• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.541-548
• /
• 2020

There is a growing demand for natural materials to replace adhesives based on volatile organic compounds (VOCs). However, the exclusion of VOCs from the manufacturing process leads to difficulties in manufacturing, and reduction in productivity and preservability. In this paper, we report the manufacture of natural bioadhesives using the carrageenan component of seaweed. λ-carrageenan, isolated from the extracted total carrageenan, was used to prepare a highly stable adhesive for paper. The resulting composition was 52.0 ± 1.0% λ-carrageenan, 30.5 ± 0.5% Polyvinylpyrrolidone, 1.0 ± 0.05% ethylhexylglycerin, 1.5 ± 0.05% glycerin, 13.5 ± 0.5% dextrine, and 0.6 ± 0.05% food-grade antifoam emulsion. The viscosity was found to be 1.13 ± 0.07 × 105 cP (25℃), UV degradation occurred at pH6.22, drying rate was 15min, △b^* was -10.79, and △E^* ab was 8.18. The bioadhesive showed an excellent adhesion strength of 44.63 kgf/cm². Thus this adhesive showed excellent fungal resistance and good adhesive persistence, without the presence of total volatile organic compounds (TVOC), formaldehyde (HCHO), and heavy metals.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2001

The full-grown oocyte envelope of the two spined loaches, Niwaella multifasciata and Kichulchoia brevifasciata, was examined by electron microscopy. The oocyte is surrounded by its envelope, and an external modification (an adhesive structure) in the surface of the envelope is present. The envelope consists of two layers, a zona radiata externa which is the site of the adhesive structure, and a zona radiata interna, which has heterogeneous, electron-dense multi layers. The surface (zona radiata externa) of the envelope in N. multifasciata is equipped with short villuslike protuberances, which have a length of 1.5~2.5 ${\mu}m$ and are separated from each other by a distance of 2~2.5 ${\mu}m$. In contrast, K. brevifasciata has undulating or wave-like structures that extend over the entire oocyte surface. The waves are 1.5~2.5 ${\mu}m$ in length and are separated a distance of 2.5~3.3 ${\mu}m$ from each other.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.219-229
• /
• 2011

Sick building syndrome symptoms that are experienced by building occupants may be caused by toxic substances such as formaldehyde and VOCs, which are known to be emitted from building materials and wood composite products such as wood-based panel, furniture, engineered flooring and construction adhesive. In Korea, the use of wood composite products for indoor environments has increased over the last decade. Recently, wood composite products have been installed in approximately 95% of newly constructed residential buildings. The use of these products has resulted in problems related to human health, and consequently a realization about the importance of indoor air quality. In addition, consumer demand is increasing for natural materials because conventional building materials and wood composite products are made by adding urea-formaldehyde resin or they contain formaldehyde-based resin. More recently, many efforts have been made to reduce formaldehyde emission from building materials that laid in the indoor environment. Especially, if conventional formaldehyde-based adhesives are replaced with green adhesives for residential spaces, it is possible to reduce most of the emission amounts of formaldehyde in indoor environments. In line with this expectation, many researches are being conducted using natural materials such as tannin and cashew nut shell liquid (CNSL). This study discussed the affects and possibilities of green adhesives to reduce formaldehyde emission in indoor environments.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.803-812
• /
• 2019

Triplex composite is an epoxy-bonded joint structure, which constitutes the secondary barrier in a liquefied natural gas (LNG) carrier. Defects in the triplex composite weaken its shear strength and may cause leakage of the LNG, thus compromising the structural integrity of the LNG carrier. This paper proposes an autonomous triplex composite inspection (ATCI) system for visualizing and classifying hidden defects in the triplex composite installed inside an LNG carrier. First, heat energy is generated on the surface of the triplex composite using halogen lamps, and the corresponding heat response is measured by an infrared (IR) camera. Next, the region of interest (ROI) is traced and noise components are removed to minimize false indications of defects. After a defect is identified, it is classified as internal void or uncured adhesive and its size and shape are quantified and visualized, respectively. The proposed ATCI system allows the fully automated and contactless detection, classification, and quantification of hidden defects inside the triplex composite. The effectiveness of the proposed ATCI system is validated using the data obtained from actual triplex composite installed in an LNG carrier membrane system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.149-153
• /
• 2000

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece propeller shafts composed of carbonfepoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesively bonded joint was employed to join the composite shaft and the aluminum yoke. For the optimal adhesive joining of the composite propeller shaft to the aluminum yoke, the torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element method and compared with the experimental result. Then an optimal design method was proposed based on the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and FEM analyses, it was found that the static torque transmission capability of composite propeller shaft was maximum at the critical yoke thickness, and it saturated beyond the critical length. Also, it was found that the one-piece composite propeller shaft had 40% weight saving effect compared with a two-piece steel propeller shaft.

• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.33-38
• /
• 2014

The adhesive material was found for joining pottery fragments from Duurlig Nars, Mongolia estimated in AD 1C. In this study, analysis of natural substance for joining fragments of pottery was performed using gas chromatograph and mass spectrometer. As a result, it was identified triterpenoid substances, such as lupeol and betulin which were known to constituents of birch bark tar. It was suggested that Mongolian used adhesives made by birch bark tar for joining pottery fragments. Therefore if organic materials of ancient objects are systematically researched, it can provide significant evidence related to the way of life of ancient people.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.48-52
• /
• 1998

Residues such as walnut, pinenut and peanut shells were used as a filler in adhesive for bonding radiata pine plywood. The nutshell residues were prepared by simply drying to 8% moisture content and grinding the dry material using a laboratory Wiley mill with a $75{\mu}m$ (200 mesh) screen. The nutshells residues were compared to a commercial filler commonly used in adhesives by the structural plywood and laminated veneer lumber industry in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins, Inc., using phenol-formaldehyde resin. For each filler type, three-ply plywoods, 6 mm nominal thickness and 30 by 30 cm in size, were fabricated at two press times (4 and 5 min) and around 30 minute assembly time. Evaluations of the nutshell residues were carried out by tension shear tests after cyclic boil tests on plywood. The results of the performance test included tension shear strength and wood failure. All plywoods made with the nutshell fillers were comparable to those made with the control filler. These results indicate that nutshell residues would be suitable as filler for plywood adhesives.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2015

People are always pursuing the aesthetic feeling relentlessly. But some people have such problems with their hairs like alopecia, cancer chemotherapy, burns, and scalp injury. So the synthetic hair has played a very important role to make up for these deficiencies. But long term use can lead to adverse reactions or uncomfortable feeling. This is primarily caused by its properties differ with human hair. In particular, nanotribological characterizations (roughness, friction force and adhesive force) of synthetic hair surface are dissatisfy with the needs of normal hairs. This paper presents the experiments on nanotribological characterizations measurements of human hairs (coloring hair, permed hair and common hair) in shampooing condition or without shampooing condition. Using atomic force microscopy (AFM) to find out a range of synthetic hair nanotribological characterizations which can correspond with natural hair. The measurements of nanotribological characterizations focus on surface roughness, friction force and adhesive force, and a new design of AFM probe was used for measuring the nanotribological characterizations.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.83-91
• /
• 2007

The present study examined the epidermal changes of adhesive disks which occur during attachment in Parthenocissus tricuspidata using scanning and transmission electron microscopy. Several adhesive disks, each covered with a bract, develop from the shoot apical meristem during early development. In the initial stage, the adhesive disks are club-shaped and their upper and lower epidermis are indistinguishable. However, in the actively growing stage, they become spherical and both epidermis are clearly differentiated into the adventitious roots. Prior to wall attachment, the adhesive disks exhibit adaxial convex and abaxial concave shapes, and electron-dense substances are abundant in the vacuoles of epidermal cells. The peripheral area of the adhesive disk is adhered first to the wall surface, while the central area is drawn inward in a vacuum-like state during attachment. As the attachment progresses and the electron-dense substances continue to discharge, the upper and lower epidermis rapidly undergo deterioration and the disks shrink considerably. At this stage, structural changes of the lower epidermis occur much faster than in the upper one. The discharged substance is accumulated on the wall surface, and this aids the attachment of adhesive disks on the wall for long periods. In this manner, the shape and structure of the adhesive disk epidermis change drastically from initial growth to the mature stage. Further, the role of electron-dense substance and shrinkage of the disk during attachment has been discussed in Parthenocissus tricuspidata.