• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.571-597
• /
• 2016

A new unified design formula for calculating the composite compressive strength of the axially loaded circular concrete filled double steel tubular (CFDST) short and slender columns is presented in this paper. The formula is obtained from the analytic solution by using the limit equilibrium theory, the cylinder theory and the "Unified theory" under axial compression. Furthermore, the stability factor of CFDST slender columns is derived on the basis of the Perry-Robertson formula. This paper also reports the results of experiments and finite element analysis carried out on concrete filled double steel tubular columns, where the tested specimens include short and slender columns with different steel ratio and yield strength of inner tube; a new constitutive model for the concrete confined by both the outer and inner steel tube is proposed and incorporated in the finite element model developed. The comparisons among the finite element results, experimental results, and theoretical predictions show a good agreement in predicting the behavior and strength of the concrete filled steel tubular (CFST) columns with or without inner steel tubes. An important characteristic of the new formulas is that they provide a unified formulation for both the plain CFST and CFDST columns relating to the compressive strength or the stability bearing capacity and a set of design parameters.

• 소성∙가공
• /
• 제8권4호
• /
• pp.374-383
• /
• 1999

To determine the flow stress of semi-solid materials, a new combined method has been studied by experimental and analytic technique in the current approach. Using backward extrusion experiment and its numerical analysis, the characterization scheme of semi-solid materials according to the change of initial solid volume fraction has been proposed. Because that solid volume fraction is sensitive to temperature change, it is required to precisely control the temperature setting. Model materials can guarantee the establishment of material characterization technique from the noise due to temperature change. Thus, clay mixed with bonded abrasives was used for experiment and the change of initial solid fraction was copied out through the variation of mixing ratio. Upper bound method was adapted to increase in efficiency of the calculation in numerical analysis and new kinematically admissible velocity field was employed to improve the accuracy of numerical solution. It is thought that the material characterization scheme proposed in this study can be applied to not only semi-solid materials, but also other materials that is difficult to obtain the simple stress state.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.94-101
• /
• 2016

This paper shows a new magnetic field analysis of an interior permanent magnet (IPM) machines with an axial overhang structure wherein the rotor axial length exceeds that of the stator. The rotor overhang used to increase torque density of the radial flux machine is difficult to analyze because of extra consideration of axial direction, and thus it is general for machine designer to take 3-D finite element analysis (FEA) capable of considering both radial and axial complicated geometry in the machine. However, it requires too much computing time for preliminary design especially for optimization process. Therefore, in this paper a 2-D analytic method using a lumped magnetic circuit model (LMCM) is proposed to overcome the problem. For the analysis of overhang effect, the magnetic circuit is separated and solved from overhang and non-overhang regions respectively. For the validation of proposed concept, 3-D finite element analysis (FEA) is performed. From the analysis results, it is shown that our new proposed method presents good performance in terms of calculating electromotive force (EMF) and torque within a short time. Therefore, the proposed model can be useful in design of IPM with an overhang structure.

• 한국항만경제학회지
• /
• 제31권4호
• /
• pp.121-132
• /
• 2015

양산 ICD(Inland Container Depot)는 2000년 3월 개장 이후 2005년 133만 TEU를 처리하여 국제물류경쟁력과 부산지역의 컨테이너화물 운송 경쟁력을 높여 부산항 및 우리나라 항만물류산업에서 중요한 역할을 담당하였다. 그러나 2006년 부산항 신항 개장과 신항배후부지의 조성에서 물동량이 급감하여 활성화를 위한 새로운 방안이 모색이 필요한 상황이다. 따라서 본 연구는 AHP(analytic hierarchy process)를 활용하여 평가모형을 설정하고, 양산 ICD 내 입주기업 및 관계자를 대상으로 설문조사를 실시하여 양산 ICD의 활성화 방안을 모색하였다. 연구의 결과, 양산 ICD 활성화 방안으로 입지와 시설의 장점을 고려한 물류시설(공동집배송센터, 물류창고)로의 기능전환이 필요하며, 이용기간 연장, 건폐율 확보를 통해 기존 및 신규 기업활동의 안정성을 보장하여야 할 것이다. 또한 ICD 내 철도역 등 시설을 활용하여 적극적인 철도활성화 정책을 통해 철도택배 등을 활용하여 신규 물동량을 창출하고, 공로 중심의 국가물류체계에서 철송 활성화를 통한 내륙물류기지로서의 그 역할을 제시하였다.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.145-152
• /
• 2008

지진해일의 초기 파장은 수십에서 수백 킬로미터에 이른다. 따라서 보다 정확한 지진해일 전파 수치모의를 위해 파장의 크기에 따라 중요성이 변하는 분산효과를 고려하여야 한다. 최근에 분산효과를 고려할 수 있는 실용적인 분산보정기법이 개발되었다(Cho 등, 2007). 분산보정기법은 일정 수심에서 해석해와 비교함으로서 검증되었다. 하지만 아직 수심이 변화하는 실제지형에 적용이 되지 않았다. 본 연구에서는 개발된 모형의 실제 지형에서의 적용성을 검토하였다. 모형의 적용성 검토를 위해 역사 지진해일인 1983 동해 중부 지진해일과 1993 북해도 남서 외해 지진해일을 재현하였다. 대상 지역은 당시 검조기록이 존재하는 속초, 묵호, 포항항이고 지진해일 첫 파 도착시간과 검조소 위치에서의 최대 파고를 비교함으로서 적용성을 검토하였다.

