• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2335-2342
• /
• 2007

Laser stimulation has been widely studied and used in clinic. However, electrical response by laser stimulation on meridians has not been investigated. In this study, we compared electric potential of laser and acupuncture stimulation on meridians. We measured electric potential variation at acupoints(Samgan(LI3) and Hapgok(LI4)) on Large Intestine Meridian. In laser stimulation results, average peak electric potential is very low($7.53{\pm}3.44{\mu}V$) for before and after stimulation. However, acupuncture stimulation was performed in ground connection condition and resulted in huge variation of average peak electric potential($2.65{\pm}1.53mV$). That is, the intensity and pattern of electric potential were dependent on the ground connection condition and individual. Also, the electric potential pattern was very similar to the pattern of electric charge and discharge of capacitor. The acupuncture stimulation using a insulating needle resulted in lower average peak electric potential variation($0.25{\pm}0.16mV$) than that of acupuncture stimulation. It might present little electrical response of acupuncture stimulation using insulating needles. In point of electrical response, the laser stimulation was determined to be no acupuncture effect at meridian. Acupuncture stimulation seems to be most effective method to induce electrical response at meridians. The procedure and effect of acupuncture might be considered as energy consensus phenomenon by transportation of bio-ion charge between a practitioner and patient.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.275-286
• /
• 2018

The purpose of this study was to evaluate the effect of needle tip design and position, and irrigant flow rate on apical pressure (AP) during root canal irrigation. Five human mandibular premolars were instrumented up to #35 (0.06 taper) using nickel-titanium rotary instruments. Three different needles according to change of needle tip design (notched, side-vented, and flat) were positioned at the point of 1, 3, and 5 mm from the apical constriction (needle tip position). For each needle tip design and position, APs were measured with varying flow rates of 0.05, 0.1, 0.2, and 0.3 ml/s. When the other conditions were controlled, AP increased with decreasing needle tip position or increasing irrigant flow rate (p<0.05). The AP of flat needle was the highest, followed by notched, side-vented needle for the same needle tip position and irrigant flow rate. The APs at needle tip position of 1 mm or with more than 0.1 ml/s flow rate were higher than central venous pressure (5.88 mmHg) for all conditions. Flat needle was not recommended for clinical use due to sharp increase of AP with changing needle tip position and irrigant flow rate. For safe and effective root canal irrigation, irrigant should be applied with the needle tip position of 3 mm and flow rate of less than 0.05 ml/s.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.1
• /
• pp.27-47
• /
• 2019

Purpose : This study was designed to identify the perception and practice level of infection control among korean medical doctors and to identify factors that may influence the performance and practice level. Methods : Data were collected using the on­line survey method. Seven hundred and eighty four Korean medical doctors(KMD) participated the survey. The study was conducted from December 2018 to January 2019. Results : The results of this study are as follows. 1. Participants who experienced infection risk by needles or sharp instruments were 596(76%). and participants who had experienced blood or body fluid contact with the mucous membrane or skin of the patient during treatment were 226(28.8%) of them. 2. The degree of perception and practice of the infectious guideline was higher in the group over 50 years, in the doctor group, in the group with more than 6 years experience in clinic and in the group who work in the hospital. (p < 0.05) 3. In the performance of the infection control management related to the Korean medical treatment, the practice level of the article 'Discard the remaining needle that used for one patient' was the lowest at 4.02, 'Identify the patient and check the validity period of sterilization of medicines or instruments' was the second lowest in 4.16. 4. Among the contents of "Prevention of Nosocomial infection and Sanitary Safety Guidelines" issued by the Korean Medical Association in 2008, the guideline "Prevention of infection by pathogens such as HIV, MRSA, SARS" were lowest article in the perception and practice level of participants. 5. Regression analysis was performed to find out the factors affecting perception and performance of the participants. The regression model showed significant difference in the regression model of the working years. (p < 0.05) 6. In order to examine the effect of the variables on the perception and practice of the infectious guideline, the mediated effect of the knowledge and education level according to the years of working, age, education degree was found to be significant only in the education degree variable. (p < 0.05) In conclusion : in order to improve the perception and practice of infectious control of Korean medicine doctors, it is necessary to include the contents of infection management as essential education during the continuing education of Korean medicine association.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.402-407
• /
• 2011

