• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2382-2390
• /
• 2007

A new polynomial-based predistortion method for linearizing nonlinear power amplifier is proposed. The proposed method finds the predistortion parameter directly without the help of postdistorter whereas most existing polynomial-based predistortion methods calculate the predistortion parameter indirectly from the prostdistorter. First, a new predistortion algorithm is derived based on the assumption that the characteristic of the amplifier is modeled by piecewise linear function. Then it is modified into a proposed method which does not require any assumption or prior knowledge of the amplifier. The proposed method is derived based on the RLS (recursive least squares) algorithm. The proposed technique is simpler to implement than the existing methods and the computer simulation demonstrates that the proposed method is more robust to the initial condition and the saturation region of the amplifier.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.527-532
• /
• 2021

In this paper, we propose an efficient finite field computation method for Rainbow algorithm, which is the only multivariate quadratic-equation based digital signature among the current US NIST PQC standardization Final List algorithms. Recently, Chou et al. proposed a new efficient implementation method for Rainbow on the Cortex-M4 environment. This paper proposes a new multiplication method over the finite field that can reduce the number of XOR operations by more than 13.7% compared to the Chou et al. method. In addition, a multiplicative inversion over that can be performed by a 4x4 matrix inverse instead of the table lookup method is presented. In addition, the performance is measured by porting the software to which the new method was applied onto RaspberryPI 3B+.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.674-680
• /
• 2022

In the present study, radiation shielding and protection ability of prepared Flyash-lime-Gypsum (FaLG) bricks has been studied in terms of energy exposure build up factors and dose parameters. The energy exposure build up factors of Flyash-lime-Gypsum (FaLG) bricks have been calculated for the energy range of 0.015 MeV-15 MeV and for penetration depth upto 40 mfp directly using a new and simplified Piecewise Linear Spline Interpolation Method (PLSIM). In this new method, the calculations of G.P fitting parameters are not required. The verification and accuracy of this new method has been checked by comparing the results of exposure build up factor for NBS concrete calculated using present method with the results obtained by using G.P fitting method. Further, the relative dose distribution and reduced exposure dose rate for various radioactive isotopes without any shielding material and with Flyash-lime-Gypsum (FaLG) bricks have been calculated in the energy range of 59.59-1332 keV. On the basis of the obtained results, it has been reported that the prepared Flyash-lime-Gypsum (FaLG) bricks possess satisfactory radiation shielding properties and can be used as environmentally safe storage facilities for low level nuclear waste.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.301-309
• /
• 2023

In this paper, a new modified conjugate gradient (MCG) method is presented which is based on a new gradient regularizer, and this method is used to identify the dynamic load on airfoil structure without and with considering random structure parameters. First of all, the newly proposed algorithm is proved to be efficient and convergent through the rigorous mathematics theory and the numerical results of determinate dynamic load identification. Secondly, using the perturbation method, we transform uncertain inverse problem about force reconstruction into determinate load identification problem. Lastly, the statistical characteristics of identified load are evaluated by statistical methods. Especially, this newly proposed approach has successfully solved determinate and uncertain inverse problems about dynamic load identification. Numerical simulations validate that the newly developed method in this paper is feasible and stable in solving load identification problems without and with considering random structure parameters. Additionally, it also shows that most of the observation error of the proposed algorithm in solving dynamic load identification of deterministic and random structure is respectively within 11.13%, 20%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.61-69
• /
• 2004

This paper presents a new analytical method for estimating the location of a target using directional data. Based on a nonlinear programming (NLP) problem formulated for the line method, which is a well known algorithm for two-dimensional location estimation, we present a method to find an optimal solution for the problem. Then we present a two-stage method for better location estimation based on the NLP problem. In addition, another two-stage method is presented for location estimation problems in which different types of observers are used to obtain directional data based on the analysis of the maximum likelihood estimate of the target location. The performance of the suggested method is evaluated through simulation experiments, and results show that the two-stage method is computationally efficient and highly accurate.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.426-430
• /
• 2000

This study is about the human sensibility measurement method. Researches on human sensibility measurement have been performed in many aspects. However, due to the subtlety and intricacy of human sensibility, it has been difficult to exactly measure human sensibility.At present, Semantic Differential(SD) method is most widely used to quantify human sensibility. In SD method, complicate human sensibility is represented on a scale with equal interval or equal ratio. However, this method has a critical problem in that human sensibility cannot be expressed with equal interval or equal ratio.In order to complement SD method and represent human sensibilities appropriately, we proposed an alternative method using the chroma-scale with saturation that had not equal interval or ratio. In experiment, proposed method shown that subjects understood a new scale easily and they could express their sensibilities on a new scale without any limitation. As a result, the chroma-scale can be used not only for measuring consumer's preference but also for evaluating or selecting sensibility words.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.12
• /
• pp.590-596
• /
• 2001

The pre-emphasis is an essential process for speech signal processing. Widely used two methods are the typical method using a fixed value near unity and te optimal method using the autocorrelation ratio of the signal. This study proposes a new pre-emphasis method using the short-term energy difference of speech signal, which can effectively compensate the glottal source characteristics and lip radiation characteristics. Using the proposed pre-emphasis, speech analysis, such as spectrum estimation, formant detection, is performed and the results are compared with those of the conventional two pre-emphasis methods. The speech analysis with 5 single vowels showed that the proposed method enhanced the spectral shapes and gave nearly constant formant frequencies and could escape the overlapping of adjacent two formants. comparison with FFT spectra had verified the above results and showed the accuracy of the proposed method. The computational complexity of the proposed method reduced to about 50% of the optimal method.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.3
• /
• pp.29-35
• /
• 1980

With installation of the computerized data acquisition system on the towing carriage of KRIS towing tank, the testing techniques of resistance test, propeller open-water test, self-propulsion test and wake survey at propeller disk were remarkably improved and automated. For the self-propulsion test a new method was developed with aid of a digital desk-top computer. This method is based on extracting advantages both from British method and Continental method, that is, the accuracy from the constant speed method and the effciency from the constant load method. The KRIS method has been successfully practized with the improved accuracy, stability and efficiency. Details of the new method are described in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.590-594
• /
• 2001

The residual DC properties in the in-plane switching (IPS) liquid crystal displays(LCDs) which have different concentrations of cynao NLCs and different resistivities of fluorine NLCs were studied. We also propose a new residual DC measurement method, named 'light minimum/maximum method'. We confirmed the precision of residual DC measurement by light minimum/maximum method compared with the flicker minimizing method and found that new measurement method of residual DC is more accurate than that of the conventional flicker minimizing method since the resolution level of measurements is in 0.1V.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.113-119
• /
• 1995

The green body was fabricated by a new forming method, pressureless powder packaing forming method, and the characteristics of sintered specimen were investigated. It was found that alumina ceramics prepared by the present method showed porous structure with narrow pore size distribution, and in case of abrasive powder sintered body, compared with dry-pressed specimen, had the nearly same density. Especially, the specimen prepared with spray-dried granules showed the characteristic that granules were not either deformed or fractured during forming and sintering process. Therefore, it was found that this new forming method was effective method in fabrication of porous ceramics on account of easy control of porosity and pore size and its high thermal stability.