• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.383-384
• /
• 2010

The control surface on a ship is to control the motion of it in forward and backward states. In this paper, the measured results has been compared with each other to predict the backward flow characteristics of the single rudder's 2-dimensional section at $Re=2.0\times10^4$ using 2-frame grey level cross correlation PIV method especially, The separation region appears at 10 to 20 degrees angle of attack in a forward state. The separation point and boundary layer demonstrate in the same angle of attack compared it with the forward states.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.352-360
• /
• 2016

In this paper, a novel multiple multicast feed-back scheme for improving multimedia multicast and broadcast system based on IEEE 802.11. The proposed scheme improves multicast PPDU delivery ratio of next generation wireless LAN by utilizing multicast feed-back information. By using the proposed scheme, regardless of its size of multicast group, an AP STA could collect transmission failure information by receiving simultaneous NAK frame. The proposed scheme shows large performance enhancement in broadcast or multicast system of Intelligent Transport System and Passenger Entertainment Service. According to the analysis results, the proposed scheme could enhance wireless LAN multicast and broadcast performance significantly.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.823-832
• /
• 2011

Recently, as the project becomes larger and the number of project increases by the information system integration in the public and financial sectors, it is necessary to have a proper plan to manage the information system project. There have been many researches about the project management, success elements and failure elements, but the research on the interrelation between project management areas leaves much to be desired. This research deduces the scope, schedule, quality, work force and risk as the project management areas from the preceding research and the questionnaire and interview with PM developers, information system builders and data processing experts. And, it analyzes the interrelation and the relative importance between management areas, classifies the progress of the management areas under plan, implementation and completion stage and presents the frame to evaluate the accomplishment of each progress.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.125-126
• /
• 2007

In this paper, the floating body with vertical plate is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame particle tracking method. This paper introduce an analysis method to predict the characteristics if flow around the neighboring fields if Floating Body with vertical plate in order to investigate a high performance model. Flow visualization has conducted in a drcu1ating water channel by a high speed camera and etc. Flow phenomena according to turbulence intensity distribution and flow separation around the floating body with vertical plate were obtained by two-dimensional PIV system.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.69-76
• /
• 2002

With the growth of data communication service by mobile devices, WAP is proposed to efficiently access the Internet contents by user request through wireless condition that has a high error rate and mobility. But, because a transmission speed of WAP is limited, it takes many times to transmit and to receive the data. This paper has studied the WAP packet transmission time using WTP-SAR algorithm. As a method that is to improve transfer capability of WAP, using SAR function in WTP, total message down from upper layer has been fragmented and packet is transmitted through RLP frame time slot. Then, we have analyzed the transmission time of WAP packet with variable RLP layer size on the wireless CDMA network for next generation systems. From the results, we could obtain the WAP packet transmission time and optimal WTP packet size.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.156-166
• /
• 1999

In multi-vehicle tracking systems Kalman filter is generally used for tracking vehicles. Despite well known advantages of Kalman filter that presents optimality with constraints, it is difficult to track several vehicles in real time simultaneously due to a large number of computations. In this paper, we propose a multi-vehicle tracking system with an adaptive predictor that employs recursive least square algorithm which can be easily implemented for real time application on a transversal filter. The performance of the proposed tracking system is compared to one with Kalman filter using a synthetic sequential image generated by computer graphics and real sequential image taken at intersections. Simulation results show that the proposed tracking system can be applied to track vehicles in real sequential image at the rate of 30 frame/sec on a PC environments without any special hardwares.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.217-223
• /
• 2015

This paper describes the design and implementation of a network system for UAV for multiple clients that enables long-range operation based on a commercial mobile network. A prototype data modem is developed with a commercial embedded M2M module in order to provide an access to the mobile network. A central server with a database is constructed to record all of real-time flight and video data and communicate with a ground control system. A GCS is developed for the central control, the single UAV and the smart phone version to be used for different purposes. Performance tests were progressed for data delay, video frame rate and state of clients. Flight tests were also performed to verify the reliability of the modem with respect to altitude.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.327-336
• /
• 2009

This paper analysis the STDMA protocol in aviation wireless data communications and carry out the performance analysis with simulation. The STDMA protocol that is currently being used in VDL Mode-4 has TDMA system characteristics, which provides time-division into several slots per one frame. The results of modeled STDMA protocol's data channel analysis show approximate 0.7 channel throughput at the transmission probabilities 0.045, 0.2, and 0.3 in the aspects of channel throughput. The delay time are 2.32434sec, 2.0293sec, and 2.12128sec respectively. These results shows the good stability in spite of variable transmission probabilities. Consequently, it is expected that STDMA protocol would be used properly for domestic communication demands and supervision system improvement by means of applying this to point-to-point communication and data/location broadcasting as a fundamental technology in CNS/ATM.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.485-490
• /
• 2007

The purpose in having a control rod on a buoy system is to control the motion of it. The system may be composed entirely of a single circular cylinder and a long mooring anchor cable. A control rod has one function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of the effects of mutual interference. then determine the stability characteristics of the body. In this paper, the study of control-rod-attached buoy's 2-dimensional section was accomplished. model tests and numerical simulations had been carried out with different diameters of control rods. and varying the Reynolds number $Re=5,000{\sim}25,000$ based on the cylinder diameter(D=50mm) to predict the performance of the body and the 2 frame particle tracking method Iud been used to obtain the velocity distribution in the flow field. 50mm circular cylinder Iud been used during the whole experiments and measured results had been compared with each other.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.66-73
• /
• 2015

In this paper, an architecture of a perpetual smart video device and its energy control model for the internet of things (IoT) are proposed. The smart video device consists of a processor, an image sensor, a video codec, and a network controller. In the proposed energy control model, energy consumed by image sensing, video encoding, and transmission and energy harvested by solar panels are defined as an input and an output of a battery, an energy buffer. Frame rate, quantization parameter, and operating frequency of processor are defined as the energy control parameters, and these parameters control the input and the output energy of the energy buffer, finally control the energy left in the battery. The proposed energy control model is validated by the energy consumption measurement of the smart phone based platform for various combinations of energy control parameters, and can be used for the design of perpetual smart video device.