• The Plant Pathology Journal
• /
• v.32 no.2
• /
• pp.112-122
• /
• 2016

Virus-induced gene silencing (VIGS) is an effective tool for the study of soybean gene function. Successful VIGS depends on the interaction between virus spread and plant growth, which can be influenced by environmental conditions. Recently, we developed a new VIGS system derived from the Soybean yellow common mosaic virus (SYCMV). Here, we investigated several environmental and developmental factors to improve the efficiency of a SYCMV-based VIGS system to optimize the functional analysis of the soybean. Following SYCMV: Glycine max-phytoene desaturase (GmPDS) infiltration, we investigated the effect of photoperiod, inoculation time, concentration of Agrobacterium inoculm, and growth temperature on VIGS efficiency. In addition, the relative expression of GmPDS between non-silenced and silenced plants was measured by qRT-PCR. We found that gene silencing efficiency was highest at a photoperiod of 16/8 h (light/dark) at a growth temperature of approximately $27^{\circ}C$ following syringe infiltration to unrolled unifoliolate leaves in cotyledon stage with a final SYCMV:GmPDS optimal density $(OD)_{600}$ of 2.0. Using this optimized protocol, we achieved high efficiency of GmPDS-silencing in various soybean germplasms including cultivated and wild soybeans. We also confirmed that VIGS occurred in the entire plant, including the root, stem, leaves, and flowers, and could transmit GmPDS to other soybean germplasms via mechanical inoculation. This optimized protocol using a SYCMV-based VIGS system in the soybean should provide a fast and effective method to elucidate gene functions and for use in large-scale screening experiments.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.871-880
• /
• 1999

The effects of dry roasting (110, 130, $150^{\circ}C$ for 15, 30, 45 min) on potential ruminant protein nutritional values in terms of: a), rumen bypass protein (BCP); b), rumen bypass starch (BST); c), fermented organic matter (FOM); d), true absorbed bypass protein (ABCP); e) microbial protein synthesized in the rumen based on available energy (E_MP); f), microbial protein synthesized in the rumen based on available nitrogen (N_MP); g), true protein supplied to the small intestine (TPSI); h), true absorbed rumen synthesized microbial protein (AMP); i), endogenous protein losses (ENDP); j), true digested protein in the small intestine (DVE); k), degraded protein balance (OEB) of whole lupin seeds (WLS) and faba beans (WFB) were evaluated by the new Dutch DV/OEB protein evaluation system. Dry roasting significantly increased BCP, BST, TPSI, ABCP, DVE (p<0.001) and decreased FOM, E_MP, AMP, N_MP and OEB (p<0.001) with increasing temperatures and times except that when temperature was at $110^{\circ}C$. The values of BCP, BST, TPSI, ABCP and DVE at $150^{\circ}C/45min$ for WLS and WFB were increased 2.2, 3.7; -, 2.0; 1.7, 1.7; 2.3, 3.7 and 1.7, 1.7 times and the values of FOM, E_MP, AMP, N_MP and OEB at $150^{\circ}C/45min$ for WLS and WFB were decreased by 15.3, 25.8; 18.1, 25.8; 18.7, 25.8; 54.6, 41.6 and 82.3% 54.7%, respectively, over the raw WLS and WFB. The results indicated that though dry roasting reduced microbial protein synthesis due to reducing FOM, TPSI didn't decrease but highly increased due to increasing BCP more than enough for compensation of the microbial protein decreasing. Therefore the net absorbable DVE in the small intestine was highly increased. The OEB values were significantly reduced for both WLS and WFB but not to the level of negative. It indicated that microbial protein synthesis might not be impaired due to the sufficient N supplied in the rumen, but the high positive OEB values in the most treatments except of $150^{\circ}C$ for 30 and 45 min of WLS (The OEB values: 54.8 and 26.0 g/kg DM) indicated that there were the large amounts of N loss in the rumen. It was concluded that dry roasting at high temperature was effective in shifting protein degradation from rumen to intestines and it increased the DVE values without reaching the negative OEB values. No optimal treatment was found in WLS due to the too high OEB values in all treatments. But dry roasting at $150^{\circ}C$ for 30 and 45 min might be optimal treatments for WLS due to the very lower OEB values.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.204-208
• /
• 1991

