• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.246-260
• /
• 2014

A 90-m horizontal-resolution numerical model was configured to study the micrometeorological features of local winds in the valley of Gwangneung KoFlux (Korea Flux network) Sites (GDK: Gwangneung Deciduous forest site in Korea, GCK: Gwangneung Coniferous forest site in Korea) during summer days. The U. S. Geological Survey (USGS) Shuttle Radar Topography Mission (SRTM) data were employed for high-resolution model terrain height. Model performance was evaluated by comparing observed and simulated near-surface temperature and winds. Detailed qualitative analysis of the model-simulated wind field was carried out for two selected cases which are a clear day (Case I) and a cloudy day (Case II). Observed winds exhibited that GDK and GCK, as well as Case I and Case II, had differences in timing, duration and strength of daytime and nighttime wind direction and speeds. The model simulation results strongly supported the existence of the drainage flow in the valley of the KoFlux tower sites. Overall, the simulated model fields realistically presented the diurnal cycle of local winds in and around the valley, including the morning drainage-upslope transition and the evening reversal of upslope wind. Also, they indicated the complexity of local winds interactions by presenting that daytime westerly winds in the valley were not always pure mountain winds and were often coupled with larger-scale wind systems, such as synoptic-scale winds or mesoscale sea breezes blowing from the west coast of the peninsula.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2008

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio. Internal humidity change and shrinkage strain were about 10%, 4% and $320\times10^{-6}$, $120\times10^{-6}$ respectively on concrete with water binder ratio 0.3, 0.4 and from the results, humidity change and shrinkage represented the strong linear relation regardless of mixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20 nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.215-221
• /
• 2006

This paper is concerned with the control of multiple nonlinearities included in a humanoid robot system. A humanoid robot has some problems such as the structural instability, which leads to consider the control of multiple nonlinearities caused by driver parts as well as gear reducer. Saturation and backlash are typical examples of nonlinearities in the system. The conventional algorithms of backlash control were fuzzy algorithm, disturbance observer and neural network, etc. However, it is not easy to control the system by employing only single algorithm since the system usually includes multiple nonlinearities. In this paper, a switching Pill is considered for a control of saturation and a dual feedback algorithm is proposed for a backlash control. To implement the above algorithms, the system identification is firstly performed for the minimization of the difference between the results of simulation and experiment, and then the switching Pill gains are determined using genetic algorithm with some heuristic approach. The performance of the switching Pill controller for saturation and the dual feedback for backlash control is investigated through the simulation. Finally, it is shown that the implemented control system has good results and can be applied to the real humanoid robot system ISHURO.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.90-94
• /
• 2007

Location tracking automation of resources in construction industry is one of the most important procedures to improve construction project performance and reduce the period of construction. Recently, location tracking technologies have proven to be effective in tracking construction materials and equipment in real time through the instrumentality of RFID (Radio Frequency Identification). By using wireless communication and inter-working system between RFID and USN, it is possible that construction engineers receive the location information of construction resources without additional efforts that move the RFID reader to read tags periodically. In the inter-working system, RFID reader delivers the acquired materials information to sensor node which is connected by serial interface. Then sensor node transmits the received data to the data aggregation terminal that is a sink node. The data aggregation terminal can transmit collected data to construction manager who is out of construction site using infrastructure such as CDMA(Code Division Multiple Access) network. The combination model of the two system and field test scenarios are presented in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.578-585
• /
• 2012

Location tracking system through GPS and Wi-Fi is available at no additional cost in an environment of IEEE 802.11-based wireless network. It is useful for many applications in outdoor environment. However, a previous systems used for general device to tag. It is unsuitable for power aware location tracking system because general devices is more expensive and non-optimized for tracking. The hand-off method of IEEE 802.11 standard is not enough considering power consumption. This thesis analyzes the previous location tracking systems and proposes power aware system. First, we designed and implemented tag to optimize location tracking. Next, we propose low-power hand-off method and low-power behavior model in implemented tag. The proposed hand-off method resolve power problem by using the location information and behavior model minimize power consumption of tag through power-saving mode and the concept of duty cycle. To evaluating proposed methods and system performance, we perform simulations and experiments in real environment. And then, we calculate tag's power consumption based on the actual measured current consumption of each operation. In a simulation result, the proposed behavior model and hand-off method reduced about 98%, 59% than the standard's hand-off and default behavior model.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.523-532
• /
• 2003

