• 제목/요약/키워드: national statistical system

검색결과 1,557건 처리시간 0.033초

Comparison of Efficacy in Abnormal Cervical Cell Detection between Liquid-based Cytology and Conventional Cytology

  • Tanabodee, Jitraporn;Thepsuwan, Kitisak;Karalak, Anant;Laoaree, Orawan;Krachang, Anong;Manmatt, Kittipong;Anontwatanawong, Nualpan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권16호
    • /
    • pp.7381-7384
    • /
    • 2015
  • This study was conducted to 1206 women who had cervical cancer screening at Chonburi Cancer Hospital. The spilt-sample study aimed to compare the efficacy of abnormal cervical cells detection between liquid-based cytology (LBC) and conventional cytology (CC). The collection of cervical cells was performed by broom and directly smeared on a glass slide for CC then the rest of specimen was prepared for LBC. All slides were evaluated and classified by The Bethesda System. The results of the two cytological tests were compared to the gold standard. The LBC smear significantly decreased inflammatory cell and thick smear on slides. These two techniques were not difference in detection rate of abnormal cytology and had high cytological diagnostic agreement of 95.7%. The histologic diagnosis of cervical tissue was used as the gold standard in 103 cases. Sensitivity, specificity, positive predictive value, negative predictive value, false positive, false negative and accuracy of LBC at ASC-US cut off were 81.4, 75.0, 70.0, 84.9, 25.0, 18.6 and 77.7%, respectively. CC had higher false positive and false negative than LBC. LBC had shown higher sensitivity, specificity, PPV, NPV and accuracy than CC but no statistical significance. In conclusion, LBC method can improve specimen quality, more sensitive, specific and accurate at ASC-US cut off and as effective as CC in detecting cervical epithelial cell abnormalities.

드롭랜딩 시 착지형태에 따른 충격흡수구간의 운동역학적 특성 (The Biomechanical Properties of the Shock Absorption Phase during Drop Landing According to Landing Types)

  • 박규태;유경석
    • 한국운동역학회지
    • /
    • 제25권1호
    • /
    • pp.29-37
    • /
    • 2015
  • Objective : The purpose of this study was to investigate the biomechanical properties of shock absorption strategy and postural stability during the drop landing for each types. Methods : The motions were captured with Vicon Motion Capture System, with the fourteen infra-red cameras (100Hz) and synchronized with GRF(ground reaction force) data(1000Hz). Ten male soccer players performed a drop landing with single-leg and bi-legs on the 30cm height box. Dependent variables were the CoM trajectory and the Joint Moment. Statistical computations were performed using the paired t-test and ANOVA with Turkey HSD as post-hoc. Results : The dominant leg was confirmed to show a significant difference between the left leg and right leg as the inverted pendulum model during Drop Landing(Phase 1 & Phase 2). One-leg drop landing type had the higher CoM displacement, the peak of joint moment with the shock absorption than Bi-leg landing type. As a lower extremity joint kinetics analysis, the knee joint showed a function of shock absorption in the anterior-posterior, and the hip joint showed a function of the stability and shock absorption in the medial-lateral directions. Conclusion : These findings indicate that the instant equilibrium of posture balance(phase 1) was assessed by the passive phase as Class 1 leverage on the effect of the stability of shock absorption(phase 2) assessed by the active phase on the effect of Class 2 leverage. Application : This study shows that the cause of musculo-skeletal injuries estimated to be focused on the passive phase of landing and this findings could help the prevention of lower damage from loads involving landing related to the game of sports.

USN기반 PDR 센서의 검출 시간차를 이용한 표적 경로 검출 알고리즘 (Target Path Detection Algorithm Using Activation Time Lag of PDR Sensors Based on USN)

  • 이재일;이종현;배진호
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권1호
    • /
    • pp.179-186
    • /
    • 2015
  • 본 논문에서는 탐지영역에 존재하는 이동 표적의 유무 정보만을 제공하는 USN(Ubiquitous Sensor Network) 기반 PDR(Pulse Doppler Radar) 센서 노드 환경에서 인접한 PDR 센서로 부터 이동하는 표적의 경로에 따른 검출 시간차의 통계적 특성을 이용한 표적 경로 검출 알고리즘을 제안한다. 알고리즘에 사용된 변수는 실측 실험정보를 기반으로 도출한 표적 검출 시간차와 비검출 시간차이다. 그리고 PDR 센서 탐지 영역에서 발생되는 표적 이동경로는 센서를 관통하는 경로, 센서와 병렬로 이동하는 경로 그리고 두 센서 사이를 바라보고 진입한 후 한쪽 센서 방향으로 향하는 3가지 경우이고, 각 경우에 대해 500회의 실험을 수행 하였다. 그 결과 각 경우에 따른 오류 검출 백분율은 각각 5.67%, 5.83% 그리고 7.17% 으로 제한된 표적 검출 환경에서 정확하게 표적 경로를 검출한다.

