• International Journal of Contents
• /
• v.15 no.1
• /
• pp.52-57
• /
• 2019

The purpose of this research is to evaluate teachers' perception of Korean's achievement standard-based testing system (ASTS) and its process of implementation, and to propose a method of evaluating students' academic aptitude based on university entrance examinations. The core of the 2015 Revised National Curriculum is asserted by changes in classroom instruction, specifically encouraging students' participation in class based on a new method to evaluate student achievement. A total of 124 teachers in charge of student career counseling in middle and high schools in the Jeonbuk province participated in the study. The schools implementing the new method of ASTS were using 61.6% for unit school cut-off point, as opposed to the existing fixed cut-off point of 38.4%. The teachers understanding of the achievement evaluation method was rated 3.54 on the 5-point Likert scale, implying that they had a relatively good understanding of the method. Some of the challenges associated with reflecting the scores from the new student ASTS include difficulty of comparing scores across schools; grade inflation; advantages and disadvantages associated with the type of high school; and the increased importance of university entrance examination. In the ASTS, the fairness during the evaluation of the high school grades and the consequently the reliability of the evaluation prove worrying. As an ultimate result, selecting students based on university admissions data became untrustworthy. There should be further discussions on how students' achievement obtained from the new ASTS should be applied during the university admission process and how students' academic aptitude can be assessed in order to set a direction for secondary school education.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.54-60
• /
• 2000

There are many works to analyze a simple expansion chamber involving higher order modes. These works are classified to mode matching method, velocity potential method and finite element method. Among these methods, mode matching method has good performance at analyzing a concentric expansion chamber. Generally inlet/outlet pipe cross section area is smaller than middle chamber cross section area. So the number of higher order modes of inlet/outlet pipe can be fewer than that of middle chamber. But mode matching method must use the same number of higher order modes at inlet pipe, middle chamber and outlet pipe. Therefore the redundant modes of inlet/outlet pipe makes the computation time of mode matching method longer. In this paper, the new method, which can select number of each higher order modes of inlet pipe, middle chamber and outlet pipe, was suggested. And this method was compared to conventional mode matching method and finite element method in order to demonstrate the accuracy of the new method and to show that the new method can reduce a calculating time.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.144-156
• /
• 2018

Level 3 Probabilistic Safety Assessment (PSA) is performed for the risk assessment that calculates radioactive material dispersion to the environment. This risk assessment is performed with a tool of MELCOR Accident Consequence Code System (MACCS2 or WinMACCS). For the off-site consequence analysis of multi-unit nuclear power plant (NPP) accident, the single location (Center Of Mass, COM) method has been usually adopted with the assumption that all the NPPs in the nuclear site are located at the same COM point. It was well known that this COM calculation can lead to underestimated or overestimated radionuclide concentration. In order to overcome this underestimation or overestimation of radionuclide concentrations in the COM method, Multiple Location (ML) method was developed in this study. The radionuclide concentrations for the individual NPPs are separately calculated, and they are summed at every location in the nuclear site by the post-processing of radionuclide concentrations that is based on two-dimensional Gaussian Plume equations. In order to demonstrate the efficiency of the ML method, radionuclide concentrations were calculated for the six-unit NPP site, radionuclide concentrations of the ML method were compared with those by COM method. This comparison was performed for conditions of constant weather, yearly weather in Korea, and four seasons, and the results were discussed. This new ML method (1) improves accuracy of radionuclide concentrations when multi-unit NPP accident occurs, (2) calculates realistic atmospheric dispersion of radionuclides under various weather conditions, and finally (3) supports off-site emergency plan optimization. It is recommended that this new method be applied to the risk assessment of multi-unit NPP accident. This new method drastically improves the accuracy of radionuclide concentrations at the locations adjacent to or very close to NPPs. This ML method has a great strength over the COM method when people live near nuclear site, since it provides accurate radionuclide concentrations or radiation doses.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.25-46
• /
• 1998

This paper shows that there are the results of a series of model tests on the behavior of single pipe pile which is subjected to lateral load in, Nak-dong River sand. The purpose of the present paper is to estimate the effect of Non-homogeneity. constraint condition of pile head, lateral load velocity, relative density, and embedded length of pile on the behavior of single pile. These effects can be quantified only by the results of model tests. Also, these are compared with the results of the numerical methods (p-y method, modified Vlasov method; new ${\gamma}$ parameter, Characteristic Load Method'CLM). In this study, a new ${\gamma}$ parameter equation based on the Vlasov method was developed to calculate the modulus of subgrade reaction (E. : nhz.) proportional to the depth. The p-y method of analysis is characterized by nonlinear behavior. and is an effective method of designing deep foundations subjected to lateral loads. The new method, which is called the characteristic load method (CLM). is simpler than p-y analysis. but its results closely approximates p-y analysis results. The method uses dimensional analysis to characterize the nonlinear behavior of laterally loaded piles with respect to be relationships among dimensionless variables. The modulus of subgrade reaction used in p-y analysis and modified Vlasov method obtained from back analysis using direct shear test (DST) results. The coefficients obtained from DST and the modified ones used for the prediction of lateral behavior of ultimate soil reaction range from 0.014 to 0.05. and from 0.2 to 0.4 respectively. It is shown that the predicted numerical results by the new method (CLM), p-y analysis, and modified Vlasov method (new parameter) agree well with measured results as the relative density increases. Also, the characteristic load method established applicability on the Q-Mnu. relationship below y/D=0.2.

