• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.160-169
• /
• 2004

Polystyrene/layered silicate nanocomposites were prepared by melt intercalation. To examine the distribution of the clay in polymer matrix, small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) were used. Intercalated nanocomposites were obtained and their rheological properties were investigated. Microcellular nanocomposite foams were produced by using a supercritical fluid. As clay contents increased, the cell size decreased and the cell density increased. It was found that layered silicates could operate as heterogeneous nucleation sites. As the saturation pressure increased and the saturation temperature decreased, the cell size decreased and the cell density increased. Microcellular foams have different morphology depending upon the dispersion state of nanoclays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.87-87
• /
• 2010

Epoxy/mica has been used as the material of high-voltage rotator stator winding due to its high insulation performance, mechanical strength, and thermal stability. In recent years, however, it shows frequent changes in the load of generators and frequent automatic stops due to the significant increase in peak loads from the increase in the applied load of power facilities according to the introduction of advanced and high-technology equipments. Thus, it is necessary to develop new materials that highly develop the conventional insulation materials. Nanotechnology introduced in the present time has become an alternative plan that overcomes such technical limitations. In addition, the nano-scaled intercalation composite has been known as the material that represent excellent electrical, mechanical, and thermal characteristics compared to the conventional materials. This study investigated the dielectric dispersion and relaxation characteristics of the nanocomposite, which was fabricated by mixing epoxy matrix with nano-scaled intercalation mica and clay, according to changes in frequencies and temperatures.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.422-423
• /
• 2006

Ultrasonic-milling of metal oxide nanopowders for the preparation of tungsten heavy alloys was investigated. Milling time was selected as a process variable. XRD results of metal oxide nanopowders ultrasonic-milled for 50 and 100h showed that mean crystallite size reduced with increasing milling time and there was no evidence of contamination or change of composition by impurities. It was found that nanocomposite powders reduced at $800^{\circ}C$ in $H_2$ atmosphere had a composition of 93.1W-4.9Ni-2.0Fe by EDX analysis. Hardness of sintered samples of 50 and 100h was 390 and 463 Hv, respectively, which corresponds to the hardness of commercial products.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.267-274
• /
• 2018

$TiO_2/CuS$ nanocomposites were fabricated by precipitation of nanosized CuS via sonochemical method on electrospun $TiO_2$ nanofibers, and their structure, chemical bonding states, optical properties, and photocatalytic activity were investigated. In the $TiO_2/CuS$ nanocomposite, the position of the conduction band for CuS was at a more negative than that of TiO; meanwhile, the position of the valence band for CuS was more positive than those for TiO, indicating a heterojunction structure belonging to type-II band alignment. Photocatalytic activity, measured by decomposition of methylene blue under visible-light irradiation (${\lambda}$ > 400 nm) for the $TiO_2/CuS$ nanocomposite, showed a value of 85.94% at 653 nm, which represented an improvement of 52% compared to that for single $TiO_2$ nanofiber (44.97% at 653 nm). Consequently, the photocatalyst with $TiO_2/CuS$ nanocomposite had excellent photocatalytic activity for methylene blue under visible-light irradiation, which could be explained by the formation of a heterojunction structure and improvement of the surface reaction by increase in surface area.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.573-578
• /
• 2008

In the preparation of hydroxyapatite(HAp)/gelatin(GEL) nanocomposite, GEL matrix was modified by the introduction of chondroitin sulfate(ChS) to obtain a strongly organized composite body. The formation reaction of the HAp/GEL-ChS nanocomposite was then investigated via XRD, DT/TGA, FT-IR, TEM and SEM. The organic-inorganic interaction between HAp nanocrystallites and GEL molecules was confirmed from DT/TGA and FT-IR. According to the DT/TGA results, the exothermal temperature zone between 300 and $550^{\circ}C$ showed an additional peak temperature that indicated the decomposition of the combined organics of the GEL and ChS. From the FT-IR analysis, calcium phosphate(Ca-P) was covalently bound with the GEL macromolecules modified by ChS. From TEM and ED, the matrix of the GEL-ChS molecules was mineralized by HAp nanocrystallites and the dense dried nanocomposite body was confirmed from SEM micrographs.

• Advances in materials Research
• /
• v.2 no.2
• /
• pp.99-109
• /
• 2013

In the present investigation, nanocomposite films with poly(methyl methacrylate) (PMMA) as a polymer matrix and barium titanate as a filler were prepared by solution casting method. Barium titanate nano particles were prepared using Ti(IV) triethanolaminato isopropoxide and hydrated barium hydroxide as precursors and tetra methyl ammonium hydroxide (TMAH) as a base. The nanocomposite films were characterized using XRD, FTIR, SEM and dielectric spectroscopy techniques. Dielectric measurements were performed in the frequency range 100 Hz-10 MHz. Dielectric constant of nanocomposites were found to depend on the frequency, the temperature and the filler fraction. Dissipation factors were also influenced by the frequency and the temperature but not much influenced by the filler fractions. The 10 wt% of BT-PMMA nanocomposite had the lowest dielectric constant of 3.58 and dielectric loss tangent of 0.024 at 1MHz and $25^{\circ}C$. The dielectric mixing model of Modified Lichtenecker showed the close fit to the experimental data.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.1
• /
• pp.7-12
• /
• 2009

