• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1759-1761
• /
• 1999

The generation of pretilt in nematic liquid crystal(NLC)and electro-optical(EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique p-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about $2.5^{\circ}$ with p-polarized UV light irradiation of $20^{\circ}$ on PI-3 surface at 20 min.; However pretilt angle of about $0.5^{\circ}$ are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with p-polarized UV light irradiation of $20^{\circ}$ on PI-1 surfaceat at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau_d$ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.343-346
• /
• 1998

The generation of pretilt angle in nematic liquid crystal (NLC) and electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique P-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about 2.5$^{\circ}$with P-polarized UV light irradiation of 20$^{\circ}$on PI-3 surface at 20 min.; However pretilt angle of about 0.5$^{\circ}$are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with P-polarized UV light irradiation of 20$^{\circ}$on PI-1 surface at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau$$\sub$d/ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1261-1263
• /
• 1998

In this paper, we obtained that the monodomain alignment of nematic liquid crystal (NLC) increases with increasing irradiation time with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of NLC is obtained in a cell with normally LPUV light irradiated on PI surface at 30 min. and then oblique LPUV is secondly irradiated on PI surfaces rotated by $90^{\circ}$. The pretilt angle of NLC is generated about $2.5^{\circ}$ with oblique angle of $60^{\circ}$ and then decreased with increasing the oblique angle of IN light irradiation. It is considered that the pretilt angle of NLC is attributed to the photo-depolymerization of polymer with the oblique angle of UV light. The voltage-transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time of 60 min. were almost same in comparison with rubbing treated TN-LCD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• Transactions on Electrical and Electronic Materials
• /
• 제4권4호
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.202-205
• /
• 2004

We investigated the electro-optical(EO) performances of the super twisted nematic liquid crystal display(STN-LCD) on the polyimide(PI) surface using polymer film. The NLC pretilt angles generated are about $18^{\circ}$ by the rubbing alignment method on thin plastic substrates. However, the pretilt angle are at about $13^{\circ}$ lower on the glass substrate than on thin plastic substrate. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance(V-T) curve of the plastic STN-LCD was observed on the polyimide(PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide(PI) surfaces using polymer film can be achieved.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.75-79
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultravi-olet (UV) light irradiation during imidization of polymide. The generated pretilt angle of nematic (N) LC by using the in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. In case of using the polymer(AL-3046), we found that the in-situ Uv photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.341-344
• /
• 2001

We synthesized a photo-crosslinkable polymide (polymide (PI)-chalcone-biphenyl (BP)) based polymer and control of pretilt angle for a nematic liquid crystal (NLC) using two kinds of the photodimerization methods by polarized UV exposure the photopolymer surfaces was studied. Pretilt angle of the NLCs using a conventional photodimerization method could be varied between 0$^{\circ}$ and 3$^{\circ}$, by controlling the condition of UV exposure. Pretilt angle of the NLCs using the conventional photodimerization method was higher than a in-situ photodimerization method.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.332-336
• /
• 2000

We have developed a novel vertical-alignment(VA) -$\pi$ cell mode that provides a wide viewing angle and fast response times for nematic liquid crystal(NLC) with negative dielectric anisotropy on a homeotropic polymide(PI) surfaces. Good voltage-transmittance curves and low driving voltages were achieved with the new VA-$\pi$ cell mode without a negative compensation film. Iso-viewing angle characteristics using the new VA-$\pi$ cell mode without a negative compensation film was also successfully observed. As well a fast response time of 31.7 ms for a new VA-$\pi$ mode was measured. Consequently the iso-viewing angel fast response time and low driving voltage characteristics using a VA-$\pi$ cell can be achieved.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.700-703
• /
• 2000

We investigated the improvement using a new patterned double twisted(PDT) vertical-alignment(VA) cell mode on a homeotropic alignment layer. Good voltage-transmittance curves for negative dielectric anisotropic nematic liquid crystal (NLC) using a new PDT-VA cell without a negative compensation film were obtained. The viewing angle of a new PDT-VA cell without a negative compensation film was sider than that of a conventional VA cell. Finally a few fabrication processes using a new PDT-VA cell mode can be achieved by only one-side rubbed substrate.