• The Korean Journal of Mycology
• /
• v.40 no.2
• /
• pp.98-103
• /
• 2012

This study has been conducted to screen the decolorization of 4 aromatic synthetic dyes and production of ligninolytic enzymes by 4 white rot fungi such as Bjerkanderia adusta, Cerrena unicolor, Pleurotus pulmonarius and Abortiporus biennis. It was found that B. adusta, C. unicolor, and P. pulmonarius have the ability to efficiently decolorize congo red and moderately decolorized amaranth and orange G in solid and liquid culture media. However, the decolorization rate of 4 synthetic dyes by A. biennis was relatively low. The decolorization of congo red, amaranth, orange G were related to the growth rate of the fungal mycelia in the solid medium. But, the all fungi tested did not efficiently decolorize methylene blue in the liquid culture media. To investigate the production of ligninolytic enzymes in media containing aromatic compounds, fungi were cultured in 1% naphthalene supplemented potato dextrose broth medium. All fungi tested had the capability to produce laccase, lignin peroxidase and manganese peroxidase, and B. adusta was the best ligninolytic enzymes producing white rot fungus among other fungi tested.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.675-682
• /
• 2005

Al containing mesoporous molecular sieve (Al-MMS) was synthesized by hydrolysis of $H_2SiF_6$ and $Al(NO_3)_3{\cdot}9H_2O$. The material obtained was characterized by XRD, $N_2$-physisorption. The specific surface area was $981m^2/g$, and the average pore size was uniformity $39{\AA}$. It was confirmed that the acidity of Al-MMS was milder than that of zeolite Y based on the results of $NH_3$-TPD. Active materials, Pt and Pd, were loaded on Al-MMS in order to examine the feasibility of using Al-MMS as a catalyst support in the hydrogenation of aromatic compounds included in the residue oil of a naphtha cracker. The hydrogenation activity of PtPd/Al-MMS has been studied by following the kinetics of the hydrogenation of naphthalene, and by comparing the kinetic parameters obtained with Pt and Pd catalysts supported on the other mesoporous material support and commercial conventional support materials. PtPd/Al-MMS catalyst shows the highest activity of hydrogenation and sulfur resistance. The high activity of PtPd/Al-MMS was confirmed again in the hydrogenation of PGO (pyrolized gas oil), which is residue oil obtained from a naphtha cracker. Therefore, PtPd/Al-MMS can be applied to the hydrogenation of aromatic compounds included in the residue oil of a commercial naphtha cracker commericially.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.104-108
• /
• 2001

Naphthalene derived mesophase pitch WP) was spun into short fibers by using melt-blown technology. The pitch fibers oxidative stabilization were carried out heating rates of $2^{\circ}C/min,\;5^{\circ}C/min\;and\; 10^{\circ}/min$. The heating rate was a key factor to maximate the capacity of the Li-ion secondary battery through controlling the morphology of the graphitized fiber. The diameters of the melt-blown fibers prepared were in the range of $4{\mu}m\~16{\mu}m$ with functions of air jet speed, air temperature and the temperature of the nozzle. The graphitized fibers of $10{\mu}m$ diameters showed various morphological structure with heating rate of the stabilization. Radial, radial-random and skin-core cross-sectional structure of the fibers were observed at the respective heating rate of $2^{\circ}C/min\;5^{\circ}C/min\;and\;10^{\circ}C/min$. Most crystalline structure of graphite was obtained from the fiber stabilized at heating rate of $10^{\circ}C/min$ exhibiting the best anode performance with 400 mAh/g of capacitance and $96.8\%$ of charge/discharge efficiency.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.34-42
• /
• 2015

This study was conducted to investigate the productivity of biomass and antioxidant compounds in Polygonum multiflorum by culturing explants in air-lift bioreactor containing Murashige and Skoog (MS) medium, by adding different concentrations of auxins [indole-3-butyric acid (IBA) and naphthalene acetic acid (NAA)], sucrose, methyl jasmonate (MeJA), and salicylic acid (SA). Results of this study revealed that the explants culturing on the medium supplemented with $9.84{\mu}M$ IBA and 50 g/L sucrose were observed to have higher productivity of biomass and bioactive compound than other treatments used. Thus, we expect that these results will be helpful for large-scale production of biomass and antioxidant compounds from Polygonum multiflorum.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1836-1840
• /
• 2009

