• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 춘계학술대회
• /
• pp.25-29
• /
• 2005

We analyze an M/G/1 queueing system under $P_{\lambda,\tau}^M$ service policy. By using the level crossing theory and solving the corresponding integral equations, we obtain the stationary distribution of the workload in the system explicitly.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.229-232
• /
• 2005

This paper presents a preliminary analysis result on SAR-related journal papers published since 1960s. Abstracts of more than 2700 peer-reviewed English journal papers were collected and classified into various categories according to their systems, techniques, and application fields. Statistics on each category were provided so that one can understand historical and on-going development in SAR systems, techniques, and a variety of application fields such as land, ocean, cryosphere and atmosphere. This statistical data would be an essential guideline to establish a future SAR system application and satellite manoeuvring policy.

• Journal of electromagnetic engineering and science
• /
• 제8권4호
• /
• pp.148-152
• /
• 2008

This paper describes the characteristics of lightning-induced voltages on subscriber telecommunication lines in Korea. Lightning parameters such as peak voltage, rise time, decay time, and steepness of the wave front were statistically analyzed from the measured results obtained using a waveform memory system. An induced voltage measurement system was also developed and installed at 286 sites in Korea to collect the induced voltage data. The distributions of lightning-induced voltages were also analyzed using these data.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• 해양환경안전학회지
• /
• 제13권3호
• /
• pp.191-198
• /
• 2007

해양사고를 감소시키기 위한 노력에도 불구하고, 해양사고는 증가하는 추세이다. 해양사고는 선박, 인적 그리고 자연조건의 3개 조건으로 분류할 수 있다. 본 연구에서는 1997년부터 2006년 사이의 해양사고의 자료를 이용하여 해양사고를 조건 별로 분석하였고, SPSS의 분산분석기법을 사용하여 그 차이의 통계적 의미를 분석해 보았다. 항목별로 일원배치 분산분석의 결과 시간대에서는 20${\sim}$04 시간대와 그 외 시간대와는 집단간에 유의한 차이를 보였다. 속력에서는 5${\sim}$10 노트 대에서, 초인거리는 1 마일 이하에서 유의한 차이를 보여 해양사고의 예방을 위해 위에 열거한 시간대, 속력 그리고 초인거리에 유의하여야 할 것으로 판단되었다.

• 한국조경학회지
• /
• 제13권1호
• /
• pp.43-66
• /
• 1985

Korea needs proper and rational public policies on conservation and use of forest land and other natural resources because of the accelerating expansion of national land developments in recent years. Unfortunately, there is no systematic planning system to support the needs. Generally, forest land use planning needs suitability analysis based on efficient land classification system. The goal of this study was to classify a forest land using multivariate satistical methods. A case study was carried out in winter of 1983 on a mountainous area higher than 100m above sea level located at Mt. Kwanak in Anyang -city, Kyung-gi-do (province). The study area was 19.80 km$^2$wide and was divided into 1, 383 Operational Taxonomic Units (OTU's) by a 120m$\times$120m grid. Fourteen descriptors were identified and quantified for each OTU from existing national land data : elevation, slope, aspect, terrain form, geologic material, surface soil permeability, topsoil type, depth of the solum, soil acidity, forest cover type, stand size class, stand age class, stand density class, and simple forest soil capability class. For this study, a FORTRAN IV program was written for input and output map data, and the computer statistics packages, SPSS and BMD, were used to perform the multivariate statistical analysis. Fourteen variables were analyzed to investigate the characteristics of their fire quench distribution and to estimate the correlation coefficients among them. Principal component analysis was executed to find the dimensions of forest land characteristics, and factor scores were used for proper samples of OTU throughout the study area. In order to develop the classes of forest land classification based on 102 surrogates, cluster and discriminant analyses of principal descriptor variable matrix were undertaken. Results obtained through a series of multivariate statistical analyses were as follows ; 1) Principal component analysis was proved to be a useful tool for data selection and identification of principal descriptor variables which represented the characteristics of forest land and facilitated the selection of samples.

• 한국항행학회논문지
• /
• 제25권1호
• /
• pp.96-101
• /
• 2021

본 논문은 빅데이터를 이용하여 심방세동 환자의 뇌졸중 발병을 예측하는 기계 학습 모델을 제시한다. 학습 데이터로는 국민 건강 보험공단에서 제공하는 대한민국 전수에 해당하는 심방세동 환자의 정보를 수집하였다. 수집된 정보는 인구사회학, 과거 병력, 건강검진을 포함한 68개 독립변수로 구성된다. 본 연구의 목표는 기존 심방세동 환자의 뇌졸중 위험도 예측에 사용되던 통계적 모델 (CHADS2, CHA2DS2-VASc)의 성능을 검증하고 기계 학습 모델을 적용하여 기존 모델보다 높은 정확도를 가지는 모델을 제시하는 것이다. 제안하는 모델의 정확도, AUROC (area under the receiver operating characteristic)를 검증한 결과 제안하는 기계 학습 기반의 모형이 심방세동 환자의 뇌졸중 위험도를 사용한 모델이 기존의 통계적 모델보다 높은 정확도, 민감도, 특이도를 가지는 것을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2013-2024
• /
• 2006

This paper proposes a condition classification system using wavelet transform, feature evaluation and artificial neural networks to detect faulty products on the production line of reciprocating compressors for refrigerators. The stationary features of vibration signals are extracted from statistical cumulants of the discrete wavelet coefficients and root mean square values of band-pass frequencies. The neural networks are trained by the sample data, including healthy or faulty compressors. Based on training, the proposed system can be used on the automatic mass production line to classify product quality instead of people inspection. The validity of this system is demonstrated by the on-site test at LG Electronics, Inc. for reciprocating compressors. According to different products, this system after some modification may be useful to increase productivity in different types of production lines.

• Journal of Preventive Medicine and Public Health
• /
• 제28권2호
• /
• pp.450-461
• /
• 1995

This paper tested by using Micro TSP, an empirical econometric analysis to approve officially a hypothesis of price elasticity of the demand for medical care services in Korean national medical insurance and the economic effect of health care delivery system with time-series datas of Medical Insurance Statistical Yearbook$(1981\sim1993)$. The results suggest that the Korean medical insurance system shows moral hazard due to the change of coinsurance and the economic effect according to intervention of the health care delivery system, but it is different by insurers regardless of the same structure of the medical insurance scheme.

• 한국응급구조학회지
• /
• 제16권2호
• /
• pp.53-66
• /
• 2012

Purpose : Emergency medical services in China are increase in demand by people and under the greater pressure than ever before. So it is, necessary to advance the pre-hospital system in order to promote the development of emergency medical services. Methods : This is based on China-related articles, books, journals, reports, statistical data and other literature. Results : First, pre-hospital emergency medical care with the introduction of specialist training program should be established. Second, to strengthen pre-hospital emergency services and to develop the EMS guidelines. Third, the "120" reporting systems unification and awareness activation. Fourth, the preparation of the EMS facilities equipment system. Fifth, the rapid transport system establishment to the selected medical institutions. Conclusion : It is necessary to strengthen the emergency medical personnel at the scene, rapid transport, rapid patient triage and to improve the survival rate of the patients.