• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제33권4호
• /
• pp.1433-1446
• /
• 2013

In this study, we proposed a methodology to develop Rating Curves for high water level using rainfall generation by the Monte Carlo Simulation (MCS) technique, optimized rainfall-runoff model, and flood routing model in an urban stream. The developed stage discharge Rating Curve based on observed data was contained flow measurement errors and uncertainties. The standard error ($S_e$) for observations was 0.056, and the random uncertainty ($2S_{mr}$) was analyzed by ${\pm}1.43%$ on average, and up to ${\pm}4.27%$. Moreover, it was found that the Rating Curve extensions by way of logarithmic and Stevens methods were overestimated to compare with the urban basin scale. Finally, we confirmed that the high water level extension by random generation of hydrological data using MCS can be reduced uncertainty of the high water level, and it will consider as a more reliable approach for high water level extension. In the near future, this results can be applied to real-time flood alert system for urban streams through construction of the high water level extension system using MCS procedures.

• The Bulletin of The Korean Astronomical Society
• /
• 제43권1호
• /
• pp.41.1-41.1
• /
• 2018

We introduce a current status and future plans of Korea Microlensing Telescope Network (KMTNet) microlensing experiments, which include an observational strategy, pipeline, event-finder, and collaborations with Spitzer. The KMTNet experiments were initiated in 2015. From 2016, KMTNet observes 27 fields including 6 main fields and 21 subfields. In 2017, we have finished the DIA photometry for all 2016 and 2017 data. Thus, it is possible to do a real-time DIA photometry from 2018. The DIA photometric data is used for finding events from the KMTNet event-finder. The KMTNet event-finder has been improved relative to the previous version, which already found 857 events in 4 main fields of 2015. We have applied the improved version to all 2016 data. As a result, we find that 2597 events are found, and out of them, 265 are found in KMTNet-K2C9 overlapping fields. For increasing the detection efficiency of event-finder, we are working on filtering false events out by machine-learning method. In 2018, we plan to measure event detection efficiency of KMTNet by injecting fake events into the pipeline near the image level. Thanks to high-cadence observations, KMTNet found fruitful interesting events including exoplanets and brown dwarfs, which were not found by other groups. Masses of such exoplanets and brown dwarfs are measured from collaborations with Spitzer and other groups. Especially, KMTNet has been closely cooperating with Spitzer from 2015. Thus, KMTNet observes Spitzer fields. As a result, we could measure the microlens parallaxes for many events. Also, the automated KMTNet PySIS pipeline was developed before the 2017 Spitzer season and it played a very important role in selecting the Spitzer target. For the 2018 Spitzer season, we will improve the PySIS pipeline to obtain better photometric results.

• Journal of the Microelectronics and Packaging Society
• /
• 제17권3호
• /
• pp.17-26
• /
• 2010

Pb-Sn solder is rapidly being replaced by lead-free solder for board-level interconnection in microelectronic package assemblies due to the environmental protection requirement. There is a general lack of mechanical reliability information available on the lead-free solder. In this study, thermo-mechanical behaviors of wire-bond plastic ball grid array (WB-PBGA) package assemblies are characterized by high-sensitivity moire interferometry. Experiments are conducted for two types of WB-PBGA packages that have Pb-Sn solder and lead-free solder as joint interconnections. Using real-time moire setup, fringe patterns are recorded and analyzed for several temperatures. Bending deformations of the assemblies and average strains of the solder balls are investigated and compared for the two type of WB-PBGA package assemblies. Results show that shear strain in #3 solder ball located near the chip shadow boundary is dominant for the failure of the package with Pb-Sn solder, while normal strain in #7 most outer solder ball is dominant for that with lead-free solder. It is also shown that the package with lead-free solder has much larger bending deformation and 10% larger maximum effective strain than the package with Pb-Sn solder at same temperature level.

• Journal of the Korean Data and Information Science Society
• /
• 제26권5호
• /
• pp.1071-1085
• /
• 2015

The researchers attempted to develop a way to extract a near real-time online nation image using social media. Referring to previous studies about nation images and the categories defined in Wikipedia, an ontology considering the characteristics of nation image was constructed. Separately, data sets from various social media were compared and the click view of Wikipedia English-edition was selected. The ontology was applied to the recent six years of the data extracted of the three big exporting countries of the east Asia, China, Japan, and Korea. To compare the nation images, correspondence analysis was employed to show images in the area of politics, society, culture, and economy. The nation images extracted are indeed the reasonable representation of them. The researchers verified them to a few known government policies and confirmed that it could be used to help government officers to make foreign policies to boost nation's export and to employ as a key performance index for them.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제46권3호
• /
• pp.44-51
• /
• 2009

It is very important to verify generated setup errors in cancer therapy by using a high energy radiation and to perform the precise radiation therapy. Specially, the verification of treatment position is very crucial in special therapies like fractionated stereotatic radiotherapy (FSRT). The FSRT uses normally high-dose, small field size for treating small intracranial lesions. To estimate the developed FSRT system, the isocenter accuracy of gantry, couch and collimator were performed and a total of inaccuracy was less than ${\pm}1mm$. Precise beam targeting is crucial when using high-dose, small field size FSRT for treating small intracranial lesions. The EPID image of the 3mm lead ball mounted on the isocenter with a 25mm collimator cone was acquired and detected to the extent of one pixel (0.76mm) after comparing the difference between the center of a 25mm collimator cone and a 3 mm ball after processing the EPID image. In this paper, the radiation treatment efficiency can be improved by performing precise radiation therapy with a developed video based EPID and FSRT at near real time

