• Title/Summary/Keyword: navigation bit

Search Result 123, Processing Time 0.021 seconds

Delayed Parallel Interference Cancellation for GPS C/A Code Receivers

  • Glennon, Eamonn P.;Bryant, Roderick C.;Dempster, Andrew G.
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.261-266
    • /
    • 2006
  • A number of different techniques are available to mitigate the problem of cross correlations caused by the limited dynamic range of the 10-bit Gold codes in the GPS C/A code. These techniques include successive-interference cancellation (SIC) and parallel-interference cancellation (PIC), where the strong signals are subtracted at IF prior to attempting to detect the weak signals. In this paper, a variation of these techniques is proposed whereby the subtraction process is delayed until after the correlation process, although still employing a pure reconstructed C/A code signal to permit prediction of the cross correlation process. The paper provides details on the method as well as showing the results obtained when the method was implemented using a software GPS receiver. The benefits of this approach are also described, as is the application of the method to the cancellation of CW interference.

  • PDF

Performance of Turbo Coded OFDM/FHMA Hybrid Systems in Impulsive Interference and Broadband Wireless Communication Channel (임펄스 간섭과 광대역 무선통신 채널에서 터보 부호를 적용한 OFDM/FHMA 하이브리드 시스템의 성능)

  • Kang, Heau-Jo
    • Journal of Advanced Navigation Technology
    • /
    • v.10 no.3
    • /
    • pp.213-218
    • /
    • 2006
  • In this paper, we analyzed the performance of orthogonal frequency division multiplexing/ frequency hopping multiple access(OFDM/FHMA) hybrid system that in impulsive interference and broadband wireless communication channel then we applied the turbo code scheme to make satisfied in data and voice transmission service. Also, we compared the bit error rate(BER) performance of turbo coded diversity scheme in the OFDM/FHMA hybrid system. As a result of simulation, proposed OFDM/FHMA hybrid system shows the enhancement of 10 times compared to the general OFDM/FHMA system.

  • PDF

Differential Fault Analysis on Symmetry Structured SPN Block Cipher (대칭구조 SPN 블록 암호 알고리즘에 대한 차분 오류 공격)

  • Lee, Chang-Hoon
    • Journal of Advanced Navigation Technology
    • /
    • v.17 no.5
    • /
    • pp.568-573
    • /
    • 2013
  • In this paper, we propose a differential fault analysis on symmetry structured SPN block cipher proposed in 2008. The target algorithm has the SPN structure and a symmetric structure in encryption and decryption process. To recover the 128-bit secret key of the target algorithm, this attack requires only one random byte fault and an exhaustive search of $2^8$. This is the first known cryptanalytic result on the target algorithm.

Effect and Performance Analysis of Multipath Environments on VDES Systems (다중경로 환경이 VDES 시스템에 미치는 영향 및 성능분석)

  • Ryu, Hyung-Jick;Kim, Hye-Jin;Kim, Wong-Yong;Park, Kae-Myoung;Kim, Jun-Tae;Yoo, Jin-Ho
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2019.05a
    • /
    • pp.19-21
    • /
    • 2019
  • In this paper, we introduce VDES system and multipath channel model for maritime wireless digital communication. And we studied the influence of multipath for bit-error ratio performance by computer simulation. Next we propose time-domain adaptive equalizer to treat the influence of multipath, and review the simulation result for necessity of applying the adaptive equalizer.

  • PDF

Design of a Software-Based GPS RF Simulator

  • Noh, Jae Hee;Jo, Gwang Hee;Bu, Sung Chun;Ko, Yo Han;Park, Chansik;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.11 no.2
    • /
    • pp.127-134
    • /
    • 2022
  • In this paper, a low-cost, flexible GPS simulator based on USRP is designed as a general-purpose software wireless front-end. The simulator consists of a software GPS signal generator and a USRP-based RF transmitter. The simulator supports various scenarios including specified reception time, quantization bit level, I/Q data types, IF frequency, sampling frequency, SNR, ionospheric delay and user dynamics. The generated GPS RF signal is verified using the spectrum analyzer and off-the-shelf GNSS receivers such as U-blox M8T. The experimental results shows that the difference between generated and real live signal is ignorable. It is expected that designed GPS simulator can be used to GNSS signal design, receiver design and signal processing algorithms such as anti-jamming.

