• 자연과학논문집
• /
• 제5권1호
• /
• pp.67-75
• /
• 1992

결정성 aluminosilicate 광물의 일종인 천연 zeolite는 광물학적 특성과 화학적 표면활성으로 인하여 다방면의 공업화학적 이용가치가 매우 높고 광물중 특히 가장 높은 양이온교환능을 가지고 있어 기체분자에 대한 선택적 흡착력이 큰 molecular sieve로써 흡착분리제로는 물론, 건조제, 흡습제, 이온교환체, 촉매, 증량제 그리고 폐수처리제, 경수의 연화제등으로 이용도가 날로 증가하고 있다. 국내산 천연 zeolite를 IN HCL용액과 NaCl용액으로 화학처리하여 다공성을 증가시켜 column충전제로 사용한 결과, 혼합기체 Ar, $N_2$ CO및 $CH_4$의 분리특성에 관해서 HCL용액으로 처리한 mordenite 시료는 활성화온도가 $300^{\circ}C$일 경우, CO와 $CH_4$의 분리는 곤란하나 $350^{\circ}C$에서는 분리가 용이하였고 NaCl용액으로 처리한 시료는 미처리한 것과 거의 유사하였다. Ar과 $N_2$와의 분리에는 산 또는 알칼리로 화학처리한 시료에도 별로 효과가 없었으나 HCL용액과 NaCl용액을 연속적으로 처리한 천연 zeolite는 합성 zeolite의 특성에 견줄만한 정도로 기체분리효과와 HETP값을 보여주었다. 한편 시료의 화학처리에 의한 Ar과 CO의 흡착열의 변화는 극성기체인 CO의 경우, 별로 변화가 없지만 무극성기체인 Ar은 영향을 받기가 용이하였다. 또한 carrier gas He의 유속이 대략 20~30ml min범위일때 최소의 HETP값을 가지며 column의 효능이 좋았다.

• 한국석유지질학회지
• /
• 제14권1호
• /
• pp.45-52
• /
• 2008

천연가스로부터 청정연료인 합성유를 제조하는 GTL기술은 1920년대 군수의 목적으로 독일의 Fisher와 Tropsch에 의해서 석탄으로부터 합성유를 제조하는 기술의 필요에 의해 처음으로 개발되었다. 이후, 1960년대 인종차별로 인한 정치적 고립으로 석유수급이 어려웠던 남아프리카공화국의 수송용 연료의 필요에 의해 Sasol사에서 본격적으로 FT(Fisher-Tropsch) 합성기술을 상용화하기 시작했다. 최근까지도 저렴한 석유자원으로 인해 GTL기술이 원유 정제기술로부터 얻어지는 석유제품에 비해 경제성을 확보하지 못하여 본격적인 상업화가 지연되어 왔으나, 에너지 자원의 수급 및 기타 경제적, 환경적 변화로 인해 GTL사업에 대한 관심이 고조되고 있으며 보유 석유자원이 한계에 다다라 상대적으로 풍부한 천연가스의 석유화를 목표로 하고 있는 카타르를 중심으로 GTL플랜트 건설이 추진되고 있다. 천연가스를 원료로 석유제품(디젤 및 나프타, 윤활기유 등)을 만드는 GTL기술은 크게 3가지 공정으로 구분되는데, 천연가스에서 수소와 일산화탄소를 제조하는 합성가스 제조공정(Synthesis Gas Generation), 합성가스를 FT합성반응에 의해 고분자 선형탄화수소로 전환시키는 FT합성공정(FT Synthesis)과 FT합성유로부터 석유제품을 만드는 개질공정(Product Upgrading)으로 구성된다. 생산된 제품은 유황 및 질소화합물 등을 적게 함유하고 있고, 정유플랜트 연료보다 방향족성분이 적어, 연소 시 인체에 해로운 물질을 적게 생산하는 청정연료이며, 천연가스를 저온 액화하는 LNG사업에 비하여 운송이 용이하고 안정성이 높다는 장점을 가지고 있다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.180-183
• /
• 2004

Gas separation membranes are now used in a wide variety of application areas as oxygen enrichment, hydrogen recovery, acid gas treatment, and natural gas dehydration etc [1]. Since polymeric membranes offer attractive properties for gas separation application, they have been variously studied [2-4].(omitted)

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.944-949
• /
• 2006

An infiltration was realized as an important part of ventilation to change fresh air with contaminated air in a house. In this study, it was measured the infiltration in new apartment buildings according to Seasons, height etc. We measured the infiltration by using tracer gas method and did for 24hours. To quantify the infiltration, Sulfur Hexafluoride($SF_6$) gas was used. The Constant Concentration was conducted during experimental process and the concentration of the gas was measured with a gas monitor. In the results of the measurement, the infiltration were appeared over 0.6 ACH in winter and about 0.2 ACH in summer and autumn. Also the infiltration were measured more highly at high and low stories than middle stories in winter.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.569-581
• /
• 2020

