• Journal of the Mineralogical Society of Korea
• /
• v.25 no.2
• /
• pp.77-84
• /
• 2012

Anatase, one of the $TiO_2$ polymorphs, is known to show different phase transition paths depending on its crystalline and shape. Particle size of 15~25 nm anatase has been subjected to high-pressure Raman spectroscopy and X-ray diffraction studies using a diamond anvil cell. We observe that the starting sample transforms to an amorphous phase above approx. 20 GPa, which is retained upon pressure release to ambient condition. This is in contrast to previously established transition to baddeleyite phase and we suspect difference in the particle distribution state trigger phase instability of nanoparticles and hence amorphization.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.249-257
• /
• 2005

Garnet is one of the major minerals down to the top of lower mantle approximately 660 km with spinel and pyroxenes. Garnet transforms into perovskite and corundum in the lower mantle, however its sequence is still in controversy. We measured the compressibility of a natural almandine at high-pressure up to 62 CPa using Mao-Bell type diamond anvil cell (DAC) at room temperature. Chemical formula of the specimen is ($Fe_{2.52}Ca_{0.21}Mg_{0.18}Mn_{0.12})Al_{2.23}Si_{2.97}O_{12}$. Results of this compression study are as follows: a : $10.175\;{\AA}$, V : $1251.16\;{\AA}^{3}$, $D_{x}$ : $5.265\;g/cm^{3}$ at 62 GPa; bulk modulus is 156 GPa using Birch-Murnaghan equation of state (EoS) with a fixed $K_{0}\;'$ of 4. This study would be the first time attempt accomplished with the high pressure DAC using synchrotron radiation at the Pohang Light Source (PLS) in Korea.

• Korean Journal of Organic Agriculture
• /
• v.18 no.4
• /
• pp.559-571
• /
• 2010

This study carried out to evaluate toxicology of Chrysanthemum cinerariaefolium and Melia azedarach against natural enemies in the laboratory, and the diamond backmoth, Plutella xylostella, on chinese cabbage. In the evaluation of the toxicity on predatory mite of phytoseiid Phytoseiulus persimilis, Hypoaspis aculeifer, Amblyseius cucumeris, A. wormersleyi, A. swirskii, the two plant extracts were classified into moderate selective toxicity as recommended by international organization of biocontrol (IOBC). The mummies parasitic natural enemies, Trichogramma evanescens, Aphidius ervi, Aphidius colemani, Eretmocerus eremicus, Encarsia formosa were found to be relatively safe to the plant extracts except Eretemocerus eremicus. In the field study for the control of diamondback moth, Plutella xylostella, single spray of C. cinerariefolium indicated that the control effect dropped from 21th days after the spraying. In the 3 times of spray with 7 says intervals, the mortality effect low at the beginning, but increased to 91.1 at 21 days after spraying. Single spray of M. azedarach showed a 96.7% mortality on P. xylostella at 14 days after spraying, and thereafter decreased. In the three times of spray with 7 days intervals of M. azedarach, the mortality of P. xylostella was 100% at 14 days and its effect was maintained to 28 days after treatment. Consequently, it was suggested that M. azedarach be sprayed before C. cinerariaefolium application.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.325-332
• /
• 2015

Apophyllite (KF)($K_{0.84}Ca_{3.99}Si_{7.70}O_{20}F_{0.72}{\cdot}8H_2O$), one of the sheet silicates, was compressed up to 7.7 GPa at ambient temperature and 15 high pressure data were obtained. Lattice parameters of the starting specimen were as follows: $a_0=8.954(2)\;{\AA}$, $c_0=15.795(2)\;{\AA}$, $V_0=1266.4(4)\;{\AA}^3$. Symmetrical diamond anvil cell was employed with synchrotron radiation in the mode of angular dispersive X-ray diffraction. Bulk modulus was determined to be 59(4) GPa when ${K_0}^{\prime}$ is 4. No clear first order phase transition symptom was observed in the series of XRD pattern. However, second-order phase transition cannot be ruled out from the correlation between normalized pressure and strain.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.128-135
• /
• 1995

Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.245-249
• /
• 2005

Various surgical procedures have been described for treating osmidrosis axillare. Elimination of the apocrine glands is prime goal. Optimal operative procedure is characterized as follows: minimal axillary scar(which has cosmetic merits), less complications such as hematoma and seroma, short and less painful recuperating period, minimal damage to the skin and low recurrence rate. Three types of incision technique in subdermal shaving method have beeb commoly used. First, single incision method has an advantage of minimal scarring but more recurrence due to incomplete removal of apocrine glands may occur. Second, double incision technique(Bipedicled flap) has advantages of complete excision, low recurrence rate and relatively minimal scarring, but it could cause frequent necrosis of skin and folding of skin flap. Skoog's method is the third method, which makes four flaps by offset cruciate incisions. It is a better technique in aspect of complete excision of apocrine glands and low recurrence rate but has disadvantages such as development of hypertrophic scar or scar contracture in the line that lies perpendicular to natural axillary skin crease. We used a modified procedure which has shorter length in vertical and transverse incision compared with the classic Skoog's method. We dissected further subcutaneous tissue through the diamond-shaped incision and utilize wide operation field that provide adequate excision of subdermal tissue and proper hemostasis. Between 1999 and 2004, we operated 160 osmidrosis axillare in 80 patients in this technique. Most patients obtained satisfactory result with very low complications. Hematoma or seroma 3.1% Infection 0.6% Partial wound disruption 10% Recurrence 1.2%. Modified Skoog's method for treating osmidrosis axillae could be a optimal technique providing wide operation field for adequate excision of apocrine glands and proper hemostasis and leaving relatively inconspicuous scar and low incidence of scar contracture.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1026-1030
• /
• 2009

Western wedding ceremony is generalized and it has been focused on bride's wedding dress and jewelry design as coming in western culture in Korea. Especially, metal design has developed a lot as enlarging the scale of jewelry market but study of gem cutting design is insufficient really. To meet demands of consumers of the 21th century we try fancy not standardizing style gems by using new faceting technique to maximize brilliance as wedding jewelry. In this thesis, we use popular and moderate priced synthetic cubic zirconia(CZ) which is able to alternate expensive diamond and natural gems to make easy approach of consumer as main gem material of wedding jewelry. And we develop various gem cutting design that is used synthetic cubic zirconia(CZ). We will contribute to development of new wedding jewelry design proposing various gems cutting style fitted for gem setting technique of wedding jewelry.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.3
• /
• pp.83-91
• /
• 2017

In-situ high-pressure and ex-situ high temperature-pressure experiments of natural beryl ($Be_3Al_2Si_6O_{18}$, P6/mcc) from two different localities (beryl-A and beryl-B) were studied using pure water as pressure transmitting medium. Compared to the previous study using a mixture of methanol:ethanol medium in 4 : 1 by volume, pressure- and temperature-induced chemical and structural changes under water medium are expected to be different. The derived bulk moduli are 111(7) GPa, $K{_0}^{\prime}=73(7)$; 110(9) GPa, $K{_0}^{\prime}=65(8)$ for beryl-A and beryl-B, respectively. We observe densifications in volume compression, which appear to be attributed to the phase transitions of water to ICE VI and ICE VII around 1.0 GPa and 2.5 GPa, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.235-240
• /
• 2013

Pure-carbon materials such as graphite, graphene, carbon nanotubes, and diamond have very high thermal conductivities. The reported thermal conductivity of graphene is in the range 3000~5000W/m-K at room temperature. Here, we developed graphene/cu foam hybrid type heat spreader to obtain higher thermal conductivity than Cu foam. Hybrid materials were characterized using optical microscopy (OM), scanning electron microscopy (SEM) and thermal conductivity measurement system; LFA (Laser Flash Analysis @ LFA 447, NETZSCH). We suggest that excellent thermal properties of graphene/cu foam hybrid structures are beneficial for all proposed electrical applications and can lead to a thermal management application.

• Economic and Environmental Geology
• /
• v.49 no.1
• /
• pp.23-30
• /
• 2016

Powder samples of natural lawsonite (Ca-lawsonite, $CaAl_2Si_2O_7(OH)_2{\cdot}H_2O$) was studied structurally up to 8 GPa at room temperature using monochromatic synchrotron X-ray powder diffraction and a diamond anvil cell (DAC) with a methanol : ethanol : water (16 : 3 : 1 by volume) mixture solution as a penetrating pressure transmitting medium (PTM). Upon pressure increase, lawsonite does not show any apparent pressure induced expansion (PIE) or phase transition. Pressure-volume data were fitted to a second-order Birch-Murnaghan equation of state using a fixed pressure derivative of 4 leading to a bulk modulus ($B_0$) of 146(6) GPa. This compression is further characterized to be isotropic with calculated linear compressibilities of ${\beta}^a=0.0022GPa^{-1}$, ${\beta}^b=0.0024GPa^{-1}$, and ${\beta}^c=0.0020GPa^{-1}$.