Design of a High Dynamic-Range RF ASIC for Anti-jamming GNSS Receiver

  • Kim, Heung-Su;Kim, Byeong-Gyun;Moon, Sung-Wook;Kim, Se-Hwan;Jung, Seung Hwan;Kim, Sang Gyun;Eo, Yun Seong
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.4 no.3
    • /
    • pp.115-122
    • /
    • 2015
  • Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

Research on Fault Tolerant Avionics Memory Design through Multi Level Cell Flash Memory Reliability Analysis (멀티 레벨 셀 플래시 메모리 신뢰성 분석을 통한 항공 전자장비용 내결함성 메모리 설계 연구)

  • Jeong, Sang-gyu;Jun, Byung-kyu;Kim, Young-mok;Chang, In-ki
    • Journal of Advanced Navigation Technology
    • /
    • v.20 no.4
    • /
    • pp.321-328
    • /
    • 2016
  • Typical MLC NAND flash devices are considered less reliable than SLC NAND flash devices. Although raw bit error rate (RBER) of MLC flash had been considered approximately 1000times or more higher than that of SLC flash, recent research conducted on Google's data center shows that it is much lower than such expectation. Based on the research, we devised In Drive Data Duplication (IDDD) scheme that efficiently exploit MLC flash's sufficient capacity to improve its data reliability without structural complexity increment using SSD intrinsic firmware layer, and showed the data reliability expectation of MLC flash could be significantly higher than that of SLC flash from measured and calculated error rates. Even though RBER of SLC flash was lower than that of MLC flash in 44 out of 48 cases we studied, applying IDDD scheme, RBER of MLC flash was became lower than that of SLC in all 48 cases and uncorrectable bit error rate (UBER) of MLC flash was became lower than that of SLC flash in 45 out of 48 cases.

Improvement of Bit Error Rate through the Optimization of 320 Gbps WDM System with Non Zero-Dispersion Shifted Fiber (비영 분산 천이 광섬유를 갖는 320 Gbps WDM 시스템에서 최적화를 통한 비트 에러율 개선)

  • Lee, Seong-Real;Yim, Hwang-Bin
    • Journal of Advanced Navigation Technology
    • /
    • v.10 no.2
    • /
    • pp.103-113
    • /
    • 2006
  • The numerical methods of finding the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersions are proposed, which are able to effectively compensate overall channels in $8{\times}40$ Gbps WDM system with non zero-dispersion shifted fiber (NZ-DSF) as an optical fiber. And BER characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem but the condition in the case of applying the OPC into multi-channels WDM system.

  • PDF

Throughput Performance of Hybrid ARQ Ultra-Wideband Communication System for Wireless Packet Transmission (무선 패킷 전송을 위한 Hybrid ARQ 광대역 통신시스템의 처리율 성능)

  • Roh, Jae-Sung
    • Journal of Advanced Navigation Technology
    • /
    • v.11 no.3
    • /
    • pp.274-280
    • /
    • 2007
  • An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.

  • PDF

Influence of Extinction Ratio on Optimal Parameters of OPC for Improving BER of WDM Signals (WDM 신호의 BER 개선을 위한 OPC의 최적 파라미터에 대한 소광비의 영향)

  • Lee, Seong-Real;Kweon, Soon-Nyu
    • Journal of Advanced Navigation Technology
    • /
    • v.11 no.4
    • /
    • pp.437-446
    • /
    • 2007
  • In this paper, we numerically induced the optimal values of optical phase conjugator (OPC) position and dispersion coefficients of fiber sections, which can improve the bit error rate (BER) and design the adaptive WDM transmission system, as a function of the extinction ratio (ER) of 10 dB and 20 dB in $16{\times}40$ Gb/s WDM transmission system. It is confirmed that these optimal parameter values for effectively compensating overall WDM channels are dependence on the extinction ratio of signals as well as modulation format, transmitted channel numbers, which were investigated in previous researches. It is also confirmed that ER of 20 dB has the advantage of designing flexible WDM systems using optimal parameters than ER of 10 dB.

  • PDF