• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5455-5459
• /
• 2013

Background: The risk of malignancy index (RMI) for the evaluation of adnexal masses is a sensitive tool in certain populations. The best cut off value for RMI 1, 2 and 3 is 200. The cut off value of RMI-4 to differentiate benign from malignant lesions is 450. Our aim was to evaluate the efficiency of four different malignancy indexes (RMI1-4) in a homogeneous population. Materials and Methods: We evaluated a total of 153 non-pregnant women with adnexal masses who did not have a history of malignancy and who were above 18 years of age. Results: A cut-off value of 250 for RMI-1 provided 95.9% inter-observer agreement, yielding 95.9% specificity, 93.5% negative predictive value, 75.0% sensitivity and 82.8% positive predictive value. A cut-off value of 250 for RMI-1 showed high performance in preoperative diagnosis of invasive malignant lesions than cut-off value of 200 in our population. A cut-off value of 350 for RMI-2 provided 94.5% inter-observed agreement, yielding 94.2% specificity, 93.4% negative predictive value, 75.0% sensitivity and 77.4% positive predictive value. RMI-2 showed the higher performance when the cut-off value was set at 350 in our population. A cut-off value of 250 provided 95.2% inter-observer agreement, yielding 95.0% specificity, 93.2% negative predictive value, 75.0% sensitivity, and 88.0% positive predictive value. RMI-3 showed the highest performance to diagnose malignant adnexal masses when the cut-off value was set at 250. In our study, RMI-4 showed similar statistical performance when the cut-off value was set at 400 [(Kappa: 0.684/p=0.000), yielding 93.8% inter-observer agreement, 93.4% specificity, 93.4% negative predictive value, 75.0% sensitivity, and 75.0% negative predictive value]. Conclusions: We showed successful utilization of RMIs in preoperative differentiation of benign from malignant masses. Many studies conducted in Asian and Pacific countries have reported different cut-off values as was the case in our study. We think that it is difficult to determine universally accepted cut-off values for RMIs for common use around the globe.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• International Journal of High-Rise Buildings
• /
• v.8 no.4
• /
• pp.283-290
• /
• 2019

Corner cut, corner chamfered or a building shape change are adopted in the design of tall buildings to achieve aerodynamic superiority as well as response reduction. Kikuchi et.al pointed out that large negative peak external pressures can appear near the inside corner of set-back low rise buildings. It is therefore necessary to pay attention to facade design around steps in building surfaces. Peak wind pressures for corner cut or corner chamfered configurations are given in the AIJ code. However, they cannot be applied where there are many variations of vertical and horizontal steps. There has been no previous systematic research on peak wind pressures around steps in building surfaces. In this study, detailed phenomenon of peak wind pressures around steps in buildings are investigated focusing on vertical and horizontal distances from the building's corner.

• Journal of the Korean Society of Radiology
• /
• v.81 no.1
• /
• pp.157-165
• /
• 2020

Purpose To evaluate the optimal measurement location, cut-off value, and diagnostic performance of S-Shearwave in differential diagnosis of breast masses seen on ultrasonography (US). Materials and Methods During the study period, 225 breast masses in 197 women were included. S-Shearwave measurements were made by applying a square region-of-interest automatically generated by the US machine. Shearwave elasticity was measured three times at four different locations of the mass, and the highest shearwave elasticity was used for calculating the optimal cut-off value. Diagnostic performance was evaluated by using the area under the receiving operator characteristic curve (AUC). Results Of the 225 breast masses, 156 (69.3%) were benign and 69 (30.7%) were malignant. Mean S-Shearwave values were significantly higher for malignant masses (108.0 ± 70.0 kPa vs. 43.4 ± 38.3 kPa; p < 0.001). No significant differences were seen among AUC values at different measurement locations. With a cut-off value of 41.9 kPa, S-Shearwave showed 85.7% sensitivity, 63.9% specificity, 70.7% accuracy, and positive and negative predictive values of 51.7% and 90.8%, respectively. The AUCs for US and S-Shearwave did not show significant differences (p = 0.179). Conclusion S-Shearwave shows comparable diagnostic performance to that of grayscale US that can be applied for differential diagnosis of breast masses seen on US.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.286-291
• /
• 1999

This study was carried out to determine the effect of dose and timing of gamma irradiation and post-irradiation treatment with some preservatives of cut flowers on their longevity of rose and chrysanthemum. Cut roses which were soaked in 2% sugar solution persist to 0.75 kGy irradiation treatments. In post-treatments with some preservative solutions, the mixture group of 2% sucrose,2000m silver nitrate and 3.0% crysal were available in flower quality, but the 200 ppm silver nitrate solution treatment showed serious blackening of floral stems and resulted On negative effect in flower quality. Effect of gamma irradiation and all preservative solutions on the cut mum longevity were showed almost same tendency with rose cut flower longevity experiments. The 2% sugar dipping solution in mum cut flower showed the most superior preservative effect compared with the my other preservative solutions tested. Also non-irradiated treatment extended to flower up to complete wilt.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.88-91
• /
• 2000

