• 공업화학
• /
• 제18권5호
• /
• pp.459-466
• /
• 2007

본 연구에서는 다양한 금속들이 담지된 H형 베타 제올라이트(BEA)를 황성분 함유 부취제 제거용 흡착제로 활용하였다. 단일 금속이 담지되거나 또는 두 종류의 금속이 복합적으로 함유된 여러 종류의 흡착제를 사용하여 연속적인 흡착층에서 THT와 TBM 부취제에 대한 개별적 혹은 경쟁적인 흡착 특성을 평가하였다. 순수한 H형 BEA 제올라이트는 TBM 화합물에 대하여 가장 높은 흡착능력을 나타내었으며, THT 부취제는 Fe, Pd 금속 및 ZnO를 함유한 HBEA상에서 더 많은 양으로 흡착 제거되었다. 복합금속함유 흡착제의 경우에는 Cu-Zn/HBEA와 Fe-Mo/HBEA가 TBM 부취제에 대하여 더 높은 흡착용량을 나타내었다.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• 공업화학
• /
• 제9권2호
• /
• pp.278-285
• /
• 1998

배출가스중의 $SO_2$ 제거를 위하여 다양한 금속산화물로 구성된 천연망간광석, 철광석, $CuO/{\gamma}-A1_2O_3$ 등을 흡착제로 사용하여 고정층반응기에서 흡착용량실험을 하였다. 또한 흡착제중 흡착용량이 떨어지는 철광석을 제외한 두 가지 흡착제를 이용하여 유동층반응기에서 유속, 온도, 입자크기 등의 조업조건에 따른 $SO_2$ 흡착실험을 수행하였다. 모든 흡착제에서 온도가 증가할수록 흡착량이 증가하는 화학흡착반응을 보였고 유동층반응기에서 $U_o/U_{mf}$ 및 $U_o-U_{mf}$와 같은 유속조건에 따라 입자 크기에 따른 흡착량의 변화가 다르게 나타났으며 유동층반응기 성능식으로부터 반응속도상수를 얻었다. 이 실험을 통하여 천연망간광석이 유동층반응기에서 $SO_2$ 흡착제로의 사용가능성을 확인할 수 있었다.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.138-144
• /
• 2001

This study was carried out to investigate characteristics and Pb(II) removal effect of natural clays in the batch mode test. The effect of parameters such as temperature, adsorption time and coexisting cations on the sorption ability and characteristics was investigated to find out whether the clays could be used as adsorbents. Several natural clays from domestic have been investigated to have high specific surface area and have minerals such as SiO$_2$ and $Al_2$O$_3$. As a result, removal effects of Pb(II) on clays were reached at equilibrium in aqueous solutions by stirring about 20 minutes. The removal effect of Pb(II) was best for Kang Jin clay than other clays in terms of fixed time. Adsorption efficiency was not influenced by the possibility of continuous treatment system of wastewater which contain heavy metals by using natural clays from domestic.

• 한국의류학회지
• /
• 제13권2호
• /
• pp.128-136
• /
• 1989

In order to investigate a practical application of fibrous adsorbents to heavy metal ions, amidoxime fibers, as a particular class of solid chelate agents, were prepared by hydroxylamine treatment for acrylic fibers in a recipe of neutralization. Among the important problems from plant effluents are toxic concentrations of heavy metals such as copper. Accordingly, the properties of Cu (II) adsorption and its chelates were studied. The results obtained are as follows; The fibrous adsorbents have the property of increasing the swelling volumes by amidoximation. The adsorption of Cu (II) ion is characterized by an endothermic reaction, which is estimated as the plus values in the enthalpy change ($\delta$H=1.30 Kcal/mol. and 3.14 Kcal/mol.). The Cu (II) ions are adsorbed in the range of pH $3\~8$ and the maximum adsorptions are occurred about pH 8. Owing to the anions $(NO_3^-,\;Cl^-)$ of copper salts, amidoxime fibers form 1:1 and 2:1 (ligand: metal) chelating complexes with Cu (II). The nitrate anion chelates to amide I (NH) of amidoxime groups and the chlorine anion does to nitrosyl (NO). These effects relate to the crystallization of the complex and the thermal property.

