• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.800-812
• /
• 2014

The paper provides some results of a new procedure to analyze the hydrodynamic aspects of the interactions between maritime emerged breakwaters and waves by integrating CAD and CFD. The structure is modeled in the numerical domain by overlapping individual three-dimensional elements (Tetrapods), very much like the real world or physical laboratory testing. Flow of the fluid within the interstices among concrete blocks is evaluated by integrating the RANS equations. The aim is to investigate the reliability of this approach as a design tool. Therefore, for the results' validation, the numerical run-up and reflection effects on virtual breakwater were compared with some empirical formulae and some similar laboratory tests. Here are presented the results of a first simple validation procedure. The validation shows that, at present, this innovative approach can be used in the breakwater design phase for comparison between several design solutions with a significant minor cost.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.74-85
• /
• 2002

The numerical experiment has been conducted to investigate the unsteady shock wave reflecting phenomena. The cell-vertex finite-volume, Roe's upwind flux difference splitting method with unstructured grid is implemented to solve unsteady Euler equations. The $4^{th}$-order Runge-Kutta method is applied for time integration. A linear reconstruction of the flux vector using the least-square method is applied to obtain the $2^{nd}$-order accuracy for the spatial derivatives. For a better resolution of the shock wave and slipline, the dynamic grid adaptation technique is adopted. The new concept of grid adaptation technique, which is much simpler than that of conventional techniques, is introduced for the current study. Three error indicators (divergence and curl of velocity, and gradient of density) are used for the grid adaptation procedure. Considering the quality of the solution and the numerical efficiency, the grid adaptation procedure was updated up to $2^{nd}$ level at every 20 time steps. For the convenience of comparison with other experimental and analytical results, the case of interaction between the straight incoming shock wave and a sharp wedge is simulated for various flow conditions. The numerical results show good agreement with other experimental and analytical results, in the shock wave reflecting structure, slipline, and the trajectory of the triple points. Some critical cases show disagreement with the analytical results, but these cases also have been proven to show hysteresis phenomena.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.17-28
• /
• 1999

A new procedure of the boundary element method(BEM),say, singular BEM for the potential problems with singularities is presented. To obtain the numerical solution of which asymptotic behavior near the singularities is close to that of the analytic solution, we use particular elements on the boundary segments containing singularities. The Motz problem and the crack problem are taken as the typical examples, and numerical results of these cases show the efficiency of the present method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1067-1072
• /
• 2003

Generally dual mass flywheel(DMF) is used as a solution to reduce noise and vibration of power train system and to improve the comfortability of passenger car. In this paper, design concept of new DMF model, analytical/numerical model, test procedure and tuning results are presented. Design parameters are studied by some numerical methods and tests. As the result, we can find more efficient model of DMF and reduce vibration level in power train system.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.1041-1049
• /
• 2003

In this paper, a new local two-point approximation method which is based on the exponential intervening variable is proposed. This new algorithm, called the Two-Point Convex Approximation(TPCA), use the function and design sensitivity information from the current and previous design points of the sequential approximate optimization to generate a sequence of convex, separable subproblems. This paper describes the derivation of the parameters associated with the approximation and the numerical solution procedure. In order to show the numerical performance of the proposed method, a sequential approximate optimizer is developed and applied to solve several typical design problems. These optimization results are compared with those of other optimizers. Numerical results obtained from the test examples demonstrate the effectiveness of the proposed method.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2000년도 춘계 학술발표회 논문집
• /
• pp.43-50
• /
• 2000

The flow field of a 1 Ton/Day entrained-flow gasifier constructed in KIER was numerical simulate in this paper. The standard $k-{\varepsilon}$ turbulence model and simple procedure was used with the Primitive-Variable methods during computation. In order to find the influence factors of the flow field which may have great effects on coal gasification process inside gasifier, difference geometry parameters at various operating conditions were studied by simulation methods. The calculation results show that the basic shape of the flow field is still parabolic even the oxygen gas is injected from the off-axis position. There exist an obvious external recirculation zone with a length less than 1.0m and a small internal recirculation region nears the inlet part. The flow field inside the new gasifier is nearly similar as that of the old 0.5T/D gasifier at same position if the design of burner remains unchanged.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.324-331
• /
• 2000

In this study, a new algorithm analyzing dynamic crack propagation problem by the coupling technique of Meshfree Method and Finite Element Method is proposed. The coupling procedure of two methods is presented with a short description of Meshfree Method especially, Element-free Galerkin (EFG) method. The elastodynamic fracture theory is presented, and a numerical implementation procedure for dynamic fracture analysis by Meshfree Method is also discussed. A couple of dynamic crack propagation problems illustrate the performance of the propsed technique. The accuracy of numerical solutions by the developed algorithm are compared with those of analytical solutions and experimental ones.

• 한국경영과학회지
• /
• 제23권4호
• /
• pp.131-140
• /
• 1998

The objective of this study is to propose a new procedure to synthesize the multi-experts priorities in AHP. If multi-experts with different expertise are involved in a AHP decision, we need some way to aggregate their opinions. AHP model used to do numerical aggregation by taking only the geometric mean or the weighting geometric mean in past. To aggregate the multi-experts priorities, In this paper. we suggest a way which Decision Maker can exclude outlier matrix from group using the concept of the Compatibility and we Introduce Delphi method to use Compatibility in AHP. A numerical example is shown to illustrate the procedure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.173-176
• /
• 2002

The purpose of this study is to develop a tool for the analysis of the cavitating flow around trans-cavitating marine propellers. In this study, a linearized super-cavitation theory was applied in order to analyze the performance of the 2-dimensional foils. The numerical results correlated very well with experimental data. The trans-cavitating propellers, manufactured and tasted in KRISO, is selected to validate the lifting surface procedure. For a TCP with a Johnson's five term section, the comparison between the numerical prediction and experiments is fairly good and promising. The new lifting surface procedure, developed and validated with 2-D foils and a TCP, is generally considered applicable to the practical design of the trans-cavitating propeller with Johnson's five term section

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.157-166
• /
• 2001

In general, the cutting pattern of the membrane structures is determined by dividing the complicated curved 3-D surface into several 2-D plane strip by using flattening technique. In this procedure, however, some discrepancies ore occurred between actual stresses of equilibrated state and designed uniform stresses because the material properties are not considered. These deviations can cause the critical structural problems, wrinkling or overstress, and thus a optimization process should be considered. In this paper, a new analytical method for determining an optimum cutting pattern considering material properties is presented. Here, iterative procedure is introduced to decrease the errors caused in numerical process. The optimization method proposed can diminish the deviations occurred by material properties and numerical errors, simultaneously. As a results, it is shown that the final stress distributions for the HP shell model are sufficiently near to design stress distributions, and it can be concluded that this method can be used to obtain the optimized cutting pattern of membrane structures.