The objectives of this study were to analyze the crown vertical structure, crown bulk density, and to develop regression models for predicting crown fuel load using the data from 10 destructively sampled Pinus densiflora trees in Bonghwa, Gyeongbuk. The fuel loads were observed higher in the middle portion of the vertical distribution of crown followed by the lower portion and upper portion of Pinus densiflora, respectively. Approximately 25% crown fuel load was found in the needle while 33% was observed in the branches with <1 cm diameter with a total of 58% available fuel loads. The average crown bulk density was $0.45kg/m^3$, and $0.27kg/m^3$ of this was available in the needles and branches with <1 cm diameters. The resulting models in linear equations were able to account for 84% and 88% of the observed variation, while the allometric equations with diameter at breast height as the single predictor showed better results to account for 90% and 95% of the observed variation in the available crown fuel loads and total crown fuel loads, respectively. The suggested equations in this study could provide quantitative fuel load attributes for crown fire behavior models and fire management of red pine stands in Bonghwa areas.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.359-366
• /
• 2011

The objective of this study was to analyze the changes of crown fire hazard possibility from the effects of forest tending works (FTW) in Pinus densiflora stands in Korea. The study sites were located in Youngju (FTW) and Bonghwa (Control) areas. Ten representative sample trees were destructively felled at each areas to analyze the crown fuel characteristics. The results of this study showed that crown fuel moisture content in Youngju and Bonghwa areas were 103.6% and 104.4%, respectively. The needles and twigs with less than 1cm diameter accounted 50.3% of the total crown fuel load in Youngju area and 62.0% in Bonghwa area. On the other hand, it was observed in Youngju that the canopy bulk density was $0.11kg/m^3$ lower but have 1.3 m higher average canopy base height therefore having a possibility of lower crown fire hazard as compared to Bonghwa that had higher canopy bulk density and lower canopy base height.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.42-51
• /
• 2011

This study was conducted to analyze correlation of above- and below-ground biomass and to drive regression equation suitable for estimating standing tree biomass between natural and planted stands of Pinus densiflora for. erecta of one age-class in Gangwon province, Republic of Korea. Total 40 trees, 10 from the naturally regenerated and 10 from the planted stands in each of two studied sites, were uprooted to measure height, diameter at root color (DRC), and the dry weights of stem, branches, and needles. The length, weight, and volume of the main and horizontal roots were also measured. Most of the above-ground traits except height were highly correlated with most of the other above-ground traits and the below-ground traits except the length of roots (p < 0.05). Especially, the DRC, which is measured easily on the standing tree, was highly correlated with most of the traits in all studied stands (p < 0.01). Thus, the DRC would be the most desirable trait to estimate not only above-ground biomass but also below-ground biomass. However, height was not a good variable to estimate standing tree biomass of Pinus densiflora for. erecta of one age-class in Gangwon province because it was not correlated with most of other traits. Regression equations derived from the current study could be used effectively as a basic data for estimating above-ground and below-ground biomass using DRC.

• Korean Journal of Metals and Materials
• /
• v.47 no.3
• /
• pp.147-154
• /
• 2009

The effect of carbon addition on the microstructures and mechanical properties of $Ni_3Al$ and TiAl intermetallic alloys have been characterized. It is shown that carbon is not only an efficient solid solution strengthener in $Ni_3Al$ and TiAl, it is also an efficient precipitation strengthener by fine dispersion of carbide. Transmission electron microscope investigation has been performed on the particle-dislocation interactions in $Ni_3Al$ and TiAl intermetallics containing various types of fine precipitates. In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide, which has the cube-cube orientation relationship with the matrix, appear during aging. Typical Orowan loops are formed in $Ni_3Al$ containing fine dispersions of $M_{23}C_6$ particles. In the L10-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction (SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ is and $[1120]_{Ti2AlC}//[101]_{L10\;matrix}$. High temperature strength of TiAl increases appreciably by the precipitation of fine carbide. Dislocations bypass the carbide needles at further higher temperatures.

