• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.861-864
• /
• 2004

본 연구에서는 Ta이 도핑된 $TiO_2$와 $Au/TiO_2$ nanocomposite 박막을 co-sputtering법으로 제작하였다. Ta-doped $TiO_2$ 박막은 금흥석(rutile)에서 아나타제 상으로 변하는 구조를 유도하는 고용체를 형성했다. $Au/TiO_2$ nanocomposite film의 경우에는, 지름이 약 15 nm인 Au particles들이 $TiO_2$ matrix에 균질하게 분포되었다. Ta가 도핑된 $TiO_2$ 전극과 $Au/TiO_2$ 나노 콤포사이트 전극의 anodic photocurrents가 UV뿐만 아니라 가시광선 영역에서도 관찰되었다. Ta이 도핑된 $TiO_2$ 전극과 $Au/TiO_2$ 나노 콤포사이트 사이의 가시광선 영역에서 photoresponse는 계면 상태로 부터의 bandgap의 감소와 전자의 photoexcitation 때문이다.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.666-671
• /
• 2009

Water repellent elastomeric surfaces were fabricated successfully on SBS/MWNT nanocomposites films using the breath figure method and subsequent thermal treatment. The uniformly dispersed CNTs were found to play significant roles in tuning the size and ordering of the macroporous morphology at the nanocomposite surface as well as enhancing the mechanical properties of nanocomposites. In particular, the CNTs dispersed in a nanocomposite solution retarded the coarsening process of aqueous droplets during the breath figure process and decreased the pore size in the finally fabricated film. The water contact angle measurement showed that the double-scale structure comprised of self-organized macropores and surface the roughness induced by a thermal treatment produced a highly water-repellent nanocomposite surface.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.105-108
• /
• 2002

Polyimide-epoxysilane (coupling agent) composites were reacted with oligomeric PDMS, a condensation product of difunctional silane, by a sol-gel process and were then dried into films. And then, the surface, mechanical, and electric properties were measured. The study showed that PDMS existed in the polyimlde matrix by the use of FT-IR. In the mechanical properties, the maximum elongation and toughness was increased in the polyimide with silane-groups. But the maximum tensile strength was slightly decreased. And the intensive dispersion of the silane-groups on the surface of polyimide was ascertained through XPS measurement. In the electric properties, AC break down voltage was increased by increasing the amount of difunctional silane. This experiment showed that PDMS added polyimide had better mechanical and electric properties than classical materials.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.341-346
• /
• 2008

Cellulose nanofibers from microfibril cellulose (MFC) was prepared by hydrobromic acid (HBr) treatment at different concentrations. Polyvinyl alcohol (PVA) composite films at various loading level of nanofibers were manufactured by a film casting method. The analysis of degree of polymerization (DP), crystallinity ($X_c$) and molecular weight ($M_w$) of cellulose after acid treatment was conducted. The mechanical and thermal properties of the cellulose nanofibers reinforced PVA films were characterized using tensile tests and thermogravimetric analysis (TGA). The DP and $M_w$ of MFC by HBr hydrolysis considerably decreased, but $X_c$ showed no significant change. After acid hydrolysis, the diameter of cellulose nanofibers was in the range of 100 to 200 nm. The thermal stability of the films was steadily improved with the increase of nanofiber loading. There was a significant increase in the tensile strength of PVA composite films with the increase in MFC loading. Finally, 5 wt.% nanofiber loading exhibited the highest tensile strength and thermal stability of PVA composite films.

• 폴리머
• /
• 제31권5호
• /
• pp.428-435
• /
• 2007

종류가 다른 두 가지 유기화 점토를 사용하여 얻은 초고분자량 폴리에틸렌(UHMWPE) 나노복합재료의 열적, 기계적 성질 및 기체 투과도를 서로 비교하였다. UHMWPE 복합체 필름을 얻기 위해 유기화 점토로는 헥사메틸렌 벤즈이미다졸-마이카($C_{16}BIMD-Mica$)와 Cloisite 25A가 사용되었다. 용액 삽입법을 이용하여 UHMWPE에 여러 다른 농도의 유기화 점토를 분산시켜 나노 크기의 복합재료를 합성하였다. 투과 전자 현미경(TEM)을 이용하여 비록 일부는 뭉쳐진 점토의 형태를 나타내었지만 한편으로는 점토가 나노 크기로 고루 분산되었음을 확인하였다. 약간의 유기화 점토 첨가(1-3 wt%) 만으로도 순수한 UHMWPE에 비해서 나노복합재료의 열적, 기계적 성질 및 기체투과도 성질이 높아짐을 알았다. 또한 전체적으로는 첨가된 두가지 유기화 점토 모두 적당한 농도에서 UHMWPE의 물성 증가에 큰 효과가 있었으며, 매트릭스 고분자에 사용된 두 가지 충전제중 Cloisite 25A가 $C_{16}BIMD-Mica$ 보다더 우수한 물성을 보였다.