An MMIC oscillator operating at the 24.55 GHz has been designed using 0.2 ${\mu}{\textrm}{m}$AlGaAs/InGaAs/GaAs Pseudomorphic HEMT technology. The active device used in the oscillator design has a 0.2 ${\mu}{\textrm}{m}$ gate length PHEMT with 4$\times$80 ${\mu}{\textrm}{m}$ gate width. We obtained 4.08 dB of S$_{21}$ gain and 317 mS/mm of transconductance, and extrapolated unit current gain cut-off frequency (f$_{T}$) and maximum oscillation frequency (fmax) were 62 GHz and 120 GHz, respectively. The circuit are based on a series feedback and negative resistance topology. Microstrip line open stub is used to terminating. The oscillator circuits has designed for delivering maximum power to load and conjugated matching. The simulated small signal negative resistance was 50 Ω. We obtained 1.002 of loop gain and 0.0005$^{\circ}$angle from the simulation by HP libra 6.1. The layout for oscillator is 1.2$\times$1.8 $\textrm{mm}^2$.>.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.98.2-99
• /
• 2003

Bacterial canker of sweet cherry (Prunus cerasus L.) was observed in farmers' orchard in Goesan, Chungbuk in 2003. Typical canker symptom occurred on the branches or twigs of sweet cherry in early spring and bacterial exudates oozed out of the cracked barks of diseased trees. Watersoaked brown symptom appeared on the leaves and severe infection caused thorough defoliation on the branches or twigs of sweet cherry. When cut the severely infected branches or twigs, irregular and rusty-colored symptoms in sapwood and heartwood were clearly found, indicating that they could serve as specific symptoms of bacterial canker of sweet cherry. The gram negative, aerobic bacterium isolated from the lesion produced fluorescent pigments on King's B agar medium but did not grow at 37$^{\circ}C$ The bacterium formed Levan-type colonies, and showed negative reactions in oxidase reaction, arginine dihydrolysis test, and pectolytic activity Based on the biochemical and pathological characteristics, the causal organism was identified as Pseudomonas syringae pv. morsprunorum. This is the first report on bacterial canker of sweet cherry in Korea.

• The Pure and Applied Mathematics
• /
• v.19 no.1
• /
• pp.23-35
• /
• 2012

Given a set ${\Omega}$ and the notion of bipolar valued fuzzy sets, the concept of a bipolar ${\Omega}$-fuzzy sub-semigroup in semigroups is introduced, and related properties are investigated. Using bipolar ${\Omega}$-fuzzy sub-semigroups, bipolar fuzzy sub-semigroups are constructed. Conversely, bipolar ${\Omega}$-fuzzy sub-semigroups are established by using bipolar fuzzy sub-semigroups. A characterizations of a bipolar ${\Omega}$-fuzzy sub-semigroup is provided, and normal bipolar ${\Omega}$-fuzzy sub-semigroups are discussed. How the homomorphic images and inverse images of bipolar ${\Omega}$-fuzzy sub-semigroups become bipolar ${\Omega}$-fuzzy sub-semigroups are considered.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.4
• /
• pp.23-32
• /
• 2015

This paper addresses the effects of extreme rainfall on the stability of cut slopes in Yen Bai city, Northern Viet Nam. In this area, natural slopes are excavated to create places for infrastructures and buildings. Cut slopes are usually made without proper site investigations; the design is mostly based on experience. In recent years, many slope failures have occurred along these cuts especially in rainy seasons, resulting in properties damaged and loss of lives. To explain the reason that slope failure often happens during rainy seasons, this research analyzed the influence of extreme rainfalls, initial ground conditions, and soil permeability on the changes of pore water pressure within the typical slope, thereafter determining the impact of these changes on the slope stability factor of safety. The extreme rainfalls were selected based on all of the rainfalls triggering landslide events that have occurred over the period from 1960 to 2009. The factor of safety (FS) was calculated using Bishop's simplified method. The results show that when the maximum infiltration capacity of the slope top soil is less than the rainfall intensity, slope failures may occur 14 hours after the rain starts. And when this happens, the rainfall duration is the deciding factor that affects the slope FS values. In short, cut slopes in Yen Bai may be stable in normal conditions after the excavation, but under the influence of tropical rain storms, their stability is always questionable.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.175-182
• /
• 2019

This study was conducted to test the assessment validity and examine the cut-off scores for driving risk as a part of the Self-report Assessment Forecasting Elderly Driving Risk (SAFE-DR) development project. The 132 senior drivers were categorized as either risky of 58 or safe of 74 drivers through the Drivers 65 Plus. Based on this initial assessment, we analyzed the risk prediction cut-offs. Furthermore, we tested the construct, content, and predictive validity. The cut-off score for the prediction of driving risk was found to be 74.5 points. The positive predictive value was 88.6%, and the negative predictive value was 86.3% about the cut-off score, signifying an excellent level of discrimination. Convergent validity, nomological validity, and content validity were found to be appropriate. Therefore, this study confirms that SAFE-DR is an appropriate assessment that can be used to screen dangerous elderly drivers.