• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.692-699
• /
• 2019

Elizabethkingia miricola BM10, a symbiotic bacterium, has been isolated from the hindgut of Reticulitermes speratus KMT001, a termite which occurs on Bukhan Mountain in Seoul, Korea. This strain demonstrated a symbiotic characteristic, in that it lacked endo-${\beta}$-1,4-glucanase activity, in a previous study. The major fatty acids of E. miricola BM10 were iso-$C_{15:0}$, iso-$C_{17:0}$ 3-OH, and summed feature 3 (iso-$C_{16:1}{\omega}7c/C_{16:1}{\omega}6c$). The content of iso-$C_{17:0}$ 3-OH was higher, while those of ECL 13.566, iso-$C_{17:11}{\omega}9c$, and summed feature 4 were lower than the other three type-strains of the Elizabethkingia genus. The 16S rRNA phylogenetic analysis confirmed that E. miricola BM10 is a new species. The whole genome of E. miricola BM10 was sequenced. The average nucleotide identity of strain BM10 as evaluated by pairwise comparison with E. anophelis R26, E. meningoseptica ATCC 13253, and E. miricola GTC 862 was shown to be 91.5%, 81.2%, and 94.29%, respectively. Based on our study results, E. miricola BM10 appears to represent a new strain of the genus Elizabethkingia.

• Fisheries and Aquatic Sciences
• /
• 제2권1호
• /
• pp.17-24
• /
• 1999

The blooms caused by Fibrocapsa japonica have occurred regularly in New Zea1andean coastal waters, and no fish kills and economic impacts have been reported. However, Fibrocapsa japonica in Japan killed caged juvenile fish and has been regarded as a harmful micro algae. In this comparative study a New Zealand isolate was found to be morphologically similar to a Japanese isolate, although slightly larger on average than. Optimal temperatures for growth differed, with fastest growth rates occurring at $22-24^{\circ}C$ for the New Zealand strain and $16-22^{\circ}C$ for the Japanese strain, with a decrease in growth rate exhibited by the latter at $25^{\circ}C$. Both isolates had low salinity optima of 20-25 PSU, although they grew between 15 and 30 PSU. Growth declined significantly for both strains above 30 PSU.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4784-4789
• /
• 2014

본 논문의 목적은 세척기를 구조 변경하여 새로운 세척기를 개발하는데 있다. 세척 성능을 향상시킨 세척기 개발을 위하여 기존의 세척기 구조를 변경하여 설계하였다. 설계 시 프로그램은 CATIA를 사용하였으며 구조해석에 필요한 모델링도 CATIA를 사용하였다. 또한 모델링된 세척기에 대하여 3차원 유한요소해석 프로그램인 ANSYS를 사용하여 구조해석을 실시하였으며 해석결과로서 총변형량, 응력, 변형률을 구하였다. 이러한 구조해석의 결과는 새로운 세척기의 제품개발에 활용되었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.362-369
• /
• 2017

Purpose: Recently, the government of China has established new safety regulations for towing devices. The new Chinese regulation has more unfavorable conditions than the conditions of other countries. So the various measures have been reviewed to satisfy this regulation. Methods: The regulation conditions were compared through analysis of strain energy, and a method for improving the accuracy of analysis is suggested. In addition, the test method considering the tolerance is presented through tolerance analysis. This paper also explained importance of confirming the quality of products through a case of poor quality of Chinese products such as poor heat treatment. Result: We could know how strong Chinese regulations are stronger than other national laws and investigated which member receives a lot of strain energy. In order to cope with these Chinese regulations, we suggested improvement of analysis accuracy, test method through tolerance analysis, and heat treatment quality. Conclusion: This paper contributed to general counterplan of the strengthened new Chinese regulations for towing device.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.292-296
• /
• 2008

A new method of evaluating critical damage values of commercial materials is presented in this paper. The method is based on the previous study of the methodology [1] of acquisition of true stress-strain curves or flow stress curves over large strain from the tensile test in which the flow stress is described by the Hollomon law-like form, that is, by the strain dependent strength coefficient and the strain hardening exponent. The strain hardening exponent is calculated from the true strain at the necking point to meet the Considere condition. The strength coefficient is assumed to be constant before necking and represented by a piecewise linear function of strain after necking. With the predicted flow stress, a tensile test is simulated by a rigid-plastic finite element method with higher accuracy of less than 0.5% error between experiments and predictions. The instant when the fracture begins and thus the critical damage is obtained is determined by observing the stress variation at the necked region. It is assumed that the fracture due to damage begins when the pattern of stress around the necked region changes radically. The method is applied to evaluate the critical damage of a low carbon steel.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.371-384
• /
• 2017

