• 터널과지하공간
• /
• 제22권1호
• /
• pp.12-21
• /
• 2012

암석의 파괴조건식으로 널리 이용되고 있는 Mohr-Coulomb식과 Hoek-Brown식은 중간주응력을 고려하지 못한다. 그러나 암석의 진삼축압축시험 결과에 의하면 암석의 강도는 중간주응력의 크기에 상당한 영향을 받는 것으로 알려지고 있다. 따라서 암반구조물의 정밀한 안정성 평가를 위해서는 중간주응력의 영향을 고려할 수 있는 파괴조건식이 필요하다. 이 연구에서는 Jiang & Pietruszczak(1988)이 제안한 팔면체면 단면 형상함수를 이용하여 Hoek-Brown 파괴조건식에 근사하는 새로운 3차원 비선형 암석파괴조건식을 제안하였다. 대응되는 선형파괴조건식의 강도예측 결과와 비교검토를 통해 제안한 파괴조건식의 강도예측 성능을 평가하였다. 제안한 파괴조건식을 문헌에 보고된 6개 암종의 진삼축압축시험 결과에 적합시킨 결과 매우 우수한 적합성을 얻었다. 특히, 구속압이 낮은 영역의 진삼축압축강도를 포함한 자료에 대해서는 선형 파괴조건식에 비해 뛰어난 적합성을 보였다.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.1-5
• /
• 2020

In this study, the objective is to improve the criteria used for statistical comparison of the VLF tanδ (TD) database and failure rate according to water-tree degradation in underground distribution power cables. The aging condition of the KEPCO criteria is divided into 6 levels using the Weibull distribution, and the "failure imminent" condition is quantified by using the statistical end-point of the lifetime parameter of the VLF big-data group obtained from KEPCO. Moreover, new criteria with a 2-dimensional combination of TD, DTD, and a statistical normalized factor are suggested. These criteria exhibit high reproducibility for the detection of cables in an imminent failure state. Consequently, it is expected that the adoption of the extended VLF-2019 criteria will reduce the asset management cost of cable replacement compared to the VLF-2012 criteria of KEPCO.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.312-319
• /
• 2004

This paper is mai y focused to develop new concrete material model such as ultimate failure surface in compression-compression region, hardening rule and cracking criteria which are basically used in the nonlinear finite element analysis of nuclear prestressed concrete containment building. From the Kepri's experimental results, failure surface of the concrete based on the elasto-plastic material model is modified and new cracking criteria is proposed. Nonlinear FE analysis program using a new material model is implemented to analysis plane concrete. Finally, numerical simulation to compare the performance of the new material model with experimental results is employed. The numerical results by the proposed model in this study agree very well with the experimental data.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.107-110
• /
• 2004

In this paper, a new structural health monitoring technique for composite laminates through the use of embedded fiber Bragg grating (FBG) sensors is presented. The method traces the ply stress states of a laminate and compares them with failure criteria during the service time of structures. The ply stress state of every ply composing the composite laminate can be obtained using classical lamination theory by embedded FBG sensors in the laminate. Graphite/epoxy laminate specimens, embedded with three FBG sensors, were fabricated. Tension tests were performed to evaluate the ply stress states tracing technique. Experimental results show that laminates experience fracture when the ply stress states are over the boundaries of failure criteria. In this method, critical damage can be detected by the ply stress states which are close to the boundaries of the failure criteria.

• 한국터널지하공간학회 논문집
• /
• 제7권1호
• /
• pp.51-61
• /
• 2005

터널의 주변지반을 보강할 경우 지반의 강도정수는 변화한다. 그러므로 보강된 터널주변지반의 지보, 보조 및 보강, 굴착설계 시 보강된 주변지반의 강도기준에 대하여 고려하여야 할 것이다. 따라서 본 논문에서는 터널의 주변지반을 보강할 경우 터널주변지반의 복합거동에 대한 연구로써 간편 터널 지보/보강 설계법과 보강된 주변지반의 강도정수변화에 대하여 이론적 및 실험적으로 연구하였으며, 또한 터널주변 강도정수 변화 결과에 따른 복합항복함수에 대해서도 제시하였다. 연구결과, 록볼트의 경우에는 터널주변지반의 내부마찰각의 증가보다는 점착력의 증가에 많은 영향을 준다는 것을 알 수 있었다.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.11-18
• /
• 2012

This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.

