• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.68-71
• /
• 2009

All-IP network requires change of the existing IP network engineering methods as the convergence service market between communication and broadcasting industries using IP network is growing rapidly. Especially the video services like IPTV require more strict transmission quality and higher bandwidth than the existing data services. So it is difficult to design All-IP network by the over-provisioning method which used to be used for the existing IP network design. It also requires a heavy investment which becomes one of big obstacles to the IPTV service expansion. In order to reduce the investment costs, it is required to design an optimized network by maximizing the utilization of the network resources and at the same time maintaining the customer satisfaction in terms of service quality. In this paper, we first analyze the effects of IPTV traffic on the existing internet. Then we compare two traffic engineering technologies, which are dimensioning without admission control and dimensioning with admission control, on the All-IP network design by simulation. Finally, we suggest cost effectiveness of traffic engineering technologies for designing the All-IP network.

• International Journal of Contents
• /
• 제5권2호
• /
• pp.43-52
• /
• 2009

The article first presents a broad overview of the design and management for survivable network. We review the concept of network survivability, various protection and restoration schemes. Also we introduce design architectures of Quantitative model and a Survivable Ad hoc and Mesh Network Architecture. In the other side of study like these(traditional engineering approach), there is the concept of the survivable network systems based on an immune approach. There is one sample of the dynamic multi-routing algorithms in this paper.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.447-460
• /
• 1996

Network optimization and design procedures often separate quality of service (QOS) performance measures from reliability issues. This paper considers channel allocation and flow assignment (routing) in a network subject to link failures. Fault-tolerant channel allocation and flow assingments are determined which minimize network cost while maintaining QOS performance requirements. this approach is shown to yield significant network cost reductions compared to previous heuristic methods used in the design of packet switched network with unreliable links.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.271-274
• /
• 1997

This paper presents the optimization technique for design of a CMAC network by using an evolution strategies(ES). The proposed technique is designed to find the optimal parameters of a CMAC network, which can minimize the learning error between the desired output and the CMAC network's as well as the number of memory used in the CMAC network. Computer simulations demonstrate the effectiveness of the proposed design method.

• 디자인학연구
• /
• 제15권1호
• /
• pp.81-92
• /
• 2002

Through network draft, it′s possible to describe curve draft with main motive in a lobby loom and to fulfill draft design more conveniently thanks to the development of computer device. Network draft was introduced by Alice Schlein, who is an American weaving artist, and I had ever published research paper on "The unfolding and development of network draft using computer dobby system" . The purpose of the next study was to develop the design of network draft while do make a design network draft in a dobby loom with 16 shafts, and could reach follow conclusion as a result of designing a variety of drafts. The initial of 4-end in a loom with 16 shafts was a basic condition to describe more perfect shape in comparison with draft in 8 shafts through the development of network. The development of draft line was essential to deride the pattern of fabric, and the pattern of draft is decided according to selecting key peg plan. Thereby, could get a variety of draft patterns derive from mix key peg plan with initial selected by developing the kind of draft line and applying diverse key peg plan. As for the variation and diversification of draft line, the shape of patters varied depending col the curve extent and connectivity of draft line and the size of curve. The pattern of network draft can be changed infinitely by free round curve of draft line. In addition, a variety of draft designs shall be developed by increasing the number of shaft, enlarging the scale of draft line, and developing more creative draft line.

• 한국측량학회지
• /
• 제28권6호
• /
• pp.587-594
• /
• 2010

측지망은 측량작업과 조정계산의 기준으로써 그 구성이 측량성과의 품질에 많은 영향을 미침에도 불구하고 대부분의 측지망 설계는 경험적 또는 단순한 기하학적 강도만을 기준으로 설계되어진다. 본 논문은 해석적 기법에 의한 측지망의 최적화 설계를 위하여 측지망의 품질을 평가하기 위한 다양한 기준을 분석하고 제시하기 위한 것으로써 측지망 품질평가 기준으로 정밀도(오자타원, 2DRMS, CEP), 신뢰성(내적신뢰성) 및 견인성(최대전단변형률, 주변형률, 면적변형률)을 제시하고 이를 실제 측지망의 설계에 적용함으로써 그 효용성을 평가하였다. 기관측된 실제 측지망에 8가지 품질평가 인자를 적용하여 측지망 최적화 설계의 효용성을 평가한 결과, 최적화 설계 전 후 품질평가 인자는 평균값에 있어서 정밀도는 2%, 신뢰성은 3%, 견인성은 3,001%로 향상되었으며, 최대값에 있어서 정밀도는 5% 신뢰성은 7%, 견인성은 16,957% 향상된 것으로 분석되었다.

• 한국전자거래학회지
• /
• 제3권2호
• /
• pp.113-124
• /
• 1998

The architectural design requires collaboration among various participants, such as architects, clients and engineers in the stages of the design process. Rapid development of information technology enables effective and prompt exchange and sharing of digital architectural information, otherwise should have been exchanged and managed by traditional ways. However, the core technology for supporting this demands has not been fully investigated so far. This paper aims to show the possibility of adopting network based architectural design information sharing system through surveying and analyzing the state-of-the-art network technology and its uses in architectural information exchange among various design actors. To realize these aims, this paper 1) investigates and analyzes the current status of network technology in the architectural and construction practice, 2) suggests systematic information exchange and sharing mechanism for architectural products and drawings data, and 3) demonstrates network based prototypical architectural information system.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.596-606
• /
• 2008

In this paper, we present a co-design methodology of dynamic optimal network-bandwidth allocation (ONBA) and adaptive control for networked control systems (NCSs) to optimize overall control performance and reduce total network-bandwidth usage. The proposed dynamic co-design strategy integrates adaptive feedback control with real-time scheduling. As part of this co-design methodology, a "closed-loop" ONBA algorithm for NCSs with communication constraints is presented. Network-bandwidth is dynamically assigned to each control loop according to the quality of performance (QoP) information of each control loop. As another part of the co-design methodology, a network quality of service (QoS)-adaptive control design approach is also presented. The idea is based on calculating new control values with reference to the network QoS parameters such as time delays and packet losses measured online. Simulation results show that this co-design approach significantly improves overall control performance and utilizes less bandwidth compared to static strategies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2164-2168
• /
• 2003

Real time control system such as in factory automation fields, defense field, aerospace, railway industries, financial trading and so forth, includes multiple computers on multiple nodes, and share data to process various actions and functions. This is similar to multitasking in a multiprocessor computer system. The task processing efficiency of such system is proportionally increased by process speed of each process computer. And also it is greatly influenced by communication latencies of each node. To provide proper operation of such real time system, a network that can guarantee deterministic exchange of certain amount of data within a limited time is required. Such network is called as a real time network. As for modern distributed control system, the timeliness of data exchange gives important factor for the dynamics of entire control system. In a real time network system, exchanged data are determined by off-line design process to provide the timeliness of data. In other word, designer of network makes up a network data table that describes the specification of data exchanged between control equipments. And by this off-line design result, the network data are exchanged by predetermined schedule. First, this paper explains international standard real time network TCN (Train Communication Network) applied to the KHST (Korean High Speed Train) project. And then it explains the computer program developed for design tool of network data table of TCN.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.128-132
• /
• 2003

This paper presents the optimum design of a Linear Induction Motor (LIM) using Genetic algorithm, Niching Genetic algorithm and Neural Network. The design variables are optimized by different optimization methods and the results are discussed.