• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.95-104
• /
• 2010

The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.19-32
• /
• 2021

In the present experimental study, the high performance hybrid fiber reinforced concrete (HPHFRC) is prepared using the Modified Andreasen and Andersen (A&A) particle packing model. Total of 16 trial mixes of HPHFRC with Indian standard sand (SS) and natural river sand (NS) are prepared to achieve the selection criteria (flow percent>150 and compressive strength>80 MPa). Based on the flow percent and compressive strength criteria, the selected mixes evaluated to study the effect of usage of natural river sand (NS) and the expensive Indian standard sand (SS) on the mechanical, durability, and microstructure property of designed HPHFRC. It has been found that the Modified A&A model is reliable to design the mix for HPHFRC with excellent mechanical, durability, and microstructure properties. In addition to that, a moderate difference in the mechanical and durability properties of NS contained HPHFRC and SS contained HPHFRC is found. Based on the obtained results of NS contained HPHFRC, it can be concluded that the use of natural river sand (NS) can be successfully adopted for the production of HPHFRC, resulted in a reduction of the production cost without compromising the excellent performance of HPHFRC.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.617-623
• /
• 2017

This work is conducted with the aim of using waste material to reserve the natural resources. The objective is accomplished by conducting experimentation and verify by modeling based on fuzzy logic. In experimentation, concrete is casted by using natural/river sand as fine aggregate and termed as control specimen. Natural sand is conserved by replacing it with used foundry sand (UFS) by an amount of 10, 20 and 30% by weight. Fresh and hardened properties of concrete are investigated at different ages. It is observed that compressive strength and modulus of elasticity reduced with the increase in amount of UFS. Furthermore, concrete compressive strength is predicted by using fuzzy logic model and verified at different replacement ratio and age with experimental observations.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.45-52
• /
• 1999

It is difficult to keep the balance of supply and demand for natural aggregates in recent years, because natural resources have become to be almost exhausted. Crushed stone is already used for coarse aggregate instead of river gravel at present. Now, crushed sand or sea sand should be used for fine aggregate, because natural sand also has been exhausted with a few exceptions around Nakdong River. The sea sand has a lot of problems which are the corrosion of reinforcement bars, the investment of facility for cleansing salt and the cost increase due to the insufficiency of industrial water. Therefore, it is necessary to produce and to utilize the crushed sand very actively, but some material properties which are related to water absorption, strength and chemical durability, prevent from determining the generalized criteria because its rocks make much differences in its physical and chemical characteristics. In this paper, fundamental physical properties of crushed sand, which comes from Daegu Subway construction fields, have been investigated for the usability on basic material of concrete. The optimum replacement ratio and the strength estimation method of crushed sand replacing natural sand also have been presented here through the compressive strength test of ready-mixed concrete cylinders.

• 한국농공학회지
• /
• 제44권2호
• /
• pp.107-116
• /
• 2002

The amount used of aggregates for concrete is increasing rapidly since the mid-1980s in Korea. The natural gravels from river are already displaced with crushed stone, and use of crushed sand as a substitute of natural river sands, also, is getting increased day by day. This paper is presented fur analysis on mechanical properties of high strength concrete using fly ash and crushed sand. The material functions in mixing design of concretes are various water-cement ratios(w/c) such as 0.25, 0.40, 0.55 and different replacement ratio of crushed sand to natural sands such as 0%, 20%, 40%, 60%. As a results, it has been shown that compressive strengths of concretes with W/C lower than 0.40 and 0.25 are higher than 400 kgf/$\textrm{cm}^2$ and 600 kgf/$\textrm{cm}^2$ respectively. It is also concluded that the results of rapid chloride permeability tests of concrete are evaluated to negligible. The conclusions of this study is that it is possible to use fly ash and crushed sand fur high strength concrete.

