• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.975-982
• /
• 2004

In current P2P concept, pure P2P and Hybrid P2P structures are used commonly. Gnutella and Ktella are forms of pure P2P. and forms of Hybrid P2P are innumerable. File searching models exist in these models. These models provide group management for file sharing, searching and indexing. The general file sharing model is good at maintaining connectivity. However, it is defective in group management. Therefore, this study approaches hierarchical structure in file sharing models through routing technique and backup system. This system was designed so that the user was able to maintain group efficiency and connection reliability in large-scale network.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.401-407
• /
• 2005

Simulations are currently an essential tool to develop and test wireless sensor networks (WSNs) protocols and to analyze future WSNs applications performance. Researchers often simulate their proposals rather than deploying high-cost test-beds or develop complex mathematical analysis. However, simulation results rely on physical layer assumptions, which are not usually accurate enough to capture the real behavior of a WSN. Such an issue can lead to mistaken or questionable results. Besides, most of the envisioned applications for WSNs consider the nodes to be at the ground level. However, there is a lack of radio propagation characterization and validation by measurements with nodes at ground level for actual sensor hardware. In this paper, we propose to use a low-computational cost, two slope, log-normal path­loss near ground outdoor channel model at 868 MHz in WSN simulations. The model is validated by extensive real hardware measurements obtained in different scenarios. In addition, accurate model parameters are provided. This model is compared with the well-known one slope path-loss model. We demonstrate that the two slope log-normal model provides more accurate WSN simulations at almost the same computational cost as the single slope one. It is also shown that the radio propagation characterization heavily depends on the adjusted model parameters for a target deployment scenario: The model parameters have a considerable impact on the average number of neighbors and on the network connectivity.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.660-666
• /
• 2014

In this paper, we consider a classification criteria of sensor nodes based on equipment function, and propose a routing search algorithm between node when an IP-USN is applied inside a ship. whereas a tree-type routing algorithm is applied to the limited mobile enviroment, such as engine room or machine room, a mesh-type routing alogrithm is to free mobile enviroment, such as passager corridor liviing quarters or restanrats areas. For mesh-type routing, it is necessary to maintain a seamless route path between a sink node and sensor nodes for which we consider a novel message exchange periodically. We proposed a new message, RDES message, which is issued periodically to update the topology of sensor node and check a connectivity between nodes.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.17-25
• /
• 2011

The wireless mesh networks are recently getting much attention for commercial applications. In such networks, the service should be uninterrupted when roaming from one domain to another while the authentication for a secure access should be maintained. The challenge is to consider the authentic coordination between the home domain and foreign domains and the maintenance of local authenticity between foreign domains. In this paper, a novel authentication method is presented so that a mobile mesh node can be effectively authenticated and obtain an secure connection in foreign domains. In the proposed method, the authentication process does not rely on an end-to-end connection between the foreign domain and the home domain. Even without a connectivity to the home domain, the foreign domain can provide an effective authentication of a mesh node by consulting one of the neighboring foreign domains that has been visited by the mobile mesh node. In order to verify the performance of our proposed method, a qualitative analysis has been performed and compared to those of conventional methods. The results show that our method is superior to the conventional ones in terms of authentication response time and authentication service robustness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.73-80
• /
• 2011

In this paper, we design and implementation of effective remote management system for VoIP(Voice over IP) terminal. Ordinary VoIP terminal is connected inside of NAT(Network Address Translation) assigned private IP address. NAT provides address mapping between outside public IP address and inside private IP address, for outside system telephone call is connected to inside VoIP terminal. In this paper, we also design and implementation of UDP hole punching function that the outside calls pass through the NAT, for outside management system call is connected to internal VoIP terminal, and gathered to management information of the VoIP terminal. Also, we evaluated and analysed of developed system in the test environment. As a result of test, It showed that it was well performed without any data error and data loss in the connectivity, and It showed that it was well gathered management information of the VoIP terminal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.103-112
• /
• 2016

As supply chains are globalized, multinational companies are trying to optimize distribution networks using a hub and spoke structure. In this hub and spoke network structure, multinational companies locate regional distribution centers at hub airports, which serve demands in their corresponding regions. Especially when customers put higher priority on the service lead-time, hinterlands of international hub airports become ideal candidate locations for the regional hub distribution centers. By utilizing excellent airport and logistics services from hub airports, regional distribution centers in the hub airports can match supply with demand efficiently. In addition, regional hub distribution centers may increase air cargo volume of each airport, which is helpful in the current extremely competitive airport industry. In this paper, we classified locational preferences into three primary categories including demand, service and risk and applied the analytic hierarchy process methodology to prioritize factors of locational preferences. Primary preference factors include secondary factors. Demand factor contains access to current and prospect markets. Service factor comprises airport and logistics perspectives. Service factor in terms of airport operations includes secondary factors such as airport service and connectivity. Service factor in terms of logistics operations contains infrastructure and logistics operations efficiency. Risk factor consists of country and business risks. We also evaluated competitiveness of Asian hub airports in terms of candidate location for regional hub distribution centers. The candidate hub airports include Singapore, Hong Kong, Shanghai, Narita and Incheon. Based on the analytic hierarchy process analysis, we derived strategic implications for hub airports to attract multinational companies' regional hub distribution centers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.49-58
• /
• 2015

A floating type of memristor emulator which acts like the behavior of $TiO_2$ memristor has been developed. Most of existing memristor emulators are grounded type which is built disregarding the connectivity with other memristor or other devices. The developed memristor emulator is a floating type whose output does not need to be grounded. Therefore, the emulator is able to be connected with other devices and be utilized for the interoperability test with various other circuits. To prove the floating function of the proposed memristor emulator, a Wheatstone bridge is built by connecting 4 memristor emulators in series and parallel. Also this bridge circuit suggest that it is possible to weight calculation of the neural network synapse.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.832-835
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.929-934
• /
• 2018

The Internet of Things (IoT) is the network of devices embedded with electronics, software, sensors, actuators, and connectivity which enables these objects to connect and exchange data without any human intervention. The importance of time information is increased in order to impose order on scattered sensor data streams, resolving conflicts through time stamp information and so on. Time information and time synchronization are critical building blocks in the IoT. They allow devices to share a consistent notion of time and it is easier to build efficient and robust collaborative services. This paper proposes a standard time management scheme in the Internet of Things. Many IoT applications involve collection and forwarding of event data. It is useful to know when an event occurs for the purposes of triggering an action. In order to verify the feasibility of the proposed scheme, it is implemented and evaluated in the Arduino development environment.