• 한국산업보건학회지
• /
• 제20권4호
• /
• pp.248-255
• /
• 2010

Airborne nanoparticle concentrations in three metrics (particle surface area concentration, particle number concentration, and particle mass concentrations) were measured by task in a laboratory making carbon nanotubes (CNTs) films using three direct reading instruments. Because of the conducted other researcher's experiment before the tasks, airborne nanoparticle surface area and number concentrations are the highest at the first time conducted weighing and mixing by sonication task, respectively. Because of the mist generated during mixing by sonication, the highest airborne nanoparticle surface area and PM1 concentrations were measured in the task among the total. Nanoparticle surface area concentrations at the researchers' breathing zones had high correlation (r=0.93, p<0.01) with those measured at an area in the laboratory. This result indicates that nanoparticles generated during the experiment contaminated the whole room air. When the experiment performed all the fume hoods weren't operated and making CNTs films task were conducted in the out of the fume hoods. In conclusion, researchers performing making CNTs film experiments were exposed to airborne nanoparticles generated during the experiment without adequate controls. We recommend that adequate controls should be implemented so that workers' exposures to airborne nanoparticle are limited to minimum levels.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.617-623
• /
• 2008

The membrane filter adhered with nanostructured porous layer was made by heat treatment after deposition of nanoparticle-agglomerates sintered in aerosol phase onto a conventional micron-fibrous metal filter as a substrate filter. The Sintered-Nanoparticle-Agglomerates-coated NanoStructured porous layer Membrane Filter (SNA-NSMF), whose the filtration performance was improved compared with the conventional metal membrane filters, was developed by adhesion of nanoparticle-agglomerates of dendrite structure sintered onto the micron-fibrous metal filter. The size of nanoparticle-agglomerates of dendrite structure decreased with increasing the sintering temperature because nanoparticle-agglomerates shrank. When shrinking nanoparticle-agglomerates were deposited and treated with heat onto the conventional micron-fibrous metal filter, pore size of nanostructured porous layer decreased. Therefore, pressure drops of SNA-NSMFs increased from 0.3 to 0.516 kPa and filtration efficiencies remarkably increased from 95.612 to 99.9993%.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• 웰빙융합연구
• /
• 제4권4호
• /
• pp.15-25
• /
• 2021

Purpose: The purpose of this study is to form a new cosmetic market through the development of a composition with high skin permeability after adding omega 3 to Aloe Vera soothing gel products. Research design, data and methodology: In this study, omega-3 fatty acids were added to cosmetic products in the form of soothing gels. By applying nanoparticle technology to rapidly increase the penetration of raw materials into the skin, characteristics related to skin moisture and regeneration were determined. Omega-3 was used as a raw cosmetic material. Then 5% and 15% nanoparticle aqueous products containing omega-3 were prepared. The developed water hydrate was subjected to skin permeability test using artificial skin. Results: 53 hours of artificial transdermal penetration of the developed composition, the ethanol-based omega-3 containing nanoparticle solubilized raw material was about three times higher penetration than the ethanol-based omega-3 containing nanoparticle solubilized raw material. Conclusions: The raw material product (SR-1901) containing 5% of omega-3 nanoparticle water hydrate has skin regeneration ability and pain reduction effect. It can be expected that the skin cosmetics market will be reorganized into a new distribution structure and opportunity through omega-3 supplemented soothing gel cosmetics with improved efficacy than existing cosmetics.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.302-306
• /
• 2009

이 연구에 사용된 9종류의 나노입자는 직경 100 nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius로 부화하였다. 20 mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 점차 영향을 줄 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.137-141
• /
• 2008

이 연구에 사용된 9종류의 나노입자는 직경 100nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius의 부화하였다. 20mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 전파 영향을 준 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

• Journal of Microbiology and Biotechnology
• /
• 제26권10호
• /
• pp.1668-1674
• /
• 2016

Red ginseng, a steamed and sun-dried ginseng, is a popular health-promoting food in Korea and other Asian countries. We introduced nanofertilizer technology using gold nanoparticles in an effort to develop red ginseng with an elevated level of ginsenosides, the main active compounds of ginseng. Shoots of 6-year-old ginseng plants were fertilized three times with colloidal gold nanoparticle sprays. Red ginseng extract was prepared from the main roots. The concentrations of gold and ginsenosides were measured following gold nanoparticle treatment. To evaluate the anti-inflammatory effects, mouse peritoneal macrophages of male BALB/c mouse were stimulated with lipopolysaccharide plus interferon-γ in the presence of extracts from red ginseng with or without gold nanoparticle treatment. The content of ginsenosides, such as Rg1, Re, Rf, and Rb1, increased in ginseng treated with gold nanofertilizer whereas the steaming process increased only the levels of Rd and Rg3. The levels of nitric oxide, inducible nitric oxide synthase, and interleukin-6, but not tumor necrosis factor-α, were more suppressed in macrophages treated with extract from gold nanoparticle-treated red ginseng. Our results show that the use of a colloidal gold nanoparticle fertilizer improved the synthesis of ginsenosides in ginseng and enhanced the anti-inflammatory effects of red ginseng. Further research is required to elucidate the causal factors for the gold-induced change in ginsenoside synthesis and to determine the in vivo effect of gold nanoparticle-treated ginseng.