• 산업기술연구
• /
• 제21권A호
• /
• pp.285-292
• /
• 2001

The amount used of aggregates for concrete is increasing rapidly since the mid-1980s in Korea. The natural gravels from river are already displaced with crushed stone, and use of crushed sand as a substitute of natural river sands, also, is getting increased day by day. This paper is presented for mixture of high strength concrete using crushed sands. Mixing design of concretes are various water-cement ratios(w/c) such as 25%, 40%, 55% and different replacement ratio of crushed sands to natural sands such as 0%, 20%, 40%, 60%. As a results, it has been shown that compressive strength of concretes with w/c lower than 40% and 25% is higher than $400kgf/cm^2$ and $600kgf/cm^2$ respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.459-462
• /
• 2005

Recently, interest grew on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Moreover, the most sensitive aspect highlighted by the unstability of aggregate supply is the quality. The extreme insufficiency of quality criteria about the materials currently used as substitute aggregates and about concrete mixed with such materials is also critical. This study investigated influence of qualities of concrete which is using mixed crushed sand and natural sand

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.76-82
• /
• 1997

Recently as the development of a large-scale ocean structure or ocean is in progress, the importance of underwater concrete construction came to the fore. However, a problem with this underwater concrete construction is the segregation of cement and aggregate occurs when concrete is poured into the underwater. However, recently as an adhesiveness of the constituents of fresh concrete is increased even in our country, antiwashout concrete admixture were developed. The antiwashout concrete admixture can reduce the segregation significantly. Although this antiwashout underwater concrete is superior to the traditional underwater concrete in terms of durability, watertightness, stability, etc. But it is still unsatisfied due to the lack of criterion or construction experiences. Furthermore, because of an insufficiency of natural aggregate, the development of replacing aggregate came to be necessary. Accordingly, the purpose of this study is to investigate the feasibility of sea sand as a replacing aggregate and the characteristic change of antiwashout underwater concrete using river sand, sea sand, and blended sand (river sand:sea sand=3:7) through experimental researches.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.459-467
• /
• 2006

최근 하천골재의 부존량 감소와 건설수요의 증가로 양질의 모래가 고갈되었고, 바닷모래와 같이 자연상태에서 얻을 수 있는 골재도 그 품질이 저급화되면서 골재의 품질에 대한 관심을 갖게 되었다. 따라서 잔골재를 바닷모래에만 지나치게 의존하고 있는 공급원의 편중을 다양화할 필요가 있으며, 바닷모래를 대체할 수 있는 골재원을 하루빨리 발굴할 필요가 있다. 한편 국내 건설현장에는 다양한 잔골재가 콘크리트에 사용되고 있으나, 이런 잔골재가 콘크리트에 미치는 영향에 대해 체계적으로 검토한 연구가 거의 없다. 따라서 본 연구에서는 최근 국내 건설현장에서 비교적 많이 사용되고 있는 잔골재가 콘크리트의 품질에 미치는 영향을 검토할 목적으로 잔골재 종류가 굳지 않은 콘크리트의 물성 및 경화된 콘크리트의 강도에 미치는 영향을 분석하였다. 그 결과, 부순모래는 바닷모래 및 강모래와 같은 천연골재에 비해 콘크리트의 유동성과 공기 연행성을 저하시키거나 블리딩을 증가시키고, 특히 입도 입형이 불량한 부순모래를 사용한 경우에는 더욱 콘크리트의 물성이 저하되는 것으로 나타났다. 그리고 W/C 55%, 45%에서 잔골재 종류가 강도에 미치는 영향은 거의 없으나, W/C 35%에서 부순모래는 천연골재에 비해 강도를 저하시키는 것으로 나타났다. 또한 입도 입형이 불량한 부순모래를 천연골재와 혼합하여 사용하는 경우에는 굳지 않은 콘크리트의 특성을 향상시키며, 강도에도 나쁜 영향을 미치지 않는 것으로 분석되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.365-368
• /
• 2008

최근, 하천에서 얻을 수 있는 자연모래의 부족과 환경 보호에 대한 요구 등으로 인해 잔골재로써의 부순 모래가 콘크리트 산업에서 사용이 증가되고 있다. 골재는 자기충전 모르타르(SCM)를 포함한 자기 충전 콘크리트(SCC)의 특성에 큰 영향을 준다. 잔골재로 부순 모래를 사용한 SCC와 SCM의 유동적 특성을 자연 모래를 사용한 것과 두 가지를 섞은 모래를 사용한 SCC와 SCM과 비교 하였다. 실험결과는 50% 섞인 모래가 포함된 SCM의 yield stress가 SP 함유량에 따른 자연 모래와 부순 모래보다 높다는 것을 보여준다. 자연모래 SCC의 슬럼프 값은 부순 모래의 SCC보다 거의 5-15% 높다. 또한 같은 물/시 멘트비와 증점제에서 자연모래 SCC의 L-box test 값은 부순 모래 SCC보다 거의 20-30% 높다.