• Journal of Advanced Navigation Technology
• /
• 제15권4호
• /
• pp.523-535
• /
• 2011

The precipitable water vapor (PW) was estimated using Global Navigation Satellite System (GNSS) from several GNSS stations within the Korean Peninsula. Nearby radiosonde sites covering the GNSS stations were used for the comparison and validation of test results. GNSS data recorded under typical and severe weather conditions were used to generalize our approach. Based on the analysis, we have confirmed that the derived PW values from the GNSS observables were well agreed on the estimates from the radiosonde observables within 10 mm level. Assuming that the GNSS observables could be a good weather monitoring tool, we further tested the performance of the current WAAS tropospheric delay model, UNB3, in the Korean Peninsula. Especially, the wet zenith delays estimated from the GNSS observables and from UNB3 delay model were compared. Test results showed that the modelled approach for the troposphere (i.e., UNB3) did not perform well especially under the wet weather conditions in the Korean Peninsula. It was suggested that a new model or a near real-time model (e.g., based on regional model from GNSS or numerical weather model) would be highly desirable for the Korean WA-DGNSS to minimize the effects of the tropospheric delay and hence to achieve high precision vertical navigation solutions.

• Membrane Journal
• /
• 제28권4호
• /
• pp.252-259
• /
• 2018

An acidic, real metal-plating wastewater was treated by a fluidized bed membrane reactor introduced with granular activated carbon (GAC) as fluidized media. With GAC fluidization, there was no increase in suction pressure with time at each flux set-point applied. At neutral solution pH, much less fouling rate was observed than acidic pH under GAC fluidization. Higher solution pH resulted in the increase in particle size in metal-finishing wastewater, thus producing a less dense cake structure on membrane. More than 95% of chemical oxygen demand was observed from the fluidized bed membrane reactor under GAC fluidization. Total suspended solid concentration in membrane permeate was near zero. At the raw wastewater pH, no removal of copper and chromium by the fluidized bed membrane reactor was observed. As the pH was increased to 7.0, removal efficiency of copper and chromium was increased considerably to 99 and 94%, respectively. Regardless of solution pH tested, more than 95% of cyanide was removed possibly due to the strong adsorption of organic-cyanide complex on GAC in fluidized bed membrane reactor.

• Journal of Information Management
• /
• 제31권1호
• /
• pp.12-42
• /
• 2000

Digital library research has attracted much attention. While many research projects are funded by government agencies and national and international bodies, some are run by specific academic and research institutions and libraries. While some digital library projects, such as the ELINOR project in the UK, the first two phases of the eLib(Electronic Libraries) programme in the UK, and the first phase of the DLI(Digital Library Initiative) in the USA, are now over, a number of other projects are currently under-way in different parts of the world. Beginning with the definitions and characteristics of digital libraries proposed by various researchers, this paper provides brief accounts of some major digital library projects that are currently in progress, or are just completed, in different parts of the world. There follows a review of digital library research under 16 major headings. Literature for this review has been identified through a search on the LISA CD-ROM database and a Dialog search on library and information science databases, and the resulting output has been supplemented by a scan of the various issues of D-Lib Magazine and Ariadne, and the Web sites of various organizations and institutions engaged in digital library research. The review indicates that we have learned a lot through digital library research within a short span of time. However, a number of issues are yet to be resolved. The paper ends with an indication of the research issues that need to be addressed and resolved in the near future in order to bring the digital library from the researcher's laboratory to the real life environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• 제1권1호
• /
• pp.86-98
• /
• 1998

In order to provide an information as input data of possible storm surges in advance, the typhoon center and maximum wind position analysis scheme must be developed for the initialization of pressure and wind field.This study proposes a semi-automatical and objective analysis method and a procedure on a real time basis using the satellite TBB data of the GMS IR1, NOAA satellite CH4 and CH5, and shows the result of an experimental analysis. It includes a simple method of determining the parameters of the typhoon using minimum top temperature of the convective cloud near the inner eyewall. The method analyzing the isotropic cross sectional variation of TBB gradient from center to environment was developed to determine the center of Rmax of typhoon. This position of intense eyewall from typhoon center can be considered as the position of maximum wind. The results of estimation of typhoon center show very good agreement to the results of synoptic analysis. It is found that the Rmax is approximately 50-200km. From the comparison of the GMS and NOAA IR TBB data, it is found that the Rmax from NOAA data tends to be longer than those from GMS data.

• Tunnel and Underground Space
• /
• 제26권1호
• /
• pp.1-11
• /
• 2016

This study deals with the case that was the field application of the microseismic monitoring techniques for the stability monitoring in a domestic mine. The usefulness and limitations of the microseismic techniques were examined through analyzing the microseismic monitored data. The target limestone mine adopted a hybrid room-and-pillar mining method to improve the extraction ratio. The accelerometers were installed in each vertical pillar within the test bed which has the horizontal cross-section $50m{\times}50m$. The measured signals were divided into 4 types; blasting induced signal, drilling induced signal, damage induced signal, and electric noise. The stability analysis was performed based on the measured damage induced signals. After the blasting in the mining section close to the test bed, the damage of the pillar was increased and rockfall near the test bed could be estimated from monitored microseismic data. It was possible to assess the pillar stability from the changes of daily monitored data and the proposed safety criteria from the accumulated monitored data. However, there was a difficulty to determine the 3D microseismic source positions due to the 2D local sensor arrays. Also, it was needed to use real-time monitoring methods in domestic mines. By complementing the problems encountered in the mine application and comparing microseismic monitored data with mining operations, the microseismic monitoring technique can be used as a better safety method.