• 접착 및 계면
• /
• 제5권1호
• /
• pp.29-35
• /
• 2004

친유기 합성 층상실리케이트(STN)의 함량(1~9 wt%)을 변화하며 폴리아믹산/STN 나노복합재용액을 DMAc 및 THF/MeOH 혼합용매에서 각각 제조하였고, 이를 폴리에스테르 필름에 코팅하여 열적 이미드화 및 화학적 이미드화 반응을 통하여 폴리에스테르/폴리이미드 나노복합필름을 제조하였다. XRD 및 TEM을 이용하여 제조된 폴리에스테르/폴리이미드 나노복합필름의 미세 구조를 조사한 결과 박리형 폴리이미드 나노복합재가 제조되었음을 확인하였다. 표면의 모폴로지 변화는 AFM을 통하여 확인하였으며, 열적 및 기계적 특성은 TGA, DMA와 UTM을 통하여 측정하였다. 또한 STN이 첨가됨에 따라 폴리에스테르/폴리이미드 나노복합필름의 수분투과도는 감소하였고, 화학적 이미드화에 의해 제조된 필름이 열적 이미드화에 의한 필름에 비해 좀더 우수한 수분 차단성을 보였다. 또한 상대적으로 비점이 낮은 THF/MeOH 혼합용매 시스템의 경우가 DMAc를 용매로 사용한 경우보다 더 향상된 수분 차단성을 보였다.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.122-127
• /
• 2003

Ti - Si - N hard films were deposited on SKD11 steel substrates by a hybrid deposition system, where TiN was deposited by AIP method while Si was incorporated by sputtering one. The microstructure of Ti-Si-N films was revealed to be a composite of TiN crystallites and amorphous Si3N4 by instrumental analyses. The highest hardness value of about 45 Gpa was obtained at the Si content of around 7.7 at.%. With increase of Si content, the size of TiN crystallites was reduced and their distribution was changed from aligned to randomly orientated states. Surface roughness of Ti-Si-N film also decreased with increase of Si content.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.357-362
• /
• 2007

Polyimide/carbon nanotube (CNT) composite films, for potential use in high performance microelectronics and aerospace applications, were prepared by mixing a polyisoimide (PII) solution and a CNT suspension in NMP, followed by casting, evaporation and thermal imidization. The CNTs were modified by a nitric acid treatment to improve the thermal and electrical properties, as well as to provide good dispersion of the CNTs in a polymer matrix. The formation of functional groups on the modified CNT was confirmed by Raman spectroscopy. Scanning electron microscopy revealed the modified CNTs to be well dispersed in the polyimide matrix, with a uniform diameter of ca. 50 nm. The thermal stability of the films containing the CNTs was improved due to the enhanced interfacial interaction and good dispersion between the polyimide matrix and modified CNTs. In addition, the thermal expansion coefficient of the composites films was slightly decreased, but the dielectric constants increased linearly with increasing CNT content.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.301-307
• /
• 2018

The current study fabricated magnetic functional reduced graphene oxide (MFRGO) by relying on ${FeCl_4}^-$ magnetic anion confined to cationic 1-methyl imidazolium. Furthermore, for improving the electrochemical performance of conductive polymer, hybrid poly ortho aminophenol (POAP)/ MFRGO films have then been fabricated by POAP electropolymerization in the presence of MFRGO nanorods as active electrodes for electrochemical supercapacitors. Surface and electrochemical analyses have been used for characterization of MFRGO and POAP/ MFRGO composite films. Different electrochemical methods including galvanostatic charge discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy have been applied to study the system performance. Prepared composite film exhibited a significantly high specific capacity, high rate capability and excellent cycling stability (capacitance retention of ~91% even after 1000 cycles). These results suggest that electrosynthesized composite films are a promising electrode material for energy storage applications in high-performance pseudocapacitors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.