Recently, hydroxymethylfurfrual (HMF) has been highlighted as a key intermediate for the production of liquid biofuels and other valuable compounds. We used sesame roots as a biocatalyst to synthesize HMF using flask cultures. The synthesis of HMF was identified by GC-mass analysis. The highest root growth was observed in cultures with 1.0 mg/l NAA at $30^{\circ}C$, while root growth was not found in those without NAA treatment. When silver nitrate ($AgNO_3$) was added, the root growth was greatest in those treated with 0.5 mg/l $AgNO_3$ and cultured at $30^{\circ}C$. In the case of HMF synthesis, its highest yield was obtained in those treated with 0.5 mg/l NAA at $25^{\circ}C$, but low HMF was detected in those treated without naphthaleneacetic acid (NAA). The addition of $AgNO_$ to the culture medium showed a 8-10% reduction in HMF yield compared to that of the control, indicating its inhibitory effect on the synthesis of HMF. On the whole, an optimal culture temperature for HMF synthesis seemed to be between $25-30^{\circ}C$.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.77-86
• /
• 1999

Partitioning of two hydrophobic organic compounds (HOCs), phenanthrene and naphthalene, to kaolinite and sorbed surfactants was studied to evaluate the feasibility of surfactant-enhanced remediation (SER) of contaminated subsurface systems. Sorbed surfactant partition coefficients. $K_ss$, showed a strong dependence on the surfactant sorption isotherms at low sorbed surfactant levels $K_ss$ values were at their highest and then decreased with increasing surfactant sorption densities. $K_ss$ values for SDS were always larger than corresponding $K_mic$values. For Tween 80, however. $K_ss$ values $K_mic$ were higher than $K_mic$ values only at the lower sorbed surfactant densities. HOC distribution between immobile and mobile phases varied with surfactant dose distribution coefficients increased initially with increasing surfactant concentrations and then decreased at higher doses. This observation shows directly the competition between sorbed and micellar surfactants for HOC partitioning. Overall results of this study demonstrate that surfactant sorption to the solid phase can lead to increases in HOC retardation in some SER applications. Therefore, before an SER process is selected, appropriate consideration of surfactant sorption and HOC partitioning to immobile versus mobile phases pertinent to a specific subsurface system must be contemplated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.302-312
• /
• 2017

Objectives: In this study, an evaluation of the working environment of furnace workers was performed and the work-relatedness of the occupational diseases were examined Methods: In this study, two electric furnaces at a single casting business site producing manganese-based iron alloy were selected, and occupational exposures to hazardous substances were evaluated for furnace workers and furnace worker assistants. Results: As a result, total dust concentration were $0.407{\sim}3.001mg/m^3$ and respirable dust concentration were $0.196{\sim}0.584mg/m^3$. The highest concentration of crystalline silica was $0.079mg/m^3$ In the case of Masato and Sosuckwhoi crystalline silica, they contained 90.85% and 4.17% respectively. Manganese concentration was the highest at a $0.205mg/m^3$ maximum. The average of black carbon is $11.56{\mu}g/m^3$ and the maximum concentration is $604.23{\mu}g/m^3$. PAHs concentration was the highest at a $78.301{\mu}g/m^3$ of naphthalene. The concentration of carbon monoxide was 18.82 ppm(total average 3.89 ppm) during pouring, and the maximum is 131 ppm. The formaldehyde concentration was 0.003 to 0.007 ppm. Conclusions: It seems that conditions in the past were worse, since casting has recently been performed only twice per day for about 20 minutes, reducing the amount of pouring, and local exhaust systems have been installed one-by-one. In addition, it was judged that the past exposure levels were higher considering the points measured on the back-side due to the risk of damage to the individual samples. It was found that operators could be exposed to high concentrations of crystalline silica, and that they were also exposed to high concentrations of metal(fume) and carbon monoxide during pouring. Therefore, there is a risk that occupational diseases such as lung cancer and COPD may occur with long-term work in such a process.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.574-589
• /
• 2006