Five models for net radiation estimation reported by Linacre(1968), Berljand(1956), Nakayama et al. (1983), Chang (1970) and Doorenbos et al. (1977) were tested for the adaptability to Korea. A new model with effective longwave radiation term parameterized by air temperature, solar radiation and vapor pressure was formulated and tested for its accuracy. Above five models with original parameter values showed large absolute mean deviations ranging from 0.86 to 1.64 MJ/$m^2$/day. The parameters of the above five models were reestimated by using net radiation and meteorological elements measured in Suwon, Korea. These five models with new parameter values showed absolute mean deviations ranging from 0.74 to 0.88 MJ/$m^2$/day. The following model was newly formulated: Rn=(1- $\alpha$) Rs- $\sigma$ $T_{k}$$^{4}$ (0.0103 Exp (0 .0731 Rs) -0.0475 (equation omitted) +0 .2478) ($R^2$=0.997, n=63) where $\alpha$ =albedo, $\sigma$=Stefan-Boltzmann constant, Rs=solar radiation in MJ/$m^2$/day, Tk =air temperature in Kelvin and $e_{a}$=vapor pressure in mb. This model revealed 0.4988 MJ/$m^2$/day in absolute mean deviation when applied to an independent set of meteorological data.a.a.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.2
• /
• pp.13-25
• /
• 2008

The purpose of this study was to investigate extract from mixed culture with Trichloloma matsutake mycelium in oriental medicine and cereal medium(OCM) to develop new material for pharmaceutical products and medicinal food for diabetes mellitus. To evaluate of hypoglycemic activity of OCM extracts, we examined the inhibitory activity of ${\alpha}$-glucosidasein OCM, blood glucose level and liver function of streptozotocin(STZ) induced diabetic rat. Experimental group was divided into 6 groups: first, it was divided into normal control group(hereafter NC group) and diabetes-induced group, and diabetes-induced group was subdivided into diabetic control group(DC group), treated by hot water extracts group(HE), ultra sonic waves, micro waves, and micro bubble extracts g roup(UE), crude polysaccharide of HE group (HEE) and crude polysaccharide of UE group(UEE) at a dose of 300mg/kg/body weight, respectively. In diabetic-induced groups, after streptozotocin was melted in 0.01M citrate buffer at 50mg/kg/body weight, when the non-fasting blood glucose levelwas 300 mg/dl or more in blood collected from the tail vein, it was regarded as diabetic induction and then such diabetic-induced experimental animals were used in this experiment. At the end of the experiment, blood glucose level increased by 4.19% in DC group but significantly decreased by 32.34%, 19.19%, 17.81% and 17.64%, respectively in UEEE, UE, HE, and HEE groups. In the cases of AST, ALT, and ALP, the experiment group treated with extracts showed significantly lowerblood glucose level than DC group. The levels of BUN and uric acid were found to be lower in the UMPM extract group(UE) than HW extract group(HE), which implies that herb medicine medium extracts in which Tricholoma matsutake mycelia were cultured are effective in reducing impaired liver function as well as high blood glucose level caused by diabetes. In addition, the administration of low temperature UMPM extracts was found to produce better results than that of high temperature hot water extracts. In this regard, it is expected that extracts from herb medicine obtained by cultivating Tricholoma matsutake mycelia will be widely used as new ingredients for foods and medicines for prevention and treatment of diabetes.

• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.31-36
• /
• 2007

Nanoimprint lithography (NIL) is a new lithographic method that offers a sub-10nm feature size, high throughput, and low cost. One of the most serious problems of NIL is the stiction between mold and resist. The antistiction layer coating is very effective to prevent this stiction and ensure the successful NIL results. In this paper, an antistiction layer was deposited by VSAM (vapor self assembly monolayer) method on silicon samples with FOTS (perfluoroctyltrichlorosilane) as a precursor for making an antistiction layer. A specially designed LPCVD (low pressure chemical vapor deposition) was used for this experiment. All experiments were achieved after removing the humidity. First, the evaporation test of FOTS was performed for checking the evaporation temperature at low pressure. FOTS was evaporated at 5 Tow and $110^{\circ}C$. In order to evaluate the temperature effect on antistiction layer, chamber temperature was changed from 50 to $170^{\circ}C$ with 0.1ml of FOTS for 1 minute. Good hydrophobicity of all samples was shown at about $110^{\circ}$ of contact angle and under $20^{\circ}$ of hysteresis. The surface energies of all samples calculated by Lewis acid/base theory was shown to be about 15mN/m. The deposited thicknesses of all samples measured by ellipsometry were almost 1nm that was similar value of the calculated molecular length. The surface roughness of all samples was not changed after deposition but the friction force showed relatively high values and deviations deposited at under $110^{\circ}$. Also the white circles were founded in LFM images under $110^{\circ}$. High friction forces were guessed based on this irregular deposition. The optimized VSAM process for FOTS was achieved at $170^{\circ}C$, 5 Torr for 1 hour. The hot embossing process with 4 inch Si mold was successfully achieved after VSAM deposition.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.49-59
• /
• 2004