Ultra high performance concrete (UHPC) has recently been applied as an alternative to conventional concrete in construction due to its extremely high compressive and tensile strength, and enhanced durability. However, up to date, there has been insufficient information regarding the confinement behavior of UHPC columns. Therefore, this study aims to perform an assessment of axial stress-strain model for UHPC confined by circular steel tube stub columns. The equations for calculating the confined peak stress and its corresponding strain of confined concrete in existing models suggested by Johansson (2002), Sakino et al. (2004), Han et al. (2005), Hatzigeorgiou (2008) were modified based on the regression analysis of test results in Schneider (2006) in order to increase the prediction accuracy for the case of confined UHPC. Furthermore, a new axial stress-strain model for confined UHPC was developed. To examine the suitability of the modified models and the proposed model for confined UHPC, axial stress-strain curves derived from the proposed models were compared with those obtained from previous test results. After validating the proposed model, an extensive parametric study was undertaken to investigate the effects of diameter-to-thickness ratio, steel yield strength and concrete compressive strength on the complete axial stress-strain curves, the strength and strain enhancement of UHPC confined by circular steel tube stub columns.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.209-217
• /
• 1991

본 연구에서는 이러한 제반 문제점들을 보완하여 피로균열 선단의 국소영역에 서의 변형율상태를 실시간적으로 정도 높게 측정할 수 있는 새로운 변형율측정법인 미 소원형격자변형율측정법(fine dot grid strain measurement method)을 이용하였다. 그 결과, 균열선단의 국소영역에서의 피로변형율상태를 명확히 밝혀냄은 물론 이를 기 초로 하여 국소피로변형율장을 대표할 수 있는 피로변형율확대계수 .DELTA.A를 제안하였으 며 그 유효성에 대하여 명백히 하였다.

• Imaging Science in Dentistry
• /
• 제50권1호
• /
• pp.73-79
• /
• 2020

Computed tomography (CT) and magnetic resonance imaging (MRI) can be useful for the evaluation of palatal lesions, and strain elastography (performed together with intraoral ultrasonography) is a relatively new sonographic imaging modality. This report describes 2 clinical cases in which strain elastography was used to assess palatal tumors in conjunction with intraoral ultrasonography, CT, and MRI. In the first case, diagnosed as a myoepithelioma, the strain was determined to be 0.000% (strain of normal tissue, 0.556%). In the second case, diagnosed as an adenoid cystic carcinoma, the determined strain was 0.000% (strain of normal tissue, 1.077%). Therefore, we conclude that intraoral strain elastography can be useful for evaluating palatal lesions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1572-1579
• /
• 2005

New procedure for evaluation of creep reduction factor using performance limit strain concept was introduced and confirmed through the creep test results. To determine the performance limit strain of the textile geogrid used in this study, the Sherby-Dorm Plots were applied and the results were compared with the results that applied existed limit strain criteria (GRI test method GG-4). The limit creep strain of the geogrid samples that determined by using the Sherby-Dorm Plots were all 11%. This value is more higher than the existed criteria as 10%. From this 11% limit strain the creep reduction factors were calculated at 100,000 hours design. It was resulted in 1.45 for all of the geogrid samples(8t/m, 10t/m). Finally, when it was compared with the creep reduction factors that using 10% criteria, there were some decrease of reduction factor values about $0.06{\sim}0.14$.

• 가정과삶의질연구
• /
• 제23권6호
• /
• pp.117-131
• /
• 2005

In this paper, 1 examined role gratification and role strain of South Korean working mothers. The results show that South Korean working mothers experienced very similar level of role gratification and role strain as taking their multiple roles. The findings also show that the factors of caregiving demands, employment demands, caregiving resources, employment resources are not strongly related to role gratification and role strain. Among the 12 caregiving demand variables and employment demand variables, number of children, type of family, number of hours worked were significantly related to producing role gratification. Among the 12 caregiving demand variables, number of hours worked, number of husbands absence due to night work were significantly related to producing role strain. Among the 8 caregiving resources, participants satisfaction due to income contribution, look to make a purchase new electric home appliances were significantly related to produce role satisfaction. Among the 8 caregiving resources, number of family support policies in the husbands workplace, participants satisfaction due to income contribution were significantly related to producing role strain.