• Macromolecular Research
• /
• 제14권2호
• /
• pp.214-219
• /
• 2006

Cast Nafion-based composite membranes containing different amounts of organic, nanorod-shaped polyrotaxane were prepared and characterized, with the aim of improving the properties of polymer electrolyte membranes for direct methanol fuel cell applications. Polyrotaxane was prepared using the inclusion-complex reaction between ${\alpha}$-cyclodextrin and poly(ethylene glycol) (PEG) of different molecular weights. The addition of polyrotaxane to Nafion changed the morphology and reduced the crystallinity. The conductivity of the composite membranes increased with increasing polyrotaxane content up to 5 wt%, but then decreased at higher polyrotaxane contents. Well-dispersed, organic polyrotaxane inside the membrane can provide a tortuous path for the transport of methanol, as the methanol permeability depends on the aspect ratio of polyrotaxane, which is controlled by the molecular weight of PEG. All of the Nafion-based, polyrotaxane composite membranes showed a higher selectivity parameter than the commercial Nafion films did.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.65-66
• /
• 2006

[ $TiO_2$ ] single crystalline nanorods are prepared from electrospun fibers which are composed of nanofibrils with an island-in-a-sea morphology. The mechanical pressure produces each fibril into nanorods which are converted to anatase single crystals after calcinations. HRTEM shows that the (001) plane is growing along the longitudinal direction of the rod. In this work, the nanorod electrode provides the efficient photocurrent generation in a quasi-solid state dye-sensitized solar cells (DSSCs) using highly viscous PVDF-HFP based gel electrolytes. The overall converision efficiency of the $TiO_2$ nanorods shows 6.2 % under $100\;mW/cm^2$ (AM 1.5G) illumination.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.251-253
• /
• 2006

본 연구에서는 Anodic Aluminum Oxide(AAO) 템플레이트 제조 시 알루미늄의 결정방위가 세공 형성에 미치는 영향을 연구하였다. 시료는 직경 20mm 두께 2mm의 세가지 단결정 시편을 사용 하였으며 이는 XRD 장비로 $2{\theta}$ 측정결과를 통해 확인 하였다. 양극 산화전 평활한 면을 얻기 위해 다이아몬드분말로 미세연마하였으며 양극산화는 세가지 시편 모두 동일한 조건에서 2단계공정까지 진행하여 반복 실험 하였다. 결과는 전계방출주사전자현미경(FE-SEM)으로 표면의 세공형태를 관찰 하였다.

• 세라미스트
• /
• 제22권3호
• /
• pp.230-242
• /
• 2019

Functional ceramics are widely utilized in a variety of application fields such as structural materials, sensors, energy devices, purification filter and etc due to their high strength, stability and chemical activity. With the breakthrough development of nanotechnology, many researchers have studied new types of nanomaterials including nanoparticle, nanorod, nanowire and nanoplate to realize high-performance ceramics. Especially several groups have focused on the 3D nanostructured ceramics because of their large surface area, efficient load transfer, ultra-fast ion diffusion and superior electrical (or thermal) conductivity. In this review, we introduce the reported fabrication strategies of the 3D nanostructured and functional ceramics, also summarized the 3D nanostructured ceramic based high-performance applications containing photocatalysts, structural materials, energy harvesting and storage devices.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.230-234
• /
• 2009

Hydrogen and Oxygen plasma treatments have been done on sonochemical grow ZnO nanorods by varying treatment temperature and time, The changes(position and intensity) in ultraviolet(UV) peaks and green peaks of photoluminescence(PL) spectroscopy have been measured, Experimental results showed; i) in the case of hydrogen plasma treatment, the blue shift of UV peak and the increase of PL intensity of the UV peak were observed as the increase of the process time and temperature, ii) in the case of oxygen plasma treatment, the red shift of green peak was observed and the ratio of $I_{Green}/I_{UV}$ was also increased, as the increase of the process time and the temperature.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.454-459
• /
• 2003

We investigate the structure and properties of SiC (Silicon Carbide) nanotubes using molecular dynamics simulation based on the Tersoff bond-order potential. For small diameter tubes, the Si-C bond distance of SiC nanotubes decreases as the nanotube diameter is decreased, due to curvature of the nanotube surface. We find that Young's modulus of SiC nanotubes is somewhat smaller than that of the other nanotubes considered so far. However, Young's modulus for SiC nanotubes is larger than that of ${\beta}$-SiC and almost equal to the experimental value for SiC nanorod and SiC whisker. The strain energy of the SiC nanotubes is also lower than that of the other nanotubes. The lower strain energy of SiC nanotubes raises the possibility of synthesis of SiC nanotubes.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.79.2-79.2
• /
• 2012

In this work, vertically aligned metal oxide nanorods(ZnO, $TiO_2$, $WO_3$) were grown onto CuO film at the room temperature. The fabricated nanorods of 90nm~500nm diameter range and $1{\mu}m{\sim}15{\mu}m$ of length range. Growth of metal oxide nanorods only depends on thickness of CuO film in this method, and it is grown at both of room temperature and high temperature. That means, it is much faster mathod to make the vertical metal oxide nanorods than old method such as hydrothermal method.

• Journal of Electrochemical Science and Technology
• /
• 제7권3호
• /
• pp.206-213
• /
• 2016

Transition metal oxide-based electrodes for lithium ion batteries have recently attracted much attention because of their high theoretical capacity. Here we report the electrochemical behavior of cobalt oxide nanorods as anodes, prepared by a template-free, one-step electrochemical deposition of cobalt nanorods, followed by an oxidation process. The as-deposited cobalt has a slightly convex columnar structure, and controlled thermal oxidation produces cobalt oxides of different Co/O ratios, while the original shape is largely preserved. As an anode in a rechargeable lithium battery, the Co/O ratio has a strong effect on initial capacity and cycling stability. In particular, the one-dimensional Co@Co_xO_y core shell structure obtained from a mild heat-treatment results in superior cycling stability.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3367-3371
• /
• 2013

MgO nanorods were fabricated by the thermal evaporation of $Mg_3N_2$. The influence of ZnO sheathing and hydrogen plasma exposure on the photoluminescence (PL) of the MgO nanorods was studied. PL measurements of the ZnO-sheathed MgO nanorods showed two main emission bands: the near band edge emission band centered at ~380 nm and the deep level emission band centered at ~590 nm both of which are characteristic of ZnO. The near band edge emission from the ZnO-sheathed MgO nanorods was enhanced with increasing the ZnO shell layer thickness. The near band edge emission from the ZnO-sheathed MgO nanorods appeared to be enhanced further by hydrogen plasma irradiation. The underlying mechanisms for the enhancement of the NBE emission from the MgO nanorods by ZnO sheathing and hydrogen plasma exposure are discussed.