• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.583-586
• /
• 2009

"Hyehwa" an Asiatic lily cultivar was released in 1998 at National Institute of Horticultural and Herbal Science (RDA), Suwon, Korea. The cross was made in 1991 between Asiatic lily "White Bird", a white colored, and "Avignon", an unspotted scarlet red colored. It was preliminarily selected as A93-20 in 1993. Its multiplication, bulbing growth and flowering characteristic tests were conducted from 1994 to 1998. A new cultivar "Hyehwa" flowers in middle of June and grows 98.7 cm in height. Flowers bloom upward-facing, thick orange (RHS, 28A). Year-round flowering is possible by storage of the bulb under $-1.5^{\circ}C$ conditions. For forcing culture, it is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. Botrytis disease control is needed in the wet season.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.680-685
• /
• 1998

Prestressed concrete I-girders were used in the bridge applications in the early 1950s. During the last four decades, the most widely used girder length of bridges have been below 30meters. The main objective of this study is to develope the alternative section for long span bridge which exceed 40 meters. The developed Bulb-Tee girder has a wide bottom flange to enhance the compressive strength and to allow placement of a large number of strands in the bottom flange. New bulb-tee shaped PSC girder sections are proposed in this paper. Splicing the technique for long span bridge girder to reduce the self weight is also proposed.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.734-741
• /
• 2016

Lily (Lilium davidii) is a high-yielding flowering plant. Besides roses and chrysanthemums, lily bulbs have long been used as food and in oriental medicine. However, the usage and value of cut lily bulbs has not been recognized. A bulb whose yield has been decreased is called a waste bulb, and a large amount of such bulbs is discarded every year. In this study, the functionality of waste bulbs from cut lilies was investigated to explore their potential use as a value-added product. We divided lily bulbs into two groups, one group with six varieties of new bulbs (Medusa, Siberia, Woori Tower, Yelloween, Le Reve, and Morning Star) used for cultivation and the other group with six varieties of waste bulbs (Medusa, Siberia, Woori Tower, Yelloween, Sorbonne, and Sheila). Physiological activities (${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl: DPPH) and 3-ethlbenzthiazolne-6-sulfonic acid (ABTS) radical scavenging capability and tyrosinase inhibiting activity), the amount of total as well as eight individual phenolic compounds (chlorogenic acid, epicatechin, rutin hydrate, p-coumaric acid, kaempferol 3-O-${\beta}$-rutinoside, phloridzin dihydrate, myricetin, and quercetin), and total flavonoid content were measured in the bulbs by high performance liquid chromatography. We detected high amounts of total phenol and total flavonoid as well as high DPPH and ABTS radical scavenging ability. More tyrosinase inhibiting activity was detected in the new bulbs than in the waste bulbs. However, both the new and waste bulbs showed a higher inhibitory activity than the standard (100 ppm ascorbic acid). Although the content of phenolic compounds differed among varieties, under the conditions of the experiment, the most abundant phenolics were epicatechins, followed by chlorogenic acid, and rutins. Overall, the waste bulbs had a higher content of these compounds than the new bulbs. Based on these results, we concluded that bulbs from cut lilies could be used as functional foods in the future and farmers could expect economic gain from the hitherto neglected waste bulbs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.985-986
• /
• 2012

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5859-5864
• /
• 2015

The purpose of this study is to analyze the outcomes of experts' survey for Cultivation techniques of good seed bulb in garlics program, purpose of introduction, and performance analysis this program. As a result of survey on new technology adoption to be cultivated in cultivation techniques of good seed bulb in garlics, technique satisfaction scored the highest with 4.3 points whereas innovation scored 4.21 points. On the other hand, risk scored the lowest with 2.53 points. Also, using BMO model business attractiveness and business fit scored 44 points, 45points respectively. Thus, the project rate of success were analyzed by more than 80 per cent. Finally, the management performance is analyzed on the garlic farms by selecting the highest awareness collected. As a result of effects after new technology adoption, 43% of the surveyees stated that the relative management costs dramatically decreased, and increase in production.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.160-167
• /
• 2011