Video on Demand(VOD) services cause high resource consumption in a video seuer, because multimedia are characterized by continuous playback, a high bandwidth requirement, and long playback duration. Patching has been proposed to save the network I/O bandwidth of a video server. To achieve true VOD, patching uses multicasting to share video streams, thereby providing immediate VOD services to users without any service latency. A communication channel is used to either multicast the entire video as a regular channel or multicast only the leading portion of a video as a Patching channel. This paper Proposes a buffering patching technique that divides regular channels, as used in patching, into sub-regular channels and regular channels to shorten the holding time of the channels. In the proposed technique, the last portion of video data, corresponding to the size of the buffering window, is not transferred by sub-regular channels, but rather downloaded and buffered in the user buffer from the latest regular channel. When simulations were performed to compare the performance of the proposed technique with that of conventional patching, the results indicated that the proposed technique was superior in terms of the defection rate, average service latency, and fairness, although the amount of video data buffered at each user station was higher than that with patching.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.730-737
• /
• 2003

In this paper, we present an efficient authentication proxy for IEEE 802.1x systems based on the port-based access control mechanism. An IEEE 802.1x system consists of PC supplicants, a bridge with authentication client functions, and an authentication server. For the network security and user authentication purposes, a supplicant who wants to access Internet should be authorized to access the bridge port using the Extended Authentication Protocol (EAP) over LAN. The frame of EAP over LAN is then relayed to the authentication server by the bridge. After several transactions between the supplicant and the server via the bridge, the supplicant may be either authorized or not. Noting that the transactions between the relaying bridge and the server will be increased as the number of supplicants grows in public networks, we propose a scheme for reducing the transactions by employing an authentication proxy function at the bridge. The proxy is allowed to cache the supplicant's user ID and password during his first transaction with the server. For the next authentication procedure of the same supplicant, the proxy function of the bridge handles the authentication transactions using its cache on behalf of the authentication server. Since the main authentication server handles only the first authentication transaction of each supplicant, the processing load of the server can be reduced. Also, the authentication transaction delay experienced by a supplicant can be decreased compared with the conventional 802.1x system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1206-1218
• /
• 1992

Token ring systems which control to switch the data stream of networks by passing the token have been widely used to medium access controls in many ring or bus topology LANs. The system could be modeled for analysis as single-server-multi-queue system of the cyclic service method. These concepts could be expanded to multi-token ring systems interconnected with single ring consisting of bridges implemented simply to be stored and transmitted. In the proposal for the performance analysis of the interconnected token ring system, in has been assumed M/G/1 queueing model that frame arrivals are the Poisson process at each station queue and frame sizes are independently and identically distributed. And the average time delays were analyzed mathematically for arbitrary frame transferred from source station to destination area. The time delay of the frame transmission could be explained as the sum of the average time which the token passed from arbitrary position to source station, such as the waiting time in the source station transferring the previous arrival frames, and the propagation time from source station to interdestinated point. These delays were given as the sum of the duration from inner and outer bridge queues, the time delays from inner and outer bridge queues, and the time from outer bridge queue to destination station. These results were investigated by varing parameters effected to total time delays. In the results, those factors to be effected to dominant the total time delays were increased were in the cases of the high arrival rates and the high ration of destination of the other outerring. The system were shown the time delays increased exponentially in spite of the priority service policy. In order to decreasing the number of outerrings and increasing the number of nodes in backbone relatively, so the systems could be decreased the total delay in the interconnected token ring system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.379-387
• /
• 2016

The goal of this research is to identify the planning techniques of high-rise housing estates applying a smart green city concept in order to understand the necessity of integrating 'planning & building' planning techniques and 'smart system' planning techniques and to analyze the current status of application. For the research, firstl, the definition of smart green city was established and high-rise housing estates planning was categorized according to a three space hierarchy, seven planning directions and 17 major features through literature review. Second, 28 'planning & building' planning techniques and 'smart system' planning techniques were derived through literature review and FGI analysis. Last, four cases in Multi-functional Administrative City were analyzed for the current status of application of planning techniques. In conclusion, planning techniques in 'Transportation Network', 'Environment-friendly layout planning of housing', 'Revitalization of green transportation', 'Utilization of new & renewable energy', 'Crime prevention and accident reduction', 'Use of high performance, and efficiency facility' main feature were identified as important planning techniques for Smart Green City and its implications were estimated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.514-520
• /
• 2018

Presence service provides various information about users such as locations, status of on/offline and network access methods, and number of presence resources required by each users increases largely in mobile environment. Therefore an effective method which can reduce load of presence servers is needed. In this paper, a large scale distributed presence service system which can distribute effectively total presence system load of presence servers using message control session has been presented. This large scale distributed presence service system provides various presence information for massive volumes of users. In this study, a new message control session architecture which can dynamically distribute loads of the presence servers to multiple servers has been presented, and a new presence information data architecture for controlling load of the presence servers has been designed. In this architecture, each presence server can exchange current load level in real time to get variance of the total system load change according to user numbers, and can distribute system load to maintain load level of each server evenly. The performance of the proposed large scale distributed presence service system has been analysed by experiments. The results has been showed that average presence resource subscription processing time reduced from 42.6% to 73.6%, and average presence notification processing time reduced from 37.6% to 64.8%.