, 1070, 1084) and identified them by amino acid analyses, fast atom bombardment mass spectrometry (FAB-MS), infrared spectroscopy (IR), $^1H$, $^{13}C$, and extensive two-dimensional nuclear magnetic resonance (2D NMR) techniques including $^1H-^{15}N$ HMBC analysis. One of them, MS 1056, contains a b-amino acid residue with an alkyl side chain of $C_{15}$. MS 1056, 1070, and 1084 showed algicidal activities against C. polykrikoides with an $LC_{50}$ (6 hrs) of 2.3, 0.8, $0.6\;{\mu}g/ml$, respectively. These compounds also showed significant algicidal activities against other harmful dinoflagellates and raphidophytes. In contrast, MS 1084 showed no significant growth inhibition against various organisms coexisting with HAB species in natural environments, including bacteria, eukaryotic microalgae, and cyanobacteria, although it inhibited growth of some fungi and yeasts. These observations imply that algicidal bacterium Bacillus sp. SY-1 and its algicidal compounds could play an important role in regulating the onset and development of HABs in the natural environments.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.559-576
• /
• 2014

A new mathematical model and its finite element formulation for the non-linear stress-strain analysis of a planar beam strengthened with plates bolted or adhesively bonded to its lateral sides is presented. The connection between the layers is considered to be flexible in both the longitudinal and the transversal direction. The following assumptions are also adopted in the model: for each layer (i.e., the beam and the side plates) the geometrically linear and materially non-linear Bernoulli's beam theory is assumed, all of the layers are made of different homogeneous non-linear materials, the debonding of the beam from the side-plates due to, for example, a local buckling of the side plate, is prevented. The suitability of the theory is verified by the comparison of the present numerical results with experimental and numerical results from literature. The mechanical response arising from the theoretical model and its numerical formulation has been found realistic and the numerical model has been proven to be reliable and computationally effective. Finally, the present formulation is employed in the analysis of the effects of two different realizations of strengthening of a characteristic simply supported flexural beam (plates on the sides of the beam versus the tension-face plates). The analysis reveals that side plates efficiently enhance the bearing capacity of the flexural beam and can, in some cases, outperform the tensile-face plates in a lower loss of ductility, especially, if the connection between the beam and the side plates is sufficiently stiff.

• Structural Engineering and Mechanics
• /
• 제45권5호
• /
• pp.677-691
• /
• 2013

A semi-analytical finite strip method is developed for analyzing the post-buckling behavior of rectangular composite laminated plates of arbitrary lay-up subjected to progressive end-shortening in their plane and to normal pressure loading. In this method, all the displacements are postulated by the appropriate harmonic shape functions in the longitudinal direction and polynomial interpolation functions in the transverse direction. Thin or thick plates are assumed and correspondingly the Classical Plate Theory (CPT) or Higher Order Plate Theory (HOPT) is applied. The in-plane transverse deflection is allowed at the loaded ends of the plate, whilst the same deflection at the unloaded edges is either allowed to occur or completely restrained. Geometric non-linearity is introduced in the strain-displacement equations in the manner of the von-Karman assumptions. The formulations of the finite strip methods are based on the concept of the principle of the minimum potential energy. The Newton-Raphson method is used to solve the non-linear equilibrium equations. A number of applications involving isotropic plates, symmetric and unsymmetric cross-ply laminates are described to investigate the through-thickness shearing effects as well as the effect of pressure loading, end-shortening and boundary conditions. The study of the results has revealed that the response of the composite laminated plates is particularly influenced by the application of the Higher Order Plate Theory (HOPT) and normal pressure loading. In the relatively thick plates, the HOPT results have more accuracy than CPT.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.943-966
• /
• 2016

Recently, magnetorheological elastomer (MRE) material and its devices have been developed and attracted a good deal of attention for their potentials in vibration control. Among them, a highly adaptive base isolator based on MRE was designed, fabricated and tested for real-time adaptive control of base isolated structures against a suite of earthquakes. To perfectly take advantage of this new device, an accurate and robust model should be built to characterize its nonlinearity and hysteresis for its application in structural control. This paper first proposes a novel hysteresis model, in which a nonlinear hyperbolic sine function spring is used to portray the strain stiffening phenomenon and a Voigt component is incorporated in parallel to describe the solid-material behaviours. Then the fruit fly optimization algorithm (FFOA) is employed for model parameter identification using testing data of shear force, displacement and velocity obtained from different loading conditions. The relationships between model parameters and applied current are also explored to obtain a current-dependent generalized model for the control application. Based on the proposed model of MRE base isolator, a second-order sliding mode controller is designed and applied to the device to provide a real-time feedback control of smart structures. The performance of the proposed technique is evaluated in simulation through utilizing a three-storey benchmark building model under four benchmark earthquake excitations. The results verify the effectiveness of the proposed current-dependent model and corresponding controller for semi-active control of MRE base isolator incorporated smart structures.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.835-841
• /
• 2012

철도차량의 제동 디스크에 사용될 수 있는 주물재료 4 종에 대해 인장강도, 압축강도, 경도, 비열, 비중, 열전도도 등 여러 특성값을 측정하였다. Ni, Cr, Mo 의 조성비에 따라 인장강도, 압축강도, 경도 등을 조절할 수 있었다. 이들 재료에 대해 열피로 시험을 수행할 수 있는 장치를 사용하여 원통형 시편에 대해 열크랙의 발생과 길이를 측정하여 재료의 내열성을 평가하였다. 그리고 열피로 시험과정을 유한요소법으로 해석하고 Manson-Coffin 식과 주변형률을 이용하여 열피로수명을 평가하여 시험결과와 비교, 검토하였다. 해석에 의한 예측수명은 관찰영역의 균열의 총 길이가 $40{\mu}m{\sim}1mm$ 사이에 있을 때의 수명에 해당함을 알 수 있다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권4호
• /
• pp.287-297
• /
• 2020

The research aims to investigate the impact levels of determinants on the loyalty of accountants to FDI firms underlying investment management in Thanglong Industrial Park in Hanoi, Vietnam. We conducted a questionnaire consisting of 31 observation variables with a 5-point Likert scale. Independent variables were measured from 1 "without effect" to 5 "strongly". The method of data collection was done through the survey and subjects are accountants in FDI firms doing business in Thanglong Industrial Park in Hanoi. After checking the information on the votes, there are 120 questionnaires with full information for data entry and analysis, This study employs Cronbach's Alpha test, and regression model. The results show that seven determinants including Working environment, The characteristics of working; Training, promotion prospects and development; Income, Personal characteristic, Collective work together and The method of leading had positive relationships with the loyalty of accountants. Based on the findings, some recommendations are given related to such determinants to improve the loyalty of accountants of FDI firms in general and FDI firms in Thanglong Industrial Park in Hanoi in particular. With which, those firms can enhance performance, reduce financial strain, saving on investment in the recruiting process of new staff, increase profitability to ensure investment management.