• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.545-557
• /
• 2021

Engine is the main source of vibration that generates unwanted noise and vibration of vehicle chassis. Especially, in submarine applications, radiation of noise signatures can be detected at some distance away from the submarine using a sonar array. Thus quiet operation is crucial for submarine's survivability. This study addresses reduction of the force transmissibility originating from engines and transmitted to hull through engine mounts. An inertial damper, as an actuator of hybrid mount system, is addressed to reduce even further the level of vibration. Narrow band FxLMS algorithms are broadly used to cancel the vibration of engine mount because of its excellent performance of canceling narrow band noise. However, in real active dampers, the maximum displacement of damper mass is kinematically restricted. When the control input signal from the FxLMS algorithm exceeds this limitation, the damper mass will collide with the mechanical stops and results in many problems. Originated from these, a modified narrow band FxLMS algorithm based on the equalizer technique with the maximum allowable displacement of active damper mass is proposed in this study. Some simulation results showed that the propose algorithm is effective to suppress vibration of engine mount while ensuring given displacement constraint.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.184-186
• /
• 2005

The effect of power supply noise on the phase noise of a ring oscillator is studied. The power supply noise source in series with DC power supply voltage is applied to a 3 stage CMOS ring oscillator. The phase noise due to the power supply noise is modeled by the narrow band phase modulation. The model is verified by the fact that the spectrum of output of ring oscillator has two side bands at the frequencies offset from the frequency of the ring oscillator by the frequency of the power supply noise source. Simulations at several different frequency of the power supply noise reveals that the ring oscillator acts as a low pass filter to the power supply noise. This study, as a result, shows that the phase noise generated by the power supply noise is inversely proportional to the frequency offset from the carrier frequency.

• 대한전자공학회논문지SD
• /
• 제49권7호
• /
• pp.10-16
• /
• 2012

본 논문에서는 협대역 간섭 광학 필터(narrow band interference optical filter)를 적용하여 광학적 잡음에 내성이 강한 차세대용 마일즈 감지 시스템을 구현하고자 시도하였다. 900nm의 레이저 파장에 대해 파장범위(wavelength range) 895~915nm의 협대역 간섭 광학 필터를 적용한 결과 시가전 상황에서 발생할 수 있는 강한 광학적 잡음에 내성을 갖는 감지 특성을 얻을 수 있었다. 그러나 청색천이(blue shift) 현상에 의해 마일즈 감지 시스템에 입사각 $30^{\circ}{\sim}90^{\circ}$ 구간에 감지 사각 영역이 발생하였다. 이 문제를 해결하기위해 굴절체를 이용한 입사각 산란 방법을 제안하였고, 디옵터 5.4의 오목 메니스커스 렌즈 굴절체(concave meniscus lens refractor)를 마일즈 감지 시스템에 적용하여 입사각을 산란시킨 결과 감지 사각을 없앨 수 있었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.357-360
• /
• 1998

DS/CDMA system rejected narrow-band interference and additional White Gaussian noise which are occured at multipath, intentional jammer and multiuser to share same bandwidth in mobile communication systems. Because of having not sufficiently obtained processing gain which is related to system performance, they were not effectively suppressed. In this paper, an matched filter channel model using backpropagation neural network based on complex multilayer perceptron is presented for suppressing interference of narrow-band of direct sequence spread spectrum receiver in DS/CDMA mobile communication systems. Recursive least square backpropagation algorithm with backpropagation error is used for fast convergence and better performance in matched filter receiver scheme. According to signal noise ratio and transmission power ratio, computer simulation results show that bit error ratio of matched filter using backpropagation neural network improved than that of RAKE receiver of direct sequence spread spectrum considering of con-channel and narrow-band interference.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.69-74
• /
• 1999

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully joined with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but is not fully understood yet. Effects of cancellation path model on the Filtered-X LMS algorithm have investigated and some useful properties related to stability were discovered. Most of the results stated that the error in the cancellation path model is undesirable to the Filtered X LMS. However, we started convergence analysis of Filtered-X LMS based on the assumption that erroneous model does not always degrade its performance. In this paper, we present a way of optimizing the cancellation path modern in order to enhance the convergence speed by introducing intentional phase error. Carefully designed intentional phase error enhances the convergence speed of the Filtered X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.16-22
• /
• 2000

본 연구에서는 오차분산을 명확하게 표현하지 못하는 협대역 수중음향 측정체계의 측정성능 및 운용성을 설계 단계에서 사전 예측할 목적으로, 신호대잡음비에 따른 신뢰도 기반의 협대역 측정정확도 예측 기준을 제안한다. 제안 기준에서 신호의 평균과 분산은 신호의 샘플 개수와 신호대잡음비에 의해 표현된다. 본 논문에서는 편향된 환경에서 수중음향을 분석하는 경우와 배경소음을 사전 예측하여 측정음향에서 제거시키는 경우에 대하여 협대역 수중음향 측정성능 예측을 제안 기준에 의해 시뮬레이션하고 그 결과를 고찰한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.380-384
• /
• 2001

The household reftigerator's noise which is closely related with resident environment can hardly be evaluated its sound quality using the Korean Standards. Radiation characteristics of compressor noise consist of tonal noise in low frequency range and, or narrow band noise in high frequency range. In this study, measuring method for detecting the abnormal and low-level noise in high frequency band is presented, and control method for its reduction is proposed. After installing wall which is similar to living condition, we determined a major concerning frequency band of noise. It can be found the directivity of high frequency noise radiated from compressor by using experiment and analysis. According to isolation of noise transfer path, remarkable noise reduction is achieved.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.316-319
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on the wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise cab be spread to the wide-band area. The wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent method for the reduction of acoustic noise on the inverter drive system. In this paper a new RPPWM (Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching interval. Along with the randomization of PWM pulses, the space vector modulation is executed in the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread to wide band area and that the audible switching noise was reduced by proposed RPPWM method.

• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.591-597
• /
• 1988

In this paper, we have studied a channel capacity affected by noise which produces burst errors in the ISDN(approx 140Kbps) data transmission using a existing PSTN. First, a digital communication system model to apply a subscriber line to a narrow band ISDN channel is presented. Second, the decision methodology of a channel capacity limitation whether the pdf of the noise generated by a waveform synthesizer is Pisson or Laplacian is described. As a result of the simulation, we have obtained that the Poission distributed noise is approached to the Guassian rather than the Laplacian under the same SNR condition.

• 소음진동
• /
• 제4권3호
• /
• pp.337-343
• /
• 1994

A method of the leak detection from the pipe system by using accelerometer is proposed. The signal detected from accelerometer is proved experimentally to be a dispersive wave. Based on the experiments, a method using the narrow band pass filter and the unit impulse response function is analyzed. The method uses the characteristics of the unit impulse response function, that the function is available evenin the narrow band signal because, unlike the cross correlation, it is normalized by the auto spectrum. The accelerometer is quite easier to use than the hydrophone in adapting to the pipe system.