Purpose: Gelatin-hydroxyapatite nanocomposite is similar to inorganic nanostructure of bone. To make a scaffold with osteoinductivity, bone marrow derived stem cells from rabbit femur were impinged into the nanocomposite. This vitro study was to test osteogenic differentiation of the stem cells in the nanocomposite, which was made by authors. Material & Methods: Gel-HA nanocomposite with 10g of HA, 3 g of Gel has been made by co-precipitation process. Bone marrow was obtained from femur of New Zealand White rabbits and osteogenic differentiation was induced by culturing of the BMSCs in an osteogenic medium. The BMSCs were seeded into the Gel-HA nanocomposite scaffold using a stirring seeding method. The scaffolds with the cells were examined by scanning electron microscopy (SEM), colorimetry assay, biochemical assay with alkaline phosphatase (ALP) diagnostic kit, osteocalcin ELISA kit. Results: Gel-HA nanocomposite scaffolds were fabricated with relatively homogenous microscale pores ($20-40{\mu}m$). The BMSCs were obtained from bone marrow of rabbit femurs and confirmed with flow cytometry, Alizarin red staining. Attachment and proliferation of BMSCs in Gel-HA nanocomposite scaffold could be identified by SEM, ALP activity and osteocalcin content of BMSCs. Conclusion: The Gel-HA nanocomposite scaffold with micropores could be fabricated and could support BMSCs seeding, osteogenic differentiation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.25-28
• /
• 2003

Carbon nanotubes(CNTs), since their first discovery, have been considered as new promising materials in various fields of applications including field emission displays, memory devices, electrodes, NEMS constituents, hydrogen storages and reinforcements in composites due to their extra-ordinary properties. The carbon nanotube reinforced nanocomposites have attracted attention owing to their outstanding mechanical and electrical properties and are expected to overcome the limit of conventional materials. Various application areas are possible for carbon nanotube reinforced nanocomposites through the functionalization of carbon nanotubes. Carbon nanotube reinforced polymer matrix nanocomposites have been fabricated by liquid phase process including surface functionalization and dispersion of CNTs within organic solvent. In case of carbon nanotube reinforced polymer matrix nanocomposites, the mechanical strength and electrical conducting can be improved by more than an order of magnitude. The carbon nanotube reinforced polymer matrix nanocomposites can be applied to high strength polymers, conductive polymers, optical limiters and EMI materials. In spite of successful development of carbon nanotube reinforced polymer matrix nanocomposites, the researches on carbon nanotube reinforced inorganic matrix nanocomposites show limitations due to a difficulty in homogeneous distribution of carbon nanotubes within inorganic matrix. Therefore, the enhancement of carbon nanotube reinforced inorganic nanocomposites is under investigation to maximize the excellent properties of carbon nanotubes. To overcome the current limitations, novel processes, including intensive milling process, sol-gel process, in-situ process and spark plasma sintering of nanocomposite powders are being investigated. In this presentation, current research status on carbon nanotube reinforced nanocomposites with various matrices are reviewed.

• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.101-107
• /
• 2007

Ultrasonic-milling of metal oxide nanopowders for the preparation of tungsten heavy alloys was investigated. Milling time was selected as a major process variable. XRD results of metal oxide nanopowders ultrasonic-milled for 50 h and 100 h showed that agglomerate size reduced with increasing milling time and there was no evidence of contamination or change of composition by impurities. It was found that nanocomposite powders reduced at $800^{\circ}C$ in a hydrogen atmosphere showed a chemical composition of 93.1W-4.9Ni-2.0Fe from EDS analysis. Hardness of sintered part using 50 h and 100 h powder samples was 399 Hv and 463 Hv, respectively, which is higher than the that of commercial products (330-340 Hv).

• Journal of Magnetics
• /
• v.3 no.1
• /
• pp.4-8
• /
• 1998

Two different compositions of melt spun magnetic alloys, $ Nd_4Fe_{80}B_{16} and Nd_4Fe_{76}Co}\_3Hf_{0.5}Ga_{0.5}B_{16},$ were characterized in terms of magnetic properties and thermal behaviors. It was found that the addition of Hf and Ga effectively slow down the crystallization rate of the nanocomposite $ Nd_2Fe_{14}B/Fe_3B$ magnet. Coercivity(iHc) changes only slightly with varying the post annealing conditions confirming that iHc is not a sensitive magnetic quantity as a function of grain size and exchange coupled interaction. The experimentally observed behaviors of Mr and Hc do not vary monotonously with in-creasing grain size which is not in agreement with the numerically calculated result near the critical grain size (dc). The plot of the grain size dependence for the remanence and coercivity in isotrop!c nanocomposite magnets has been revised in this study. The maxium energy product, $(B, H)_{max}$ =15.34 MGOe, and a reduced remanence, Mr/Ms=0.84 were obtained, respectively.