Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Assessment of stress-strain model for UHPC confined by steel tube stub columns

  • Hoang, An Le (Division of Construction Computation, Institute for Computational Science, Ton Duc Thang University) ;
  • Fehling, Ekkehard (Faculty of Civil and Environmental Engineering, Institute of Structural Engineering, University of Kassel)
  • Received : 2017.01.16
  • Accepted : 2017.04.25
  • Published : 2017.08.10
⟨ Previous Next ⟩

Abstract

Ultra high performance concrete (UHPC) has recently been applied as an alternative to conventional concrete in construction due to its extremely high compressive and tensile strength, and enhanced durability. However, up to date, there has been insufficient information regarding the confinement behavior of UHPC columns. Therefore, this study aims to perform an assessment of axial stress-strain model for UHPC confined by circular steel tube stub columns. The equations for calculating the confined peak stress and its corresponding strain of confined concrete in existing models suggested by Johansson (2002), Sakino et al. (2004), Han et al. (2005), Hatzigeorgiou (2008) were modified based on the regression analysis of test results in Schneider (2006) in order to increase the prediction accuracy for the case of confined UHPC. Furthermore, a new axial stress-strain model for confined UHPC was developed. To examine the suitability of the modified models and the proposed model for confined UHPC, axial stress-strain curves derived from the proposed models were compared with those obtained from previous test results. After validating the proposed model, an extensive parametric study was undertaken to investigate the effects of diameter-to-thickness ratio, steel yield strength and concrete compressive strength on the complete axial stress-strain curves, the strength and strain enhancement of UHPC confined by circular steel tube stub columns.

