• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.612-621
• /
• 2002

The purpose of this study was to compare the histomorphological change of curved root canal preparation using GT rotary File, Profile .04 taper and stainless steel K-file. 45 mesial canals(over 20 degree) of extracted human mandibular first molars were mounted in resin using a modified Bramante muffle system and divided into three groups. The roots were cross-sectioned at 2.5mm 5mm and 8mm levels from apical foramen. Tracings of the canals were made from preinstrumentation pictures of the cross section. The canals were prepared using a step-back technique with stainless steel K file(group 1), Profile .04 taper rotary file(group 2) and GT rotary file(group 3). Tracings of the prepared canals were made from postinstrumentation picture. Canal centring ratio. amount of transportation, area of dentin removed and shape of canal were measured and statistically were evaluated with Student-Newman-Keuls test using Sigma Stat(Jandel Scientific Software, USA). The results were as followings : 1 Amount of transportation of group 2 was the lowest at apical part, but there was no statistical difference. The direction of transportation was the outside of curvature at apical part. 2. Centering ratio at the apical part of group 1 was the highest, and there was statistical differences between apical and middle part, apical and coronal part(p＜0.05). Centering ratio at the middle part of group 3 was the lowest, and there was statistical difference between apical and middle part(p＜0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistical difference. 3. Amount of dentin removed of group 1 was the highest at coronal, middle and apical part among three groups, and there was statistical difference(p＜0.05). 4. The majority of the cross-sectioned canal shape after instrumentation were irregular at coronal, middle and apical part. But there are more number of round shaped canals at group 3 than other group.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.209-215
• /
• 2007

The purpose of this study was to investigate gait factor and muscle activity depending on hiking poles-using. Eight healthy men volunteered for this experiment. Each of them performed down-hill walking with hiking poles-using and without poles at speed of 3.5km/h for 45 minutes on a treadmill. The treadmill was set 25% down-hill inclination. Kinematic data collected in 60Hz were recorded and analyzed by using 2D motion capture system to measure step time and step length so on. And the lower extremity muscle activities were simultaneously recorded in 1500Hz and assessed by using EMG. The statistical analysis was the paired t-test with repeated measures to compare between hiking poles-using and without poles. The level of statistical significance for all tests was .05. The results of this study were following : Step time was showed statistically different according to pole conditions. That is, the case of poles-using was longer than without poles in step time. Also, step length was showed statistically different between two conditions. Step length about trials with poles was longer than trials without poles. In the muscle activity, the case of all muscles was not showed statistical significance about pole conditions. However, in most muscles IEMG, there were some decreasing-trend relatively when hiking polesusing.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.128-135
• /
• 2022

The comparative evaluation of occupational accident fatality rates (OAFRs) of different countries is complicated owing to the differences in their level of socio-economic development. However, such evaluation is necessary to assess the national occupational safety and health system of a country. This study proposes a statistical method to compare the OAFRs of countries taking into consideration the difference in their level of socio-economic development. We first collected data on the socio-economic indicators and OAFRs of 11 countries over a 30-year period. Next, based on literature survey and statistical correlation analysis, we selected the significant independent variables and built multiple linear regression models to predict OAFR. We also determined the groups of countries having heterogeneous relationships between the independent variables and OAFRs, which are represented by the regression models. The proposed method is demonstrated by comparing the OAFR of Korea with the OAFRs of 10 other developed countries.

• Journal of Navigation and Port Research
• /
• v.46 no.2
• /
• pp.92-98
• /
• 2022

Maritime accidents result in enormous economic loss and loss of life; thus, such accidents must be prevented, and risks must be managed to prevent these occurrences Risk management must be based on statistical evidence such as variables. Because calculating when variables increase statistically can be difficult, compressing the designated variables is necessary to use the maritime accident data in Korea. Thus, in this study, variables of marine accident data are compressed using statistical methods. The date, ship type, and marine accident type included in all maritime accident data were extracted, the number of optimal variables was confirmed using the hierarchical clustering analysis method, and the data were compressed. For the compressed variables, the validity of the data use was statistically confirmed using analysis of variance, and the data of the variables identified using the variable compression method were designated. Consequently, among the monthly and yearly data, statistical significance was confirmed in yearly data, and compression was possible. The significance of the data was confirmed in six and eight types of ships and accidents, respectively, and these were compressed. These results can be directly used for prevention or prediction based on past maritime accident data. Additionally, the data range extracted from past maritime accidents and the number of applicable data will be studied in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• The Korean Journal of Applied Statistics
• /
• v.32 no.6
• /
• pp.783-794
• /
• 2019

The current ranking system of the Korean Baduk Association is based on the Elo rating system, which is widely used in the field of chess. Despite the 6.5 point dum (penalty) as compensation for playing as White, many Baduk players still prefer to playing as Black due to Black's higher winning percentage. In this paper, we present the ranking of Baduk players based on the Bradley-Terry model and address the advantage of playing as Black. We compare the ranking from our model with rankings from the Korean Baduk Association.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1982-1984
• /
• 2004

Stator coil of rotating machinery has shown different characteristics according to impregnated with coil or not. And this is major determinant of equipment's life. In this paper, PD characteristics is studied as a classification scheme between two specimens. Processing of the coil impregnation is very important thing because that influences on thermal and electrical characteristics of the coil. And then PD is occurring at the coil and causing insulation degradation. For processing statistical processing, PD data acquired from PD detector using PDASDA(partial discharge acquisition, storage and display system). And also these statistical distribution and parameter are applied to classify PD sources by neural networks. As a result of, Neural Networks have a good discrimination rate for classification PD sources.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.418-421
• /
• 2005

In this study, we analyzed surface temperature of lakes in the Han River system, using Landsat-5 and -7 time-series images. Surface temperature was extracted using NASA equation and compared with in situ 10m-depth temperature in Lake Soyang and surface temperature on five other dam lakes downstream. The 24 images out of 29 showed standard deviation of temperature difference less than $2^{\circ}C$, to which a novel statistical atmospheric correction could be applied. The correlation coefficients were 0.950 at Lake Soyang and 0.979-0.997 at the other lakes after atmospheric correction.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.3
• /
• pp.186-197
• /
• 2015

In summer 2010, field measurements of local ice loads were carried out in the Arctic Ocean using the Korean first icebreaking research vessel, ARAON. In some previous studies by the authors, several investigations for the data measured at 2010 including the relationship between the measuring points and ice loads, the possibility for observation of higher ice load and the relationship between the ship speed and ice loads were reported. During 10 days in August 2013, new field measurements were performed in similar waters of the Arctic Ocean using the same vessel, ARAON. The aim of this study is to investigate the statistical properties of 2013 measurements and compare results by two periods.

• Communications for Statistical Applications and Methods
• /
• v.12 no.1
• /
• pp.19-27
• /
• 2005

The present paper obtains Bayes estimators for the probability p(Y