• Journal of Korea Foundry Society
• /
• v.23 no.1
• /
• pp.47-51
• /
• 2003

This experimental study was carried out to investigate the solidification characteristics of polystyrene added styronaphthalene pattern materials using various castability test methods. The styronaphthalene showed an excellent filling capacity and shaping behavior having about 0.2 mm meniscus radius. The shell thickness of styronaphthalene showing smooth wall at the solid/liquid interface increased with the increasing of polystyrene addition. The solidification microstructure of styronaphthalene showed a typical thin ribbon reinforced composite structure, which has fibrous amorphous skeleton of polystyrene and crystalline naphthalene. From the results of this study, it was found that the polystyrene added styronaphthalene showed a precision shaping behavior as disposable pattern material under the atmospheric condition.

• YAKHAK HOEJI
• /
• v.35 no.6
• /
• pp.483-485
• /
• 1991

A furanquinone substance(methyl 5-hydroxy-dinaphtho [1,2-2',3'] furan-7,12-dione-6-carboxylate) which has been isolated from the methanol extract of Paulownia tomentosa stem was synthesized by condensing 2,3-dichloro-1,4-naphthoquinone with methyl 1,4-dihydroxy-naphthalene-2-carboxylate in pyridine and identified by NMR, MS, UV, IR etc.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.69-72
• /
• 2005

In this study, it is contents to application on AE water reducing admixture for high early strength, which reduce to construction period for cost down in construction. In experiment result on the kinds of AE water reducing admixture for concrete strength promotion, when passed 60 minutes, while it was happened on lignin and naphthalene system about $30\∼35\%$ that loss related to slump, slump flow and air, but happened about $8\∼10\%$ on polycarboxylic system. And the result of compressive strength tests, when 32 hours passed in polycarboxylic system than lignin and naphthalene system, was showing an increase of 10$\%$. Accordingly, concrete properties was measured to condition change by the addition amount and curing temperature of polycarboxylic system. The required curing temperature to gain 5MPa of compressive strength, which is capable of side form stripping, must keep more than smallest 12. 5$^{circ}C$ when polycarboxylic system is used. As a result, AE water reducing admixture of polycarboxylic system may apply effectively to high early strength concrete

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.457-460
• /
• 2008

It was predicted that the most recent technological developments in concrete technology rely on enhanced admixture efficiency rather than on improvement in cement manufacturing. Four major commercially available of organic chemical admixtures are modified lignosulfonates (LS), sulfonated naphthalene-formaldehyde resins (SNF), sulfonated melamine-formaldehyde resins(SMF) and polycarboxylate(PC). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps and reaction conditions such as the mole ratio of melamine to formaldehyde was changed. After application of SMF superplasticizer to cement concrete, the physical properties including workability, slump loss, compressive strength were compared with SNF

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2029-2032
• /
• 2008

In this study, we have investigated the effects of upstream rectangular winglet pair (RWP) on the heat/mass transfer coefficients in a dimple. Dimple print diameter was fixed at 20mm and the dimple depth was 4.0mm (0.4H). The dimple surface was coated with naphthalene for mass transfer experiment and the test plate was positioned at a rectangular straight duct whose aspect ratio (W/H) was 20. A rectangular winglet pair was positioned at y/d=-2.5. The RWP angle ($\beta$) was varied from $15^{\circ}$ to $60^{\circ}$. The Reynolds number, based on the duct height (H), was 5,000. with changing the RWP angle ($\beta$), the induced vortices had different flow characteristics; longitudinal or transversal vortices. These variation of induced vortices affected on the heat/mass transfer characteristics in the dimple.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.185-190
• /
• 2007

For the successful design of heat exchangers, it is very important to understand local heat transfer characteristics on the circular cylinder of the cross flow heat exchangers. In this study, the heat exchanger using screen is developed to enhance heat transfer. The naphthalene sublimation technique is employed to measure the local heat transfer coefficients in the heat exchanger. The experiments are performed for single circular tube, in-line array tube bank with and without heat transfer promoter. Local Nusselt numbers of single circular tube and tube bank with heat transfer promoter are investigated and compared to those of without heat transfer promoter.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.861-870
• /
• 1999

An experimental study was carried out to investigate the effects of using various shapes of turbulence promoter on the heat-transfer enhancement of 2-D and 3-D arrays of rectangular modules in a rectangular channel for design of noiseless and low-powered cooling fan in the electronic systems. Measurements of heat/mass transfer coefficients were made using a naphthalene sublimation technique, and the friction factors were measured for Reynolds numbers in the range$3.3{\time}10^3$~$1.6{\time}10^4$. Flow visualization was peformed by oil-film method. It was found that heat transfer and pressure drop increased remarkably due to the existence of the promoter. The results of the performance evaluation based on equal pumping power were showed that substantial heat-transfer enhancement was obtained at low Reynolds number range by use of a turbulence promoter.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.12
• /
• pp.837-845
• /
• 2012

The purpose of this research is to investigate the heat transfer enhancement by the multiple tripping wires installed on a flat plate. Naphthalene sublimation technique is used to measure the local mass transfer coefficients, and then heat transfer coefficients are calculated using heat/mass transfer analogy. Experiments are performed for the developed and developing flow conditions. Local and average heat transfer coefficients from the flat plate with three tripping wires are compared with those of no and one tripping wire. Remarkable heat transfer enhancements are found resulting from the boundary layer separation by the tripping wires, especially in the laminar boundary layer.

• Journal of Microbiology
• /
• v.37 no.4
• /
• pp.185-192
• /
• 1999

A phenanthrene-degrading bacterium was isolated from an oil-spilled intertidal sediment sample and identified as Sphingomonas sp. KH3-2. The strain degraded polycyclic aromatic compounds such naphthalene, fluorene, biphenyl, and dibenzothiophene. When strain KH3-2 was cultured for 28 days at 25C, a total of 500 ppm of phenanthrene was degrated with a concomitant production of biomass and Folin-Ciocalteau reactive aromatic intermediates. Analysis of intermediates during phenanthrene degradation using high-performance liquid chromatography and gas chromatography/mass spectrometry indicated that Sphingomonas sp. KH3-2 primarily degrades phenanthrene to 1-hydroxy-2-naphthoic acid (1H2NA) and further metabolizes 1H2NA through the degradation pathway of naphthalene.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.1
• /
• pp.147-153
• /
• 1995

The cultured mycelial cells of Ganoderma lucidum was extracted by alkali, and then neutralized by acid. The extract was passed through the column of DEAE cellulose for more purification. The neutral fraction was concentrated and precipitated with 95% ethanol. The precipitate was lyophilized and then PSG(polysaccharides) was obtained. PSG was composed of 82.2% polysaccharide, 0.7% protein and 17.1% uronic acid. Sugar conjugates of its hydrolysates were produced using with fluorescent compound(7-amino-1,3-naphthalene disulfonic aicd : 7-AGA), and then fluorescent labeled sugar conjugates were separated by reverse phase high perfomance liquid chromatography. Hydrolysates of PSG were composed of sixteen amino acids and 95.7% glucose, 2.7% xylose, 1.6% fucose and tract amount of galactose and mannose. The immunomodulating effects of PSG on macrophage were perfomed using murine macrophage cell line ATCC TIB 71 cells. PSG augumented the phagocytic activity of TIB 71 cells against fluorescent latex beads.