Keywords

References

  1. Aboutaha, R.S. and Machado, R. (1998), "Seismic resistance of steel confined reinforced concrete (SCRC) columns", Struct. Des. Tall Build., 7, 251-260. https://doi.org/10.1002/(SICI)1099-1794(199809)7:3<251::AID-TAL112>3.0.CO;2-J
  2. An L.H., Fehling, E. and Ismail, M. (2016), "Numerical modelling of circular concrete filled steel tube stub columns", Proceedings of HiperMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, Kassel, March.
  3. An, L.H. and Fehling, E. (2016), "Finite element analysis of circular steel tube confined UHPC stub columns", Rilem proceedings No. 105 of 1st International Conference on UHPC Materials and Structures (UHPC 2016-China), Changsha, China, October.
  4. An, L.H. and Fehling, E. (2017a), "Numerical analysis of circular steel tube confined UHPC stub columns", Comput. Concrete, 19(3), 263-273. https://doi.org/10.12989/cac.2017.19.3.263
  5. An, L.H. and Fehling, E. (2017b), "Analysis of circular steel tube confined UHPC stub columns", Steel Compos. Struct., 23(6), 669-682. https://doi.org/10.12989/SCS.2017.23.6.669
  6. Binici, B. (2005), "An analytical model for stress-strain behavior of confined concrete", Eng. Struct., 27(7), 1040-1051. https://doi.org/10.1016/j.engstruct.2005.03.002
  7. De Oliveira, W.L.A., De Nardin, S., De Cresce El Debs, A.L.H. and El Debs, M.K. (2010), "Evaluation of passive confinement in CFT columns", J. Constr. Steel Res., 66(4), 487-495. https://doi.org/10.1016/j.jcsr.2009.11.004
  8. Ding, F.X., Tan, L., Liu, X.M. and Wang, L. (2017), "Behavior of circular thin-walled steel tube confined concrete stub columns", Steel Compos. Struct., 23(2), 229-238. https://doi.org/10.12989/scs.2017.23.2.229
  9. Empelmann, M., Teutsch, M. and Steven, G. (2008) "Load-bearing behaviour of centrically loaded UHPFRC-columns", Proceeding of Second International Symposium on Ultra High Performance Concrete, Kassel, Germany.
  10. Fehling, E., Schmidt, M., Walraven, J., Leutbecher, T. and Frohlich, S. (2014), Ultra-High Performance Concrete: Fundamental-Design-Example, Wilhelm Ernst & Sohn, Verlag fur Architektur und technische Wissenschaften GmbH & Co. KG, Rotherstrasse 21, 10245 Berlin, Germany.
  11. Graybeal, B.A. (2005), "Characterization of the behavior of ultrahigh performance concrete", Ph.D. Dissertation, University of Maryland, USA.
  12. Guler, S. (2014), "Axial behavior of FRP-wrapped circular ultra high performance concrete specimens", Struct. Eng. Mech., 50(6), 709-722. https://doi.org/10.12989/sem.2014.50.6.709
  13. Guler, S., Aydogan, M. and Copur, A. (2013), "Axial capacity and ductility of circular UHPC-filled steel tube columns", Mag. Concrete Res., 65(15), 898-905. https://doi.org/10.1680/macr.12.00211
  14. Han, L.H., Li, W. and Bjorhovde, R. (2014), "Development and advanced applications of concrete-filled steel tubular (CFST) structures: members", J. Constr. Steel Res., 100, 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016
  15. Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Test and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Constr. Steel Res., 61, 1241-1269 https://doi.org/10.1016/j.jcsr.2005.01.004
  16. Hatzigeorgiou, G.D. (2008), "Numerical model for the behavior and capacity of circular CFT columns, Part I: Theory", Eng. Struct., 30(6), 1573-1578. https://doi.org/10.1016/j.engstruct.2007.11.001
  17. Hosinieh, M.M., Aoude, H., Cook, W.D. and Mitchell, D. (2015), "Behavior of ultra-high performance fiber reinforced concrete columns under pure axial loading", Eng. Struct., 99, 388-401. https://doi.org/10.1016/j.engstruct.2015.05.009
  18. Huang, F., Yu, X. and Chen, B. (2012), "The structural performance of axially loaded CFST columns under various loading conditions", Steel Compos. Struct., 13(5), 451-471. https://doi.org/10.12989/scs.2012.13.5.451
  19. Johansson, M. (2002), "The efficiency of passive confinement in CFT columns", Steel Compos. Struct., 2(5), 379-396. https://doi.org/10.12989/scs.2002.2.5.379
  20. Liang, Q.Q. and Fragomeni, S. (2009), "Nonlinear analysis of circular concrete-filled steel tubular short columns under axial loading", J. Constr. Steel Res., 65(12), 2186-2196. https://doi.org/10.1016/j.jcsr.2009.06.015
  21. Liew, J.Y.R. and Xiong, D.X. (2010), "Experimental investigation on tubular columns infilled with ultra-high strength concrete", Tubular Structures XIII, The University of Hong Kong, 637-645.
  22. Liew, J.Y.R. and Xiong, D.X. (2012), "Ultra-high strength concrete filled composite columns for multi-storey building construction", Adv. Struct. Eng., 15(9), 1487-1503. https://doi.org/10.1260/1369-4332.15.9.1487