특정 수강집단 학생들과 아건강 설문지 응답과의 통계적 분석 (Statistical analysis on a specific student group and their responses to sub-health questionnaire)

  • 신재경
    • Journal of the Korean Data and Information Science Society
    • /
    • 제26권4호
    • /
    • pp.895-906
    • /
    • 2015
  • 현대인들은 건강과 삶의 질에 많은 관심을 가지고 있다. 건강 관련 TV 프로그램을 통해 어떤 질병에 대해 치료 효과가 있다는 음식들이 여러 전문가들의 입에서 소개가 되고 있다. 또한, 이런 음식들이나 의학과 관련한 연구들이 많이 발표되고 있는 실정이다. 이에 본 연구에서는 우리들의 일상생활 속에서 어떤 질병의 예후를 미리 알 수 있다면 병으로 고통 받지 않고 더 좋은 삶을 즐길 수 있을 것으로 생각이 되어 특정 수강 집단 학생들을 대상으로 이와 관련된 아건강 설문지를 통해 그 결과를 통계적으로 분석해보았다. 그 결과 성별과 10개의 진단지표의 동일성 검정 결과는 호흡기만 제외하고 나머지 9개의 진단지표는 유의수준 5%에서 유의한 차이가 있는 것으로 나타났다. 또한, 연령과 10개의 진단지표의 동일성 검정 결과는 10개의 모든 진단지표는 유의수준 5%에서 유의한 차이가 없는 것으로 나타났다. 이는 대학이라는 특정 집단의 수강 학생들을 대상으로 조사하였기 때문에 연령대를 2개의 범주로 나누었지만 20대라는 하나의 범주로도 생각할 수 있기 때문으로 판단된다.

음각 점진성형에서 치수정밀도에 영향을 미치는 형상 파라미터 분석 (Analysis of Shaping Parameters Influencing on Dimensional Accuracy in Single Point Incremental Sheet Metal Forming)

  • 강재관;강한수;정종윤
    • 산업경영시스템학회지
    • /
    • 제39권4호
    • /
    • pp.90-96
    • /
    • 2016
  • Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries. However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case. It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of $L_8(2^7)$ are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.

다축선의 프로펠러 레이싱 추정에 관한 연구 (Propeller racing of ocean-going ships with multiple screw propellers)

  • 박종헌
    • 수산해양기술연구
    • /
    • 제43권3호
    • /
    • pp.222-231
    • /
    • 2007
  • This paper represents a basic statistical examination on the navigability of ocean-going ship from the point of estimating the time lasting period when propeller racing occurred by using the basic probability theory and the statistics. The propeller racing is one of the most important seakeeping qualities in relation to the safety of the main engine and shafting system. The trend of the racing has been mainly investigated in order to estimate allowable maximum propeller diameter, operation of ocean-going ships, etc.. In those studies, the propeller racing generally and mainly means the situation (propeller exposed) in which the relative motion amplitude between ship hull and wave surface would exceed a depth of point in rotary disk propeller. Therefore, it seems that the magnitude of the amplitude and its exceeding frequency of propeller racing have been examined as a principal subject of study as usual. However, the time during which the amplitude exceeds the depth of point, that is, the propeller exposes in the air, must be also one of most important factor affecting the trend of propeller racing. Then, this paper proposes a new practical method for estimating the time lasting of exposed propeller related to propeller racing in rough-confused seas on the basis of the linear strip theory and the statistics. And, numerical examples of estimating the propeller racing probability are given for four wide ship forms. Finally the usefulness of the proposed method for predicting propeller racing based on the time lasting period is discussed.