• Advances in environmental research
• /
• 제8권1호
• /
• pp.23-38
• /
• 2019

In this study, Malachite Green (MG) dye removal from synthetic wastewaters by adsorption process using raw boron enrichment waste (BEW) and it's modifications (with acid and ultrasound) were aimed. 81% MG removal was obtained by BEW at optimum equilibrium conditions (time: 40 min., dosage: 500 mg/dm³, pH: 5-6, speed: 200 rpm, 298 K). MG removal from wastewaters using acid modified boron enrichment waste (HBEW) was determined as 82% at optimum conditions (time: 20 min., dosage: 200 mg/dm³, pH: 10, speed: 200 rpm, 298 K). For ultrasound modified BEW (UBEW), the highest MG removal percent was achieved as 84% at optimum conditions (time: 30 min, dosage: 375 mg/ dm³, pH: 8, speed: 200 rpm, 298 K). The equilibrium data of Malachite Green was evaluated for BEW, HBEW and UBEW adsorbents by using sorption isotherms such as Langmuir, Freundlich and Temkin models, out of which Langmuir model (R² = 0.971, 0.987 and 0.984) gave better correlation and maximum adsorption capacity was found to be 147.05, 434.78 and 192.30 mg/g, respectively. The adsorption kinetics followed the pseudo-second-order kinetic equation for sorption of MG onto wastes. A look at thermodynamic data reveals that natural sorption is spontaneous and endothermic because of free negative energy exchange and positive change in enthalpy, respectively. The results indicated that boron enrichment waste, and HCl and ultrasound-modified boron enrichment waste served as good alternative adsorbents in dye removal from wastewater.

• 한국의류학회지
• /
• 제14권2호
• /
• pp.98-103
• /
• 1990

Fibrous adsorbents containing amidoxime group which make chelate complexes with uranyl ions are studied for the recovery of uranium from sea water. Acrylic fibers are used as base Polymer. The adsorption properties of uranium are carried out to examine pH effect, concen-tration dependence, adsorption rate, separation, and chelate complex. The results obtained are as follows; 1. Metal capacity of U (VI) ion is in the range of pH $2\~10.2$. Amidoxime group-containing fiber recover U (VI) ions existed in sea water or waste water in extremely small quantities. 3. Using amidoxime group-containing fiber Cu (II) and U (VI) are separated with each other in dilute nitric acid solution (pH 2.3). 4. U (VI) chelate complexes are conformed by tridendate ligands, which are coordinated with one nitrogen and two oxygens onto amidoxime group-containing fiber.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.81-85
• /
• 1995

과실의 저장 중 과실로부터 발생된 에틸렌을 제거하여 저장성을 증대시키기 위한 효과적인 에틸렌흡착제를 개발하고 자 본 시험을 수행하였다. $ICI_3$와 $KBrO_3$을 반응주제로 하여 각각 활성탄에 흡착시켜 제조한 흡착제가 에틸렌 흡착효과가 우수하였고, 이때 황산을 반응보조제로 하였을 대에 흡착효과가 증대되었다. 흡착제의 에틸렌 흡착효과는 포화수증기와 고탄산가스의 조건에서는 저하되었고 특히 포화수증기 조건에서 심화되었다.

• 상하수도학회지
• /
• 제37권6호
• /
• pp.395-408
• /
• 2023

This study presents a novel method for addressing the issue of high-concentration contaminants (ammonium, phosphate, antibiotics) in leachate arising from decomposing livestock carcasses. Antibiotics, developed to eliminate microorganisms, often have low biodegradability and can persist in the ecosystem. This research proposes design elements to prevent contamination spread from carcass burial sites. The adsorbents used were low-grade charcoal (an industrial by-product), Alum-based Adsorbent (ABA), and Zeolite, a natural substance. These effectively removed the main leachate contaminants: low-grade charcoal for antibiotics (initial concentration 1.05 mg/L, removal rate 73.4%), ABA for phosphate (initial concentration 2.53 mg/L, removal rate 99.9%), and zeolite for ammonium (initial concentration 38.92 mg/L, removal rate 100.0%). The optimal mix ratio for purifying leachate is 1:1:10 of low-grade charcoal, ABA, and zeolite. The average adsorbent usage per burial site was 1,800 kg, costing KRW 2,000,000 per ton. The cost for the minimum leachate volume (about 12.4 m³) per site is KRW 2,880,000, and for the maximum volume (about 19.7 m³) is KRW 4,620,000. These findings contribute to resolving issues related to livestock carcass burial sites and suggest post-management strategies by advocating for the effective use of adsorbents in leachate purification.

• 환경위생공학
• /
• 제19권2호
• /
• pp.15-22
• /
• 2004

Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.