• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.88-97
• /
• 2005

A new numerical scheme solving two-phase flow, the Hybrid VOF method for improved free surface capturing has been developed by combining a volume capturing VOF method with the Level-Set reinitialization procedure. For validation, the proposed method is applied to 3-D bubble rising problem, dam breaking and the free surface flow around a commercial container ship. The calculated results by using the Hybrid VOF method with the two previously applied VOF formulations are compared with available numerical and experimental data. It is found that the new method provides more reasonable results than the two previous ones.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.32-37
• /
• 2023

In this study, in order to propose a integrity evaluation for type IV high aspect ratio hydrogen storage vessel, a numerical analysis of the hoop tensile test and pressure test was performed using FEM software, and the results of the actual physical property test were reviewed. The property test and numerical analysis were compared, and very similar results were obtained with deviations of maximum tensile strength of 4.75% and fiber direction stress of 5.39%.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권7호
• /
• pp.959-967
• /
• 2004

Jain 등은 한 지문 영상에 특징점 기반 지문 정합 방법과 필터뱅크 기반 지문 정합 방법을 적용해 두 정합 방법의 성능을 혼합하는 혼합형 지문정합 방법을 제안하고, 이 방법이 두 가지 각 정합 방법에 비해 높은 성능을 보인다는 것을 실험을 통해 입증하였다［l］. 그러나 이 방법은 혼합을 수행할 때 두 정합 방법을 별도로 수행한 후, 각 방법의 정합도(matching score)에 가중치를 부여해 최종 정합도를 결정하므로 두 정합 방법의 특성을 상쇄 시키는 결과를 얻게 된다. 본 논문에서는 두 가지 정합 방법을 특징값 추출 과정에서 혼합하는 방법을 제안하였다. 이 방법은 필터뱅크 기반 방법보다는 낮은 ERR(Equal eRror Rate)을 보이나 특징점 기반 방법보다 높은 ERR을 보였다. 이에 본 논문에서는 적응적인 정합도 혼합방법을 제안하여, 두 가지 방법의 특성을 살리도록 적응적으로 정합도를 선택하는 방법을 취했다. 이 방법을 이용해 Jain 등의 혼합형 방법보다 더 낮은 ERR을 얻을 수 있었다. 제안한 방법에 따라 NIST Special Database 14 지문 데이타로 실험한 결과 ERR에서 약 1%의 성능 향상을 보였다.

• 한국육종학회지
• /
• 제41권3호
• /
• pp.279-283
• /
• 2009

A new yellow waxy corn hybrid "Daehakchal Gold 1" was developed from single cross between Yeongdeok Jaera and Okchen Jaera at Chungnam National University in 2007. Inbred CNU57 derived from Yeongdeok Jaera was used as the seed parent of Daehakchal Gold 1, and inbred CNU 27 derived from Okchen Jaera as the pollen parent. Tasseling date of this hybrid was seven day later than that of check hybrid, Chalok 1. Daehakchal Gold 1 was 19.7cm in ear length and 4.5cm in ear diameter. The yield of Daehakchal Gold 1 and check hybrid in dry matter were 146.5g and 113.9g per plant, respectively. On yield trial, which were increased 29.7% compared with a check hybrid, Chalok 1. Especially, Daehakchal Gold 1 had yellow kernels and good eating quality. The ratio of kernel set length/ear length was similar to Chalok 1. It is moderately resistant to Bioporalis maydis and corn borer. The yields of Daehakchal Gold 1 in fresh ear weight and in number of fresh ear were 16% and 8%, respectively, higher than those of a check hybrid in regional yield trials for three years. Seed production of this hybrid has gone well due to good match during crossing between seed and pollen parents.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.993-1001
• /
• 2024