• 한국수자원학회논문집
• /
• 제36권2호
• /
• pp.223-235
• /
• 2003

Clark 모형의 매개변수 추정방법을 개선하기 위하여, 순간단위도를 gamma 분포형 함수로 가정하여 매개변수를 추정한 후 이를 Clark 모형의 매개변수로 전환하는 간접 추정방법을 제안하였다. 이 방법은 전통적인 Clark 모형의 매개변수 추정방법의 개연적인 부정확성을 개선하는 특징과 더불어 Nash 모형과의 상관성을 파악할 수 있는 장점을 갖고 있다. 제안된 매개변수 추정방법을 위천 유역에 적용한 결과 만족할 수 있는 수준의 추정값을 얻을 수 있었으며 또한 유역의 도달시간-유하면적 관계를 나타내는 합성함수를 구축할 수 있었다. 또한 제안된 매개변수 추정방법은 미계측 유역에 대한 추정에 있어서도 높은 적용성을 보였다. 따라서 제안된 방법론은 기존의 매개변수 추정방법을 보조할 수 있는 충분한 대안으로 판단된다.

• 품질경영학회지
• /
• 제42권2호
• /
• pp.131-143
• /
• 2014

Purpose: This paper discusses the intrinsic assumption of one-dimensional relationship between the upper and lower levels in AHP(Analytic Hierarchy Process) for the Preliminary Feasibility Study of National R&D Program. This assumptions has not been questioned in academia and industry so far. Methods: This discussion is induced by understanding the Theory of Attractive Quality (Kano et al. 1984) and explains the limitation of AHP in the preliminary feasibility study of national R&D program. Results: In this paper, we propose a new questioning method based on two dimensional perspective, which is named as 2D-AHP (two dimensional AHP), to overcome the limitation. The main idea stems from the observation that the relationship between the upper and lower levels in AHP can vary depending on the subject of R&D. Conclusion: The two dimensional perspective pointed out in this paper should be more deeply studied in the field of MCDM(multi-criteria decision making) since it can be applied to the more general problems in human decision making.

• 경영과학
• /
• 제11권3호
• /
• pp.129-151
• /
• 1994

This paper focuses on method of setting priorities for telecommunications Standardization in which usually includes prioritization, resource allocation, standardization schedule for each SWA is based on prioritization of SWAs. We mainly used the Analytic Hierarchy Process(AHP) and a modified Delphi technique as a method for planning process. Recently, rapid technology evolution in telecommunications fields increases the necessity of developing more and more new standards. Also increased complexity of technologies makes standards more complicated, more specified and more thick than the past ones. As a result, the number of SWAa(Standardization Work Areas) and SWIs(Standardization Work Iterms) is being increased continuously. Furthermore, rapid telecommunication environment changes such as deregulation, liberalization, privatization, regionalization, and globalization surrounding telecommunications standardization grows increasingly important. To cope with these challenges and to make the more efficient use of the limited standardization resources, i.e., time, financial, personal resources, we will suggest logical and rational approach that is a backbone of strategic plan for telecommunication standardization. The telecommunication standardization planning process involves a MCDM(Multi-Criteria Decision Making) process. The Analytic Hierarchy Process(AHP) is a kind of MCDM approach. Our method is based on a combination of a modified Delphi technique and an application of AHP(spreadsheet model). Analyzed data from Delphi technique is used as inputs to AHP. In addition we also focus on the technique how to combine group judgments and to handle a large number of comparisons.

• 한국빅데이터학회지
• /
• 제1권1호
• /
• pp.23-32
• /
• 2016

정보기술 발전은 기업이 보유하고 있는 다양한 구조 및 비구조 데이터를 관리할 수 있게 하였다. 이러한 빅데이터 활용은 기업의 새로운 비즈니스 핵심가치로 평가 받고 있다. 본 연구에서는 빅데이터로 인해 더욱 중요하게 평가받는 데이터 자원이 기업 분석 활용에 미치는 영향을 연구하고자 한다. 최신 해외 보고서들을 살펴보면, 빅데이터 활용성과에 대한 실증 연구를 보여주고 있다. 이러한 해외 실증 연구와 비교하여 국내 기업의 빅데이터 활용 특성을 분석하고자 한다. 본 연구 결과는 향후 빅데이터 활용 기업에 적용 가능한 성숙모형 개발에 도움을 줄 수 있을 것이다.

• Journal of applied mathematics & informatics
• /
• 제39권5_6호
• /
• pp.601-616
• /
• 2021

Retrial queueing models have been studied extensively in the literature. These have many practical applications, especially in service sectors. However, retrial queueing models have their own limitations. Typically, analyzing such models involve level-dependent quasi-birth-and-death processes, and hence some form of a truncation or an approximate method or simulation approach is needed to study in steady-state. Secondly, in general, the customers are not served on a first-come-first-served basis. The latter is the case when a new arrival may find a free server while prior arrivals are waiting in the retrial orbit due to the servers being busy during their arrivals. In this paper, we take a different approach to the study of multi-server retrial queues in which the signals are generated in such a way to provide a reasonably fair treatment to all the customers seeking service. Further, this approach makes the study to be level-independent quasi-birth-and-death process. This approach is different from any considered in the literature. Using matrix-analytic methods we analyze MAP/M/c-type retrial queueing models along with Poisson signals in steady-state. Illustrative numerical examples including a comparison with previously published retrial queues are presented and they show marked improvements in providing a quality of service to the customers.