• Korean Journal of Food Science and Technology
• /
• v.53 no.3
• /
• pp.290-295
• /
• 2021

This study investigated the antioxidant effects of complex extracts from pine needles (PN), green tea (GT), and sea buckthorn leaves (SL). Measurement of total polyphenol and flavonoid content, DPPH radical scavenging activity (DPPH), ABTS⁺ radical scavenging activity (ABTS), and reducing power (RP), showed that SL extract (SE) had the highest values. The superoxide radical scavenging activity (SSA) and nitrite scavenging activity (NSA) were the highest in the GT extract (GE). In most experiments, the PN extract (PE) showed higher activity in complex extracts than in single extracts. The combination of GT and SL led to a higher activity than that exhibited by GT (DPPH and ABTS at 300 ppm, RP at 100 and 500 ppm) and SL (SSA at 100 ppm and NSA at 300 ppm) alone. These results suggest that the combination of PE, GE, and SE may be a useful functional food material in the food industry.

• Journal of Korean Society of Forest Science
• /
• v.110 no.1
• /
• pp.13-21
• /
• 2021

In this research, monoterpene emissions were investigated from pine trees(Pinus densiflora) and in the forest air in Simwon village at the Jiri Mountain. Air samples from an enclosed chamber and pine forest air were collected using a Tenax TA Tube five times a day(at 09:00, 11:00, 13:00, 15:00, and 17:00) on 1 day per month from March to November 2014. Selected needles and branches from individual pine trees were enclosed for the measurement of their monoterpene emissions. The concentration and composition of emitted monoterpenes were analyzed in a time series. The major components of monoterpenes emitted from pine trees were α-pinene, β-myrcene, β-phellandrene, and β-pinene. Seasonal data showed that the concentration of monoterpenes emitted from pine trees began increasing in June and reached its peak in August, decreasing thereafter. In addition, seasonal emissions of monoterpenes were dependent on environmental factors such as temperature. The major species of monoterpenes in forest air were α-pinene, β-pinene, and camphene. The concentration of monoterpenes in forest air began rising from March to April and reached its peak in May; multiple peaks subsequently formed in July and November. Diurnal variation in monoterpenes decreased from 09:00-10:00, reaching a low and high at 13:00-14:00 and 17:00-18:00, respectively.

• The Korean Society of Law and Medicine
• /
• v.23 no.1
• /
• pp.149-176
• /
• 2022

South Korean law strictly prohibits engagement in medical activities by non-medical practitioners. In the country, tattooing is classified as a medical practice, and non-medical practitioners who engage in it are penalized because they are unauthorized to carry out this procedure. In reality, however, people rarely seek tattooing services from medical personnel. Arguing that their freedom of job selection is violated, non-medical personnel who make a living as tattoo artists reject the characterization of the procedure as a form of medical treatment and demand the decriminalization of tattooing by non-medical practitioners. Nevertheless, tattooing can cause health- and hygiene-related dangers when it is not performed by medical professionals because it involves penetration into the skin using needles. Hence, stringent management is necessary for infection prevention. The gap between reality and the law gives rise to the need for proactive thinking about the institutionalization of tattoo practice by non-medical personnel. Policymakers should reflect on the fact that only minimal tattooing services are currently performed by medical staff while also accounting for health and safety. On this basis, this study examined tattoo-related legislation in South Korea to determine whether the procedure corresponds to medical practice and identify ways to solve problems that occur from the perspective of health care. As a response that promotes safety and reflects reality, this research proposed a three-phase approach.