Shallot is a foreign crop introduced from France in 1995 as a new overwintering field crop with an aim to develop as an export crop. During the introductory cultivation trials, several problems were raised such as premature growth depression in early summer, sensitivity to summer moisture, and weakened vigor of the seed bulbs following successive propagations. This study was conducted to develop proper cultural methods based on annual productivity and adaptability of growing area to address and suggest solutions to some of these problems. Bulb weight was 18.7 g and bulb yield per 10a was 4,113 kg in 1995. In 1996, bulb weight increased to 25.8 g, while bulbs yield per 10a deceased to 2,013 kg. This trend continued in 1997 so that bulb weight increased, and yield per 10a decreased as compared to those in 1996. However, in 1998, both bulb weight (21.1 kg) and yield per 10a (1,246 kg) decreased significantly as compared to those of the previous years. Plant growth from planting to April in the coastal area was better than in other areas. However, the plant growth thereafter until early July was better in the semi-highland area. As a result, the bulb yield in the semi-highland area was 57% more than that in the lowland areas such as the coastal area.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.88-92
• /
• 2006

Nerine was originated from South Africa and around 30 kinds of species are distributed in worldwide. In present study we have characterized the division methods and growing conditions for the bulb propagation of Nerine. Result indicated that new bulb formation, and growth of N. bowdenii cultivars was better after dormancy stage compared to post-harvest and dormancy stages, under twin-scale method at $20^{\circ}C$ Similarly, new bulb tissue density was higher at $20^{\circ}C$ compared to other temperatures. Moreover, N. bowdenii 'Favourite' exhibited better growth than N. bowdenii 'Stepanii' and vermiculite was found to be most suitable growing medium for Nerine bulb propagation.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.25-37
• /
• 2022

In this paper, a small-scale model testing system was developed using a series of small-scale model tests to analyze the mechanism of compaction pile formation and evaluate the quality of controlled grading aggregates proposed as an alternative material to the sand compaction pile (SCP) method and granular compaction pile (GCP). These are the most typical ground improvement methods in field practice, particularly for soft grounds. However, the SCP has faced difficulties due to the supply shortage of natural sand and the corresponding price surge of sand. The GCP is limited in marine soft grounds because of the failure occurring at the pile tip caused by excessive expansion of the deeper bulbs, leading to uneven bulb formation. The uniformity of compacted pile bulbs is critical to ensuring the bearing capacity and quality of the compaction pile. This study aims to evaluate the performance of the new material and controlled grading aggregates using small-scale model tests simulating field compaction process to investigate its potential application in comparison with SCP. The compaction piles are examined in four cases according to different materials used for compaction pile and clay strength. The compaction pile materials, which are made of sand and controlled grading aggregates, used in this study were compared to reveal the mechanism of the bulb creation. The experimental data confirm that the bulb formation quality of the traditional sand and the new material, controlled grading aggregates are comparable. The compaction pile made of controlled grading aggregates presents higher bearing capacity than that of marine sand.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.61-67
• /
• 2014

Small punch(SP) tests were performed on high strength Dual Phase(DP) steels in order to evaluate the behavior of hydrogen embrittlement. For this purpose, three different kinds of DP steel specimens were charged with hydrogen by electochemical hydrogen charging experiment. After charging with hydrogen, the amount of charged hydrogen was measured. The measurement results showed that amounts of charged hydrogen were largely dependent on the martensite volume fraction of DP steel. The hydrogen charging time of 25 hrs with current densities of 150 and $200mA/cm^2$ was investigated as saturation condition with hydrogen. The analysis results on the SP energy and height of SP bulbs after SP tests showed that those were decreased as the amount of charged hydrogen increased. Fractographs of SP bulbs were observed a brittle fracture mixed with quasi-cleavage fractures, layered structures and clear facets.

• 연구논문집
• /
• s.33
• /
• pp.89-97
• /
• 2003

A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then detemines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower. Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents shape design of the barrel cam in order to prove the accuracy of the proposed methods