Although concentrations of hazardous air pollutants(HAPs) are very low in the atmosphere, a growing attention has been paid on such compounds due to their high toxicity and bioaccumulation potentials into human body. In order to control and manage the amount of these materials in ambient air, it is necessary to construct monitoring system of them and to know the current concentration level of HAPs above all. In this work, a wide range of HAPs has been measured in metropolitan area to recognize the present state of HAPs in this area. The measured concentration of VOCs was higher in order of Jeonnongdong, Jeongdong, and Yangsuri. The regional difference of VOCs concentration was also highest in spring. Its total VOCs was ranged from $15.17{\sim}41.45$ ppb. Benzene $0.43{\sim}2.32$ ppb showed similar concentration level with the result of previous researches in Seoul. This value is a little higher than the average concentration 0.92 ppb for national ambient air quality standards in Japan. The concentration of aldehydes in this study was lower than those of other researches. Previous works in Seoul metropolitan area showed that the concentration of formaldehyde and acetaldehyde were higher than 5 ppb. The concentration of gaseous and particulate PAHs was high in order of winter, spring, and summer More than 90% of PAHs with low molecular weight such as 2-rings and 3-rings PAHs existed in gas phase. On the other hands, PAHs with high molecular weight more than 5-rings PAHs almost existed in particulate. In spring, the concentration of gaseous PAHs was 24.38 $ng/m^3$ in Jeongdong. Among the particulate PAHs, the concentrations of Naphthalene, Benzo(b)fluoranthene, and Benzo(g, h, i)perylene were higher than others. Especially, the concentration of Benzo(a)pyrene, a important carcinogenic pollutant, was highest in winter 0.5 $ng/m^3$ and ranged from 0.03 to 0.3 $ng/m^3$ in spring and summer, which is lower than the monitoring result in 90's. These components were mainly originated from the vehicle exhaust or heating equipment use.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.259-274
• /
• 2017

Platycodon grandiflorum (Bell flower) is an important plant that has traditionally been used as herbal medicine for the treatment of cough, phlegm, sore throats, lung abscesses, chest pains, dysuria, and dysentery. The present study was initiated to investigate the feasibility of inducing shoot and root organogenesis in cultured explants of P. grandiflorum in a range of culture media and through use of various plant growth regulators (PGRs). The plantlets (Stem containing one node) were isolated and cultured on different concentrations of Murashige and Skoog (MS) medium supplemented with PGRs. We found that proliferation and elongation of shoots and roots could be achieved on 1/4 MS for P. grandiflorum with wild and green petals and on 1/8 MS for P. grandiflorum with double petals. The highest levels of development and elongation of adventitious shoots and roots were observed when petal explants were cultured on 1/4 MS (pH 3.8) supplemented with 5% sucrose. Increasing the agar concentration reduced shoot growth and rooting potential; nevertheless, the highest number of shoots and roots was observed on 0.6% agar. In the case of growth regulators, 1/4 MS supplemented with $1mg\;L^{-1}$ 6-benzylaminopurine (BA) was found to be best for shooting, although higher concentrations of BA tended to reduce shoot and root elongation. The highest number of shoots was achieved on $0.5mg{\cdot}L^{-1}$ thidiazuron (TDZ) from double petal explants grown on 1/8 MS. However, root and shoot elongation were found to decrease when TDZ concentrations were increased. Low concentrations of kinetin, naphthalene acetic acid, indole acetic acid, and 3-indole butyric acid induced shoot and root proliferation and elongation. Taken together, our study showed that low concentrations of PGRs induced the greatest root formation and elongation, showing that the optimal concentration of PGRs for shoot proliferation was species-dependent.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.277-284
• /
• 2012

In the present study, the effects of plant growth regulators on adventitious shoot and root formation of various explants of $in$ $vitro$ seedlings of $Solanum$ $nigrum$ L. were investigated to determine the optimum conditions for the high-efficiency plant regeneration of this species. The formation of adventitious shoots was higher in leaf explants than in cotyledon, hypocotyl, or epicotyl explants at low concentrations (0.5~2.0 mg $L^{-1}$ ) of 6-benzylaminopurine (BAP). The number of adventitious shoots and the shoot length were also higher in both leaf and cotyledon explants. In particular, 2.0 mg $L^{-1}$ BAP was most effective for stimulating the induction and multiplication of adventitious shoots. In terms of root formation and root development from shoots that were separated from multiple shoots, indole butyric acid (IBA) and indole acetic acid (IAA) were more effective than ${\alpha}$-naphthalene acetic acid (NAA). The percentage of rooting as well as the number of roots per shoot (4.0), root length (7.82 cm), and shoot length (8.76 cm) was highest on MS media supplemented with 0.05 mg $L^{-1}$ IAA. Furthermore, 100% of the regenerated plantlets survived when transplanted to compost soil. These results suggest that leaf explants are the best source for the high-efficiency regeneration of $S.$ $nigrum$ L., and that 2.0 mg $L^{-1}$ BAP and 0.05 mg $L^{-1}$ IAA are the best conditions for shoot and root induction, respectively.