• Composites Research
• /
• 제29권4호
• /
• pp.223-229
• /
• 2016

SiC 나노입자는 고분자 수지의 굴곡특성을 강화하기 위해 사용된다. 본 연구는 대용량 SiC 나노입자가 함유된 에폭시 수지를 제조하고 분산도를 평가한 것에 관한 내용이다. SiC 나노입자를 혼합하는 과정에 교반기와 초음파 분쇄기를 동시에 사용하여 20 wt%의 SiC 나노입자 강화 에폭시 복합재료를 제조하였다. 교반기와 분쇄기를 동시에 이용하는 방법으로 분산속도와 분산도가 개선됨을 기계적 물성 평가와 FE-SEM 결과로 확인하였다. 이러한 결과로 SiC 나노입자의 분산 모델을 구축하였다. 궁극적으로, 탄소섬유(UD 타입)와 20 wt% SiC 나노입자 강화 에폭시 수지를 사용하여 복합재료를 제조하였다. 교반기와 분쇄기를 동시에 사용했을 경우 초음파 분쇄기만 이용했을 경우에 비해 우수한 복합재료의 물성을 나타내었다.

• Molecular & Cellular Toxicology
• /
• 제5권4호
• /
• pp.317-322
• /
• 2009

Hepatic fibrosis is one of chronic liver diseases which spread in worldwide and it has high risk to turn advanced cirrhosis and hepatocellualr carcinoma. Brassica family has been produced for commercial purpose and in Korea Brassica rapa (Turnip) is cultivated in Ganghwa County, Gyeonggi-do Korea and used for making Kimchi. Recently pharmacological effects of turnip have been known; diabete mellitus modulation, alcohol oxidization, and fibrosis inhibition. In previous study we found antifibrogenic effect of turnip water extract and in this study we made turnip nanoparticle to promote turnip delivery into liver. At the same time we assessed the biological safety of turnip nanoparticle. Thioacetamide (TAA) induced hepatic nodular formation and fibrosis (mean of fibrosis score: 4). However, 1% turnip nanoparticle inhibited TAA-induced hepatic nodular formation and fibrosis (mean of fibrosis score: 2-3). Activities of serum enzymes (aspartic acid transaminase (AST), alanine transaminase (ALT), and total bilirubin (T-Bil)), complete blood count (CBC), and the appearance of organs were not different from control and 1% turnip nanoparticle treatment. Conclusively 1% turnip nanoparticle significantly reduced TAA-induced hepatic fibrosis and was safe in 7-weeks feeding.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.840-848
• /
• 2009

In the boiling heat transfer mechanism, CHF(critical heat flux) is the significantly important parameter of the system. So, many researchers have been struggling to enhance the CHF of the system in enormous methods. Recently, there were lots of researches about enormous CHF enhancement with the nanofluids. In that, the pool boiling CHF in nanofluids has the significantly increased value compared to that in pure water because of the deposition of the nanoparticle on the heater surface in the nanofluids. The aim of this study is the comparison of the effect of the nanoparticle deposited surface and the modified surface which has the similar morphology and made by MEMS fabrication. The nanoparticle deposited surface has the complex structures in nano-micro scale. Therefore, we fabricated the surfaces which has the similar wettability and coated with the micro size post and nano structure. The experiment is performed in 3 cases : the bare surface with 0.002% water-ZnO nanofluids, the nanoparticle deposited surface with pure water and the new fabricated surface with pure water. The contact angle, a representative parameter of the wettability, of the all 3 cases has the similar value about 0 and the SEM(scanning electron microscope) images of the surfaces show the complex nano-micro structure. From the pool boiling experiment of the each case, the nanoparticle deposited surface with pure water and the fabricated surface with pure water has the almost same CHF value. In other words, the CHF enhancement of the nanoparticle deposited surface is the surface effect. It also shows that the new fabricated surface follows the nanoparticle deposited surface well.