Since the dehydration packages of offshore plant deal directly with oil & gas, there is a great risk of fire and explosion during operation. Therefore, this study performed risk assessment through HAZard & OPerability (HAZOP) for solid desiccant dehydration package that can remove water component of natural gas in offshore floating liquefied natural gas (LNG) production facilities below 0.1 ppmv. The risk matrix was determined by dividing the likelihood and the severity into five levels separately by asset, life, environment and reputation. The piping & instrumentation diagram (P&ID) of the dehydration package was divided into 9 nodes. Total 22 deviations were assessed in consideration of the adsorption and desorption conversion cycle. A risk assessment based on deviations revealed 14 major hazards. Three representative types of hazards were open/close failure of the control valve, control failure of the heater, and abnormal operation of the regeneration gas cooler. Finally, we proposed the installation of additional safety devices to improve safety against these major hazards, such as safety instrumented functions, alarms, etc.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.405-410
• /
• 2020

In this literature, we are introduce a basic design of multi energy hub based on natural gas governor station. Multi energy hub consists of turbo expender generator, phosphoric acid fuel cell, pressure swing adsorption, H₂ charging station, utilities and etc. We design a hybrid energy hub system that provides energy using these complex energies, and calculates the amount of electricity that can be produced and the amount of hydrogen charged through the process analysis. TEG and phosphoric acid fuel cell produce 2,290 to 2,380 kW and can supply electricity to 500 houses. In addition, By-product H₂ gas is refined to H₂ vehicle fuel. This will help maximize the balance of energy demand and supply and improve national energy efficiency by integrating unused decompression energy power generation technology and various power generation/heat source technologies.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.511-514
• /
• 2007

Gas hydrate has a unique property that can store a large volume of gas in water as a solid form. Even though investigations for natural gas storage technology have been carried out for several decades, there are still a lot of unsolved problems due to complex formation process, low formation speed, high energy consumption and so on. So, lots of experiments were conducted to overcome these weaknesses and to develop artificial NGH formation technology applicable to industrial-scale storage and commercial transport. In this study, some series of experiments were performed to analyze both stirred and unstirred system especially about the influences of several gas hydrate formation factors such as agitation speed, system temperature, SDS concentration, etc. As a result, optimum range of SDS concentration and temperature that could enhance the storage capacity and shorten the formation time were found. And it is obviously presented that SDS such a kind of surfactant promotes gas hydrate formation dramatically and the quantity of stored gas are proportional to agitation speed in stirred system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.533-536
• /
• 2009

The gasification technology is a very flexible and versatile technology to produce a wide variety products such as electricity, steam, hydrogen, Fisher-Tropsch(FT) diesels, Dimethyl Ether(DME), methanol and SNG(Synthetic Natural Gas) with near-zero pollutant emissions. Gasification converts coal and other low-grade feedstocks such as biomass, wastes, residual oil, petroleum coke, etc. to a very clean and usable syngas. Syngas is produced from gasifier including CO, $H_2$, $CO_2$, $N_2$, particulates and smaller quantities of $CH_4$, $NH_3$, $H_2S$, COS and etc. After removing pollutants, syngas can be variously used in energy and environment fields. The pilot-scale coal gasification system has been operated since 1994 at Ajou University in Suwon, Korea. The pilot-scale gasification facility consists of the coal gasifier, the hot gas filtering system, and the acid gas removal (AGR) system. The acid gas such as $H_2S$ and COS is removed in the AGR system before generating electricity by gas engine and producing chemicals like Di-methyl Ether(DME) in the catalytic reactor. The designed operation temperature and pressure of the $H_2S$ removal system are below $50^{\circ}C$ and 8 kg/$cm^2$. The iron chelate solution is used as an absorbent. $H_2S$ is removed below 0.1 ppm in the H2S removal system.

• 한국가스학회지
• /
• 제13권3호
• /
• pp.54-60
• /
• 2009

산업의 발달에 따른 영향으로 에너지수요가 증가함에 따라 국내에는 에너지 산업시설(저장시설, 고압가스 배관, 충전소, 탱크로리 등)이 전국에 산재하게 되었고 사용하는 에너지의 종류도 과거 한정된 자원이 아닌 다양한 에너지원을 사용하게 되었다. 이러한 에너지시설에는 화재, 폭발 및 유독물질 누출 등 중대사고가 발생할 수 있다. 더욱이 국내의 에너지시설은 밀집되어 있어 연쇄적인 사고가 일어날 가능성이 존재한다. 이 연구에서는 기존에 설치 운영되고 있는 LPG(liquefied petroleum gas) 및 가솔린(gasoline) 충전소와 LNG(liquefied natural gas) 충전소에 대한 피해예측을 실시하고 이를 비교 분석 함으로써 국내에서 처음 시도되고 있는 가솔린 주유소 및 LPG/LNG 충전소가 병설되어 설치되는 경우의 안전성을 검토하고자 한다.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.40-47
• /
• 2010

Calorific value of mixed gas, like liquefied natural gas (LNG), is strongly depends on its compositions which are affected by the mining place and producing time. The variation in calorific value have an direct influence on the combustion characteristics and performances of boiler, burner, vehicle, power plants etc. Thus, developing experimental method to measure exact calorific value is becoming an issue in the related industrial fields. Flame calorimeter is developed to get calorific value at the dynamic equilibrium state using electric substitution method. Refrigerant-11 carries heat from combustor and/or heater to the Peltier elements which pumped it out to the cooling water. It is found out that error in the measured calorific value of methane is 2.86% compared with the theoretical one. Developed design technique and the experimental data will be applied to design the national standard gas calorific value measuring apparatus.