• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.510-514
• /
• 2011

To detect the insulator in the fault state on the electric poles, we first measured radiation sounds from normal state insulators and error state insulators in the anechoic chamber. We processed the signals in frequency domain to find the features with filter bank, narrow band and wide band analysis. So we could found two apparent results from their frequency spectrums - one was 120Hz harmonic components, the other was high average noise level than normal state ones. Then we also introduced a technique for the direction detection of the fault state insulator using the cross correlation from the three dimensional array microphones. To eliminate the noise signal from unexpected directions, we suggested the zero padding technique in cross correlation function. From these, we could conclude that acoustic fault detection techniques are useful of the detection of insulators' faults and the estimation of the direction of the fault state insulators.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.923-926
• /
• 2000

In this paper we address the problem of detecting and estimating an unknown narrow band signal in a noise interference environment A new practical band estimation method, yielding good performance even in case of finite-length data, is presented. More specifically, wavelet packet transform is utilized to detect the more accurate time-variant band, then we estimate the power from wavelet filter-coefficients of the respective band. Also, third-order cumulants, and projection cross-correlation (PCC) criterion are utilized to achieve an effective SNR improvement for the time-variant band estimation. In case of time variant band estimation, the PCC method yields better performance than the correlation method.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.37-42
• /
• 1993

본 연구에서는 선형 필터에 백색 잡음을 통과시켜 생성된 협대역 기진 모우멘트에 대한 선박의 횡요 응답의 통계적 특성을 연구하였다. 선형 필터의 파라미터들은 생성된 협대역 기진 모우멘트와 JONSWAP 스펙트럼으로부터 계산된 횡요 기진 모우멘트와 비교함으로써 구하였다. 선박 횡요 응답의 통계적인 결과를 제시하였다.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.28-32
• /
• 2010

We demonstrate binary spectral phase coded waveform discrimination at 10 GHz for narrow band optical code-division multiple-access (NB-OCDMA) via direct electrical detection without using any optical hard-limiter. Only 9 phase-locked, 10 GHz spaced, spectral lines within a 100 GHz spectral window are used for the phase coding. Considerably high contrast ratio of 5 between signal and multiuser access interference noise can be achieved for $4{\times}10\;G\;pulse/sec$ timing coordinated OCDMA at a simple electrical receiver with 50 GHz bandwidth.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.55-64
• /
• 2007

In the built-up structure consisting of a stiff beam and a flexible plate, Grice showed that the plate behaves as an energy absorber in narrow frequency bands(called plate blocking effect). This paper deals with such beam-plate coupled structures, where the plate is an energy absorber and the excited beam is an energy path. It is found that such energy dissipation can occur in the relatively broad bands, if different stiffnesses are used in the rectangular plate. It was experimentally verified by Heckl that the energies in terms of one-third octave band averages transferred to the plate(or dissipated in the plate) increase for increased plate damping. This Paper, however, shows that the energy absorption suddenly reduces at the certain narrow frequency bands where the plate damping effect upon the coupled beam is maximum. Also, in order to minimize energy transfer through the beam in terms of one-third octave band averages, it is advantageous to increase the plate damping closer to the excitation point All these results are based on the wane method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1479-1486
• /
• 2000

This paper introduces the improved moving frame acoustic holography (MFAH) method and its application. MFAH allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. The sound field generated by moving sources is different from that of stationary ones due to the movement of the sources. Therefore the measured sound pressure by the microphone on the ground has to be processed so that it cooperates the effect of the movement. This paper discusses the effect of moving noise sources on the obtained hologram by MFAH. This assures the applicability of MFAH to the visualization of moving sources. This paper also reviews the improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.298-302
• /
• 2006

전원 잡음에 의한 링발진기의 위상잡음과 jitter의 모델을 제시하고 시뮬레이션을 수행하여 모델의 타당성을 확인하였다. 링발진기의 전원 잡음은 협대역 위상변조에 의해 중심 주파수 양측면에 잡음 주파수만큼 간격을 두고 출력 잡음 신호가 나타나는 위상잡음으로 나타났다. 또한 전원 잡음에 의한 jitter의 선형 모델을 제시하였고, 시뮬레이션에 의해 jitter가 잡음 진폭의 크기에 비례하여 발생하는 것을 확인하였다.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.530-539
• /
• 2020

Hyperspectral images feature a relatively narrow band and are easily disturbed by noise. Accurate estimation of the types and parameters of noise in hyperspectral images can provide prior knowledge for subsequent image processing. Existing hyperspectral-noise estimation methods often pay more attention to the use of spectral information while ignoring the spatial information of hyperspectral images. To evaluate the noise in hyperspectral images more accurately, we have proposed a spectral-spatial cooperative noise-evaluation method. First, the feature of spatial information was extracted by Gabor-filter and K-means algorithms. Then, texture edges were extracted by the Otsu threshold algorithm, and homogeneous image blocks were automatically separated. After that, signal and noise values for each pixel in homogeneous blocks were split with a multiple-linear-regression model. By experiments with both simulated and real hyperspectral images, the proposed method was demonstrated to be effective and accurate, and the composition of the hyperspectral image was verified.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.658-664
• /
• 2002

Unsteady flow characteristics and associated blade tonal noise of a cross-flow fan are predicted by a computational method. The incompressible Navier-Stokes equations are time-accurately solved for obtaining the pressure fluctuations between the rotating blades and the stabilizer, and sound pressure is predicted using Curie's equation. The computed fan performance is favorably compared with experimental data, and also indicates that the performance is not significantly altered by the random pitch effect at ${\phi}>0.4$. In the present study, the narrow-band noise characteristics of three impellers with a uniform and two random Pitch (type-A and-B) blades are compared by the SPL (Sound Pressure Level) spectra, and their frequency modulation characteristics of the BPF (Blade Passing Frequency) noise are also discussed.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.287-297
• /
• 1998

RPWM(Random Pulse Width Modulation)은 인버터의 스위칭 주파수를 랜덤하게 변화 시킴으로써 전압, 전류의 고조파 및 소음의 스펙트럼을 광대역에 분산시키는 PWM 기법이다. 스위칭 주파수 또는 펄스의 위치를 랜덤하게 변화시켜 고조파의 불연속적인 이산치 성분을 넓은 영역에 분산시켜 EMI, 진동 등에 좋은 효과를 낼 수 있을 뿐만 아니라, 전력소자의 스위칭에 의해 발생하는 가청 스위칭 소음을 저감할 수 있으므로 근래에 매우 각광 받고 있다. 본 연구에서는 펄스의 위치를 랜덤하게 함으로써 가청 스위칭 소음을 저감할 수 있는 새로운 RPPWM(Random Position Pulse Width Modulation) 방식의 제안 및 구현하였다. 제안된 방식은 각 3상 펄스들의 위치를 변조 구간 내의 임의의 위치에 랜덤하게 배치함으로써 RPWM을 구현하는 방식이다. 이를 위하여 16bit 공성능 마이크로 컨트롤러의 C167을 사용하여, 공각 벡터 변조에 의하여 각 변조 구간에서의 듀티비를 구한 후, 랜덤수 발생기를 이용하여 균일한 분포로 각 상의 펄스를 배치하였다. 그리고 제안된 RPPWM을 이용하여 실험한 결고, 전압, 전류 및 소음의 스텍트럼이 광대역화 되어 전력소자의 스위칭에 의해 발생하는 전동기의 가청 스위칭 소음이 현저히 저감 됨을 확인하였다.