Organic smectite was hydrothermally synthesized by treating the opal-rich siliceous mudstone from the Pohang area with TMAOH solutions and 1:1 solutions of TMAOH+NaOH at $80^{\circ}C$ and concentrations ranging 10∼15%. Smectite was solely formed without accompanying any mineral products in case of TMAOH, whereas NaP and hydroxysodalite was synthesized together with smectite under the blending solution of TMAOH+NaOH. The synthesized smectite is identified as an organic smectite intercalating $TMA^{+}$ within its interlayer site, specifically corresponding to monmorillonite species, through mineralogical characterization by XRD, DTA, and IR analyses. The experimental results indicate that main precursor of the synthesized smectite is undoubtedly opal-CT, and the original sedimentary smectite included as considerable amounts in the mudstone seems to play a major role as Al-sources necessary far the smectite formation. Original inert components such as quartz and mica do not affect mostly to the synthesis reaction, and thus, are resultantly found as impurities in the synthetic products. These experimental results may imply that a new effective method for the low-temperature (less than $100^{\circ}C$) hydrothermal synthesis of organic smectite will be established if some Al-sources adequate for this synthetic system are available.

• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.37-42
• /
• 2004

To differentiate commercial bifidobacteia for Bifidobacterium lactis Bb-12, Bif. longum Bb-536 and Bif. infantis Maeil-K9, we studied the various carbon source, the nitrogen sources and antibiotics. Amygdalin and fructose were good candidates for carbon sources, and tryptone was suitable for nitrogen sources to design a new selective media for three commercial bifidobacteria. In the case of the amygdalin-containing medium as carbon sources, Bif. lactis Bb-12 and Bif. infantis Maeil-K9 showed good growth, and in fructose-containing medium, Bif. longum Bb-536 showed good growth. In antibiotics resistance study, the addition of 1 mg/L doxycyclin was very effective for differentiation of each bifidobacteria. Doxycyclin did not affect the growth of Bif. lactis Bb-12 and Bif. infantis Maeil-K9, but Bif. longum Bb-536 was completely inhibited by doxycyclin. Finally to confirm the selection capability of newly designed selective media, temperature-shocked bifidobacteria were cultured on them. As the results, fructose or doxycyclin containing medium showed for high growth for temperature-shocked bifidobacteria, but amygdalin containing medium showed low growth of temperature-shocked bifidobacteria.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.79-87
• /
• 2014

In order to foster rapid disaster response and public life protection, National Emergency Management Agency has been trying to spread 'Emergency Rescue Standard System' on a national scale since 2006. The agency has also intensified management of firefighter's safety on disaster site by implementing danger predication training, specialized training and education and safety procedure check as a part of safety management officer duties. Nevertheless, there are limitations for effective fire fighting steps, such as damage spreading and life damage due to unawareness of illegal converted structure, structure transformation by high temperature and nearby hazardous material storage as well as extemporary situation handling endangered firefighter's life. In order to eliminate these limitations there is a need for an effort and technology application to minimize human errors such as inaccurate situational awareness, wrong decision built on experience and judgment of field commander and firefighters. The purpose of this study is to propose a new disaster response model which is applied with geospatial information. we executed spatial contextual awareness map analysis using fire-fighting vulnerable zone model to propose the new disaster response model and also examined a case study for Dalseo-gu in Daegu Metropolitan City. Finally, we also suggested operational concept of new proposed model on a national scale.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.533-540
• /
• 2006

In this study, the possibility of green tea waste (GTW) as a new ingredient of byproducts-mixed silage was investigated. Characteristics of GTW were low in dry matter (DM) content (20%), and high in crude protein (30 to 36%) and tannins (8.5%). The GTW was added to mixed silages composed of tofu cake, rice straw and rice bran that are locally available in Japan. In experiment 1, the effect of GTW addition to silage made from various patterns of byproducts mixture based on tofu cake was studied. In experiment 2, the effect of GTW addition and storage temperature on fermentation characteristics, nutrient contents and in vitro ruminal gas production of byproducts-mixed silages were examined. In experiment 1, GTW addition on tofu cake accelerated acetic, propionic and butyric acid accumulation in the silage. When rice straw was mixed with tofu cake, DM content was increased from 47 to 56%, lactic acid was the main acid and the pH was decreased below 4.2. In this case, GTW addition to those mixtures did not affect acid concentrations of the silage. In experiment 2, GTW addition to the byproducts mixture increased lactic acid concentration, decreased the pH and DM loss of the silages. In GTW treatments, tannin concentration was lower in the silage stored at $30^{\circ}C$ than $15^{\circ}C$. Addition of GTW into the silage also increased in vitro ruminal gas production. It was concluded that addition of GTW into byproducts-mixed silage enhanced lactic acid fermentation when there were insufficient materials for lactic acid production. Utilization of GTW as an ingredient in mixed silages would be effective in enhancing fermentation characteristics, lowering tannin content and in vitro ruminal gas production.