• Journal of Arbitration Studies
• /
• v.16 no.1
• /
• pp.45-80
• /
• 2006

The purpose of this paper is to make research on the method of arbitration agreement, the adoption and contents of the Convention on the Use of Electronic Communications in International Contracts, and the standpoint and problem with reference to the new Convention's application to the method of arbitration agreement in New York Convention. Last year the UN General Assembly and UNCITRAL adopted a new Convention on the Use of Electronic Communications in International Contracts that makes agreements by electronic communications enforceable, including arbitration agreements under the Convention on the Recognition and Enforcement of Foreign Arbitral A wards (New York Convention). Aimed at enhancing legal certainty and commercial predictability where electronic communications are used in relation to international contracts, the provisions of the Convention deal with, among other things, determining a party's location in an electronic environment; the time and place of dispatch and receipt of electronic communications; and the use of automated message systems for contract formation. Under the New York Convention, arbitration agreements in international contracts must be reduced to writing before they can be enforced. But under the new Convention, an arbitration agreement made entirely in electronic form would be enforceable. The working group expressed overall support in favor of the inclusion of a reference to the New York Convention in the new Convention. However, one proposal was that the exclusions provided under article 2 of the new Convention might be too broadly worded to adequately accommodate the New York Convention. In conclusion, Korea's government authorities should take prompt measures to sign and ratify the new Convention, and declare on the scope of its application. Also Korea's arbitration institute should make preparation for the amendment of the arbitration act and arbitration rules in accordance with the new Convention.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.121-128
• /
• 2000

The scope of this paper is focused to the systems which have the time period and they should be necessarily studied in the sense of stability and design method of controller to stabilize the orignal unstable systems. In general, the time periodic systems or the systems having same motions during certain time interval are easily found in rotating motion device, i.e., satellite or helicopter and widely used in factory automation systems. The characteristics of the selected dynamic systems are analyzed with the new stability concept and stabilization control method based on Lyapunov direct method. The new method from Lyapunov stability criteria which satisfies the energy convergence is studied with linear algebraic method. And the numerical procedures are developed with computational programming method to apply to the practical linear periodic systems. The results from this paper demonstrate the usefulness in analysis of the asymptotic stability and stabilization of the unstable linear periodic system by using the developed simulation procedures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.461-464
• /
• 2003

A new control volume finite element method is proposed for three dimensional analysis of polymer flow. Tetrahedral finite element is employed and co-located interpolation procedure for pressure and velocity is implemented. Inclusion of pressure gradient term in the velocity shape functions prevents the checkerboard pressure field from being developed. Vectorial nature of pressure gradient is considered in the velocity shape function so that velocity profile in the limit of very small Reynolds number becomes physically meaningful. The proposed method was verified through three dimensional simulation of pipe flow problem for Newtonian and power-law fluid. Calculated pressure and velocity field showed an excellent agreement with analytic solutions for pressure and velocity. Driven-cavity problem, which is reported to yield checkerboard pressure filed when conventional finite element method is applied, could be solved without yielding checkerboard pressure field when the proposed control volume finite element method was applied. The proposed method could be successfully applied to the three dimensional mold filling problem.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.808-813
• /
• 2007

We present the numerical characteristics of a new true stress-strain curve acquisition method over a large range of strains by the tensile test and a finite element method through comparing the results obtained by various finite element mesh systems. The method is introduced in detail. The effects of the finite element mesh systems on the results are investigated to show its numerical characteristics of the new method. It is shown that the method is quite robust, implying that it can be used as a special function of the tensile test machines.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.9
• /
• pp.660-669
• /
• 1987

Routh approximation method is the most computationally attractive. But this method may cause time-response error because this method does not match the time-response directly. In this paper a new mixed method for obtaining stable reduced-order models for high-order continuous-time systems is proposed. It makes use of the advantages of the Routh approximation method and the Minimization of Integral Squared Error(MISE) criterion approach. In this mixed method the characteristic polynomial of the reduced-order model is first obtained from that of original system by using the Auxiliary Denominator Polynomial(ADP). The numerator polynomial is then determined so as to minimize the intergral squared-error of unit step responses. The advantages of the propsed method are that the reduced models are always stable if the original system are stable and the frequency domain and time domain characteristic of the original system will be preserved in the reduced models.