• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.599-605
• /
• 2003

For practical calculations, the Reynolds equation is frequently used to analyze the lubricating flow. The full Navier-Stokes Equations are used to find validity limits of Reynolds equation in a lubricating flow regime by result comparison. As the amplitude of wavy upper wall increased at a given average channel height, the difference between Navier-Stokes and lubrication theory decreased slightly : however, as the minimum distance in channel throat increased, the differences in the maximum pressure between Navier-Stokes and lubrication theory became large.

• 자원환경지질
• /
• 제52권4호
• /
• pp.291-297
• /
• 2019

단열을 통한 유체의 유동은 선형유동이 우세하다는 가정아래 Navier-Stokes 방정식에서 유도된 Stokes 방정식, Reynolds 식(또는 local cubic law), cubic law 와 같은 방정식을 이용하여 해석되고 있다. 하지만 이러한 방정식은 선형 흐름에 국한되며, 비선형 유동영역에 적용하게 되면 오류가 발생한다. 본 연구에서는 레이저 계측기를 이용하여 정밀하게 측정한 3차원 단열 자료와 Navier-Stokes 방정식과 Stokes 방정식을 지배방정식으로 한 수치모델링을 수행함으로써 비선형 유동이 일어나는 현상과 임계 레이놀즈수를 제시하였다. 레이놀즈수가 10이상이 되면 유속의 제곱에 비례하는 관성력이 점성력을 충분히 압도할 정도로 커지면서 지하수 유동이 선형영역에서 비선형 유동영역으로 전환되는 것으로 분석되었다. 이는 평균 간극과 거친 정도가 다른 두 단열에서 모두 동일하게 나타났다. 비선형 유동의 발생기작은 소용돌이 구조의 발생과 성장에 의한 것으로 알려져 있지만, 본 연구결과 단순히 소용돌이 구조가 비선형 유동을 일으키는 아니라 유속이 증가하면서 관성력의 영향이 훨씬 큰 영향을 끼치게 되어 비선형 유동이 발생하는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.755-761
• /
• 1987

본 연구에서는 익형 위에 발생하는 박리기포 주위를 사용한 박리기포 주위 유 동해석에 목적을 두고, 원시변수(primitive variable)를 사용한 부분 포물형 Navier -Stokes 방정식을 사용하여 층류유동에 관한 간단한 기본계산을 통해 비교적 박리기포 가 큰 외부유동(external flow)에도 부분 포물형 방정식이 적용될 수 있음을 보이고자 한다.수치해법은 Galpin 등 이 이차원 관유동(channel flow)에 완전 Navier-Stokes 방정식의 해법으로 사용한 CELS(coupled equation line solver) 방법을 부분 포물형 방정식에 적합하게 수정하여 사용하였다.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.15-20
• /
• 1998

An integrated computing system has been developed for a Navier-Stokes design procedure of an axial-flow compressor blades. The process is done on the four separate steps, i.e., determination of the basic profiles, generation of computational grids, cascade flow simulation and analysis of the computed results in design sense. Applications are made to the blade design of the LP compressor. Computational results are analyzed with respect to the flow-field characteristics and are compared with the expected design requirements. The present system are coupled with the design procedure of the turbomachinery blades using the Navier-Stokes technique.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.313-324
• /
• 1992

Two-dimensional Navier-Stokes code has been developed for analysis of turbomachinery blade rows and other internal flows. The Navier-Stokes equations are written in a Cartesian coordinate system, then mapped into a generalized body-fitted coordinate system. All direction of viscous terms are incorporated and turbulent effects are modeled using the Baldwin-Lomax algebraic model. Equation are discretized using finite difference method on the C-type grids and solved using implicit LU-ADI decomposition scheme. Calculations are made at a VKI turbine cascade flow in a transonic wind-tunnel and compared to experimental data. Present numerical scheme is shown to be in good agreement with the previous experimental results and simulates the two-dimensional viscous flow phenomena.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.169-175
• /
• 2000

A design method for transonic turbine blades is developed based on Navier-Stokes equations. The present computing process is done on the four separate steps, 1.e., determination of the blade profile, generation of the computational grids, cascade flow simulation and analysis of the computed results in the sense of the aerodynamic performance. The blade shapes are designed using the cubic polynomials under the control of the design parameters. Numerical methods for the flow equations are based on Van-Leer's FVS with an upwind TVD scheme on the finite volume. Applications are made to the VKI transonic rotor blades. Computed results are analyzed with respect to the aerodynamic performance and are compared with the experimental data.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.54-61
• /
• 2015

In the present study, a flow solver using a kinetic BGK scheme was developed for the compressible Navier-Stokes equation. The kinetic BGK scheme was used to simulate flow field from the continuum up to the transitional regime, because the kinetic BGK scheme can take into account the statistical properties of the gas particles in a non-equilibrium state. Various numerical simulations were conducted by the present flow solver. The laminar flow around flat plate and the hypersonic flow around hollow cylinder of flare shape in the continuum regime were numerically simulated. The numerical results showed that the flow solver using the kinetic BGK scheme can obtain accurate and robust numerical solutions. Also, the present flow solver was applied to the hypersonic flow problems around circular cylinder in the transitional regime and the results were validated against available numerical results of other researchers. It was found that the kinetic BGK scheme can similarly predict a tendency of the flow variables in the transitional regime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.597-602
• /
• 2000

In a MEMS(micro-electro mechanical system), the fluid may slip near the surface of a solid and have a discontinuous temperature profile. A numerical prediction in this slip flow region can provide a reasonable guide for the design and fabrication of micro devices. The compressible Navier-Stokes equation with Maxwell/smoluchowski boundary condition is solved for two simple systems; couette flow and pressure driven flow in a long channel. We found that the couette flow could be regarded as an incompressible system in low speed regions. For the pressure driven flow system, we observed nonlinear distribution of pressure in the long channel and numerical results showed a good agreement with the experimental results.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.7-13
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as pump, turbine, nozzle, Infector, etc. In the present work, a solver for two-phase flows has been developed and applied to simulate the cavitating flows past hydrofoils. The governing equation is the two-phase Navier-Stokes equation, comprised of the continuity equation of liquid and vapor phase. The momentum and energy equation is in the mixture phase. The solver employs an implicit, dual time, preconditioned algorithm using finite difference scheme in curvilinear coordinates. An experimental data and other numerical data were compared with the present results to validate the present solver. It is concluded that the present numerical code has successfully accounted for two-phase Navier-Stokes model of cavitation flow.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.38-42
• /
• 1997

A multiblock grid generation has been applied to a Navier-Stokes design procedure of a axial-flow compressors. A multiblock structure simplifies the creation of structured H-grids about complex turbomachinery geometries and facilitate the creation of a grid in the tip flow region. The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The input module is made of the results of the preliminary design, i.e., flow-path, aerodynamic conditions along the spanwise direction, and the blade profile data. The final grids generated from each module of the system are used as the preprocessor for the performance prediction of the sectional blade, the blade-stacking process and the three-dimensional flow simulation inside the blade passage. Application to the blade design of the LP compressor was demonstrated to be very reliable and practical in support of design activities. This customized system are coupled strongly with the design procedure of the turbomachinery cascades using the Navier-Stokes technique.