중국(中國) 성인남성용(成人男性用) 의류치수규격(衣類値數規格) 설정연구(設定硏究) I (A Study on Development of Chinese Men's Apparel Sizing System)

  • 손희순;임순;김지연
    • 패션비즈니스
    • /
    • 제8권1호
    • /
    • pp.1-15
    • /
    • 2004
  • The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

대학생의 체성분분석과 혈구산정검사의 관계연구 (A Study on the Relationship between Body Composition Analysis and CBC in University Students)

  • 조윤경;윤준;조영국;성현호
    • 대한임상검사과학회지
    • /
    • 제48권3호
    • /
    • pp.269-274
    • /
    • 2016
  • 국가의 공중 보건 정책을 개선하고 사회 경제적 발전을 결정하기 위하여 미래에 성인이 될 학생의 경향 연구는 매우 중요한 일이다. 본 논문은 남녀 대학생의 체중과 체질량지수 그리고 신체조성과 CBC 결과와 관계를 분석하는데 목적이 있다. 연구 결과, 신체조성 중에서 신장과 체중, 체질량지수 그리고 골격근 양, 기초대사량과 적혈구 수와 혈색소 그리고 적혈구용적률 등에서 양에 상관관계를 나타내었고 모두 통계적인 유의성이 있었다(p<0.01). 특히, 혈소판은 체지방량과 체지방률 그리고 허리와 엉덩이 비율에서 양의 상관관계로 나타났다(p<0.01). 이러한 연구결과는 대학생들의 건강관리에 필요한 기초자료로 의미가 있다. 따라서 대학생의 건강관리와 관련된 다량의 연구는 전략적으로 반드시 필요하다. 따라서 대학생들의 건강관리는 국가적으로 매우 중요한 부분을 차지할 수 있으며, 지속적인 관리체계 구축과 그에 따른 제도적 마련이 필요하다고 사료된다.

R를 활용한 인구변동요인 산정과 인구추계 시스템 개발 (Development of system of Population projection and driving variation on demography for Korea using R)

  • 오진호
    • 응용통계연구
    • /
    • 제33권4호
    • /
    • pp.421-437
    • /
    • 2020
  • 본 논문은 최근에 널리 사용되고 있는 R 프로그램으로 출산율, 사망률, 국제이동률을 예측하고 이들 결과를 Leslie 행렬에 대입해 인구추계 산출하는 방법을 소개한다. 특히 Kaneko (2003)가 제안한 출산율의 일반화로그감마모형, Li 등 (2013)의 사망률 LC-ER 모형, Ramsay와 Silverman (2005)가 제안한 국제이동률의 함수적데이터모형을 시현할 수 있도록 하였다. 최근 R로 구현된 대표적인 인구추계 패키지로 demography, bayesPop가 소개되고 있으나, 이는 Human Mortality Database (HMD), Human Fertility Database (HFD)에 업로드된 자료에 한에서만 분석이 가능하고 기타 데이터를 적용하기 위해서는 자료 변경과 수정이 요구된다. 특히 우리나라의 경우 HMD에 단기 간의 자료로만 제공되어 있어 이 패키기를 적용하기에는 한계점이 있다. 이에 본 논문은 이런 실정과 한국의 저출산, 고령화, 내국인, 외국인 국제이동률 상이패턴을 반영할 수 있는 R 프로그램을 소개하고, 2117년까지의 인구추계를 도출하였다.

건설폐기물(建設廢棄物)의 리싸이클링 현황(現況)과 연구동향(硏究動向) - 국내자원(國內資源)의 유효이용(有效利用)을 위한 처리(處理) 및 회수기술동향(回收技術動向)(4) - (Recent Status on the Recycling of Construction Waste and Research Trends - The Current Situation of Recycling Technology for Waste Resources in Korea(4) -)

  • 오재현;김미성;신희덕;민지원
    • 자원리싸이클링
    • /
    • 제17권2호
    • /
    • pp.16-29
    • /
    • 2008
  • 우리나라 사업장 폐기물의 51.7%에 해당되는 47,294천톤이 건설폐기물이고, 이 폐기물의 96.7%가 재활용되는 것으로 집계되어 있다. 한편 고품질 순환골재의 생산을 일부기업에서 시도하고 있으나, 천연골재를 대체하기에는 아직 미급한 것 같다. 우리나라의 경우 혼합폐기물의 정의가 애매하여, 혼합폐기물의 선별자원화가 매우 부실하다. 폐목재의 경우 PB(particle board)용으로 수요가 많으나, 현장에서 폐목재의 수집이 쉽지 않다. 2005년 대형국책과제를 수행하는 $\ulcorner$건설폐기물재활용연구단$\lrcorner$이 발족하였다. (사)한국자원리싸이클링 학회지에 게재된 건설폐기물 관련 보문은 주가 폐기물을 이용해서 건설자재로 재활용하는 것에 관한 것이었다.