  23. Liew, J.Y.R. and Xiong, M.X. (2015), Design Guide For Concrete Filled Tubular Members With High Strength Materials to Eurocode 4, Research Publishing, Blk 12 Lorong Bakar Batu, 349568 Singapore.
  24. Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2014), "Design of high strength concrete filled tubular columns for tall buildings", Int. J. High-Rise Build., 3(3), 215-221.
  25. Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2016), "Design of concrete filled tubular beam-columns with high strength steel and concrete", Struct., 8, 215-221.
  26. Liu, J., Zhang, S., Zhang, X. and Guo, L. (2009), "Behavior and strength of circular tube confined reinforced-concrete (CTRC) columns", J. Constr. Steel Res., 65, 1447-1458. https://doi.org/10.1016/j.jcsr.2009.03.014
  27. Liu, S.H., Li, L.H. and Feng, J.W. (2012), "Study on mechanical properties of reactive powder concrete", J. Civil Eng. Constr., 1(1), 6-11.
  28. Morino, S., Uchikoshi, M. and Yamaguchi, I. (2001), "Concretefilled steel tube column system-its advantages", Steel Struct., 1, 33-44. https://doi.org/10.12989/scs.2001.1.1.033
  29. O'Shea, M.D. and Bridge, R.Q (2000), "Design of circular thinwalled concrete filled steel tubes", J. Struct. Eng., ASCE, 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  30. Sakino, K., Nakahara, H. Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  31. Samani, A.K. and Altard, M.M. (2012), "A stress-strain model for uniaxial and confined concrete under compression", Eng Struct., 41, 335-349. https://doi.org/10.1016/j.engstruct.2012.03.027
  32. Schneider, H. (2006), "Zum tragverhalten kurzer, umschnurter, kreisförmiger, druckglieder aus ungefasertem UHFB", Ph.D. Dissertation, University of Leipzig, Leipzig, Germany. (in German)
  33. Shin, H.O., Soon, Y.S., Cook, W.D. and Michell, D. (2015), "Effect of confinement on the axial load response of Ultrahighstrength concrete columns", J. Struct. Eng., ASCE, 141(6), 04014151. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001106
  34. Sun, Y. (2008), "Proposal and application of stress-strain model for concrete confined by steel tubes", Proceeding of the 14th World Conference on Earthquake Engineering, October, Beijing, China.
  35. Susantha, K.A.S., Ge, H. and Usami, T. (2001), "Uniaxial stressstrain relationship of concrete confined by various shaped steel tubes", Eng. Struct., 23(10), 1331-1347. https://doi.org/10.1016/S0141-0296(01)00020-7
  36. Tang, J., Hino, S., Kuroda, I. and Ohta, T. (1996), "Modeling of stress-strain relationships for steel and concrete in concrete filled circular steel tubular columns", Steel Constr. Eng., JSSC, 3(11), 35-46.
  37. Tao, Z., Wang, Z.B, Yu, Q. (2013), "Finite element modelling of concrete filled steel stub columns under axial compression", J. Constr. Steel Res., 89, 121-131. https://doi.org/10.1016/j.jcsr.2013.07.001
  38. Tue, N.V., Kuchler, M., Schenck, G. and Jurgen, R. (2004b), "Application of UHPC filled tubes in buildings and bridges", Proceeding of International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  39. Tue, N.V., Schneider, H., Simsch, G. and Schmidt, D. (2004a), "Bearing capacity of stub columns made of NSC, HSC and UHPC confined by a steel tube", Proceeding of International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  40. Xiong, D.X. (2012), "Structural behaviour of concrete filled steel tube with high strength materials", Ph.D. Dissertation, National University of Singapore, Singapore.
  41. Yan, P.Y. and Feng, J.W. (2008), "Mechanical behavior of UHPC and UHPC filled steel tubular stub columns", Proceeding of Second International Symposium on Ultra High Performance Concrete, Kassel, Germany.
  42. Yang, X., Zohrevand, P. and Mirmiran, A. (2015), "Behavior of Ultrahigh-Performance concrete confined by steel", J. Mater. Civil Eng., ASCE, 28(10), 04016113.
  43. Yang, Z., Fu, G.Y., Yu, C.J., Chen, B., Zhao, S.X. and Li, S.P. (2016), "Experimental behavior of circular flyash-concretefilled steel tubular stub columns", Steel Compos. Struct., 22(4), 821-835. https://doi.org/10.12989/scs.2016.22.4.821
  44. Yu, Q., Tao, Z., Liu, W. and Chen, Z.B. (2010), "Analysis and calculations of steel tube confined concrete (STCC) stub columns", J. Constr. Steel Res., 66(1), 53-64. https://doi.org/10.1016/j.jcsr.2009.08.003
  45. Zohrevand, P. and Mirmiran, A. (2011), "Behavior of ultrahighperformance concrete confined by fiber reinforced polymers", J. Mater. Civil Eng., ASCE, 23(12), 1727-1734. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000324