• 한국표면공학회지
• /
• 제49권3호
• /
• pp.260-264
• /
• 2016

In this study, fractured surface morphology and mechanical properties of Ni-Cr-Mo alloys with various contents of Mo for dental material use have been evaluated by mechanical test. The alloys used were Ni-13Cr-xMo alloys with Mo contents of 4, 6, 8, and 10 wt.%, prepared by using a vacuum arc-melting furnace. Ni-13Cr-xMo alloys were used for mechanical test without heat treatment. The phase and microstructure of alloys using an X-ray diffraction (XRD) and optical microscopy (OM) were evaluated. To examine the mechanical properties of alloys according to microstructure changes, the tensile test and the hardness test were carried out using tensile tester. To understand the mechanism of Mo addition to Ni-Cr alloy on mechanical property, the morphology and fractured surfaces of alloys were investigated by field-emission scanning electron microscope (FE-SEM). As a result, 79Ni-13Cr-8Mo alloy was verified that the tensile strength and the hardness were better than others. Varying Mo content, the changes of microstructures of alloys were identified by OM and SEM and that of 79Ni-13Cr-8Mo alloy was proved fabricated well. Microstructures of alloys were changed depending on Mo content ratio. It has been observed that 8% alloy had the most suitable mechanical property for dental alloy.

• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.13-16
• /
• 2003

Mn-doped $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film phosphors have been grown using a pulsed laser deposition technique under various growth conditions. The structural characterization carr~ed out on a series of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) films grown on MgO(l00) substrates usmg Zn-rich ceramic targets. Oxygen pressure was varied from 50 to 200 mTorr and Zn/