• 한국경영과학회지
• /
• 제27권1호
• /
• pp.53-73
• /
• 2002

The launch of a new business is crucial to the future growth and profitability of a company. A new business project typically requires a large amount of resources while it has a high possibility of failure. The evaluation of new business opportunities is therefore quite a critical decision-making to companies. This evaluation includes screening of a large number of criteria at a time which often makes desision-making very complicated. Management should evaluate the business alternatives in a sound and consistent manner that is hard to achieve because the new business evaluation is a typical semi/unstructured decision-making problem. The difficulty in such an evaluation will increase if it is required for management to consider both quantitative and qualitative criteria simultaneously. Under these circumstances, this study has proposed a decision-making framework that utilizes analytical hierarchy process(AHP). This study has identified a set of criteria essential to the new business evaluation and suggested a systematic framework for it. Both qualitative and quantitative evaluations are incorporated into the single framework in this study.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.219-227
• /
• 2013

Mohr-Coulomb 파괴조건식은 암반구조물의 설계에 활발히 이용되고 있지만 암석의 비선형 강도특성과 중간주응력이 강도에 미치는 영향을 고려할 수 없다는 단점을 가지고 있다. 이러한 단점을 극복하기 위하여 Hoek-Brown 파괴조건식이 제안되었으며 최근 중간주응력의 영향을 고려할 수 있는 여러 3-D 파괴조건식들이 제안되고 있다. 그러나 아직까지도 많은 암반공학적 설계과정에서 Mohr-Coulomb 파괴조건식을 이용하여 암반의 파괴 가능성이 평가되고 있고 대부분의 현장 기술자들도 내부마찰각과 점착력으로 암반의 강도특성을 이해하는데 익숙하다. 그러므로 Mohr-Coulomb 파괴조건식에 비해 개선된 비선형 혹은 3-D 파괴조건식의 접선마찰각 및 접선점착력이 구해지면 기존의 Mohr-Coulomb 파괴조건식을 활용하는 틀 안에서 개선된 파괴조건식들의 장점을 이용하는 것이 가능하다. 본 연구에서는 접선마찰각과 접선점착력을 응력불변량으로 표시하는 방법을 제시하고 이를 일반화된 Hoek-Brown 파괴조건식과 Hoek-Brown 파괴조건식을 3-D로 확장시킨 HB-WW 파괴조건식에 적용하였다. 또한 파괴조건식의 중간주응력 의존성을 3차원 주응력 공간에서 기하학적으로 해석하는 새로운 접근법을 제안하였다. 제안된 방법의 실행 사례를 통해 HB-WW 파괴함수의 접선마찰각과 접선점착력은 2-D 파괴함수의 경우와 달리 중간주응력의 크기에 상당한 영향을 받음을 보였다.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.785-802
• /
• 2018

In this paper, two different computational methods, called Rayleigh-Ritz and collocation are developed to estimate the ultimate strength of composite plates. Progressive damage behavior of moderately thick composite laminated plates is studied under in-plane compressive load and uniform lateral pressure. The formulations of both methods are based on the concept of the principle of minimum potential energy. First order shear deformation theory and the assumption of large deflections are used to develop the equilibrium equations of laminated plates. Therefore, Newton-Raphson technique will be used to solve the obtained system of nonlinear algebraic equations. In Rayleigh-Ritz method, two degradation models called complete and region degradation models are used to estimate the degradation zone around the failure location. In the second method, a new energy based collocation technique is introduced in which the domain of the plate is discretized into the Legendre-Gauss-Lobatto points. In this new method, in addition to the two previous models, the new model named node degradation model will also be used in which the material properties of the area just around the failed node are reduced. To predict the failure location, Hashin failure criteria have been used and the corresponding material properties of the failed zone are reduced instantaneously. Approximation of the displacement fields is performed by suitable harmonic functions in the Rayleigh-Ritz method and by Legendre basis functions (LBFs) in the second method. Finally, the results will be calculated and discussions will be conducted on the methods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.339-344
• /
• 2001

The transmission pipeline industry spends many millions of dollars annually performing inline inspections, excavating sites of possible corrosion, and repairing or replacing damaged sections of pipe. New criteria for evaluation the integrity of corroded pipe have been developed in recent years to help in controlling these costs. These new criteria vary widely in their estimates of integrity and the most appropriate criterion for a given pipeline is not always clear. This paper presents an overview, comparison and evaluation of acceptability criteria for corrosion defects in pipelines. By full scale burst tests, this paper have assessed the relative accuracy of each of theses criteria in predicting failure and remaining strength. Many of the criteria appear to be excessively conservative and indicate that defects must be repaired when none is needed, based upon burst test data.