The TANDEM project is a European initiative funded under the EURATOM program. The project started on September 2022 and has a duration of 36 months. TANDEM stands for Small Modular ReacTor for a European sAfe aNd Decarbonized Energy Mix. Small Modular Reactors (SMRs) can be hybridized with other energy sources, storage systems and energy conversion applications to provide electricity, heat and hydrogen. Hybrid energy systems have the potential to strongly contribute to the energy decarbonization targeting carbon-neutrality in Europe by 2050. However, the integration of nuclear reactors, particularly SMRs, in hybrid energy systems, is a new R&D topic to be investigated. In this context, the TANDEM project aims to develop assessments and tools to facilitate the safe and efficient integration of SMRs into low-carbon hybrid energy systems. An open-source "TANDEM" model library of hybrid system components will be developed in Modelica language which, by coupling, will extend the capabilities of existing tools implemented in the project. The project proposes to specifically address the safety issues of SMRs related to their integration into hybrid energy systems, involving specific interactions between SMRs and the rest of the hybrid systems; new initiating events may have to be considered in the safety approach. TANDEM will study two hybrid systems covering the main trends of the European energy policy and market evolution at 2035's horizon: a district heating network and power supply in a large urban area, and an energy hub serving energy conversion systems, including hydrogen production; the energy hub is inspired from a harbor-like infrastructure. TANDEM will provide assessments on SMR safety, hybrid system operationality and techno-economics. Societal considerations will also be encased by analyzing European citizen engagement in SMR technology safety.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.327-330
• /
• 2005

In this study, the nature of brittleness, one of the main problems of GFRP(Glass Fiber Reinforced Plastic) Re-bar, is improved. Therefore, Hybrid GFRP Rod is developed by attaching FBG sensor to the new GFRP Rod with toughness, essential for flexural reinforcement of the concrete. The test was performed with specimens of Hybrid GFRP Rod. According to the test, data measured by electric gauge sensor are compared with data measured by FBG sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.152-152
• /
• 2000

In this paper, we propose a new approach to intelligent motion and autonomous maneuvering of mobile robots using hybrid system. In high Level, the discrete states are defined by using the sensor-based search windows and the reference motions of a mobile robot as a low vevel are specified in the abstracted motions, The mobile robots can perform both the motion planning and autonomous maneuvering with obstacle avoidance in indoor navigation problem. Simulation and experimental results show that hybrid system approach is an effective method for the autonomous maneuvering in indoor environments.

• 천문학논총
• /
• 제30권2호
• /
• pp.737-739
• /
• 2015

To accommodate today's higher education student, fewer textbooks are printed and more are becoming digital. Keeping with the modern era, hybrid versions of textbooks have all end-of-chapter assessment content moved to digital learning systems such as MindTap$^{TM}$ by Cengage $Learning^{(R)}$. In this work, we introduce new pedagogical strategies to combat academic e-cheating, specifically cheating on assessments given in online astronomy courses. The strategies we present in this work are employed in Horizons: Exploring the Universe, Hybrid, 13th Edition, and Universe, Hybrid, 8th Edition, by Seeds, Backman, and Montgomery.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권1호
• /
• pp.71-81
• /
• 1995

In this paper, a new speed control scheme for induction motor drives that regular sampled PWM and harmonic elimination switching pattern over the full range of output speed is presented. The proposed scheme(hybrid scheme) provides three mode and guarantees smooth voltage boost. A detailed description of the scheme, along with the relalization aspect, is described. Moreover, methods of compensating for dead time and optical transmission system of drive signal are proposed and investigated. Finally, experimental investigation of hybrid scheme is presented.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.291-297
• /
• 2013

Hydraulic directional control valves actuated by solenoid are used to control emergency steering in general or hybrid electric commercial vehicles. In this study, a new lightweight hydraulic directional control valve was designed by flow and structural simulation, and was fabricated; the basic operation, pressure differentials, and inner leakage flow were evaluated experimentally. In the results, the new model showed comparable performance with an existing imported valve. New valve was 80% the weight of the existing valve and had few components. Installing this valve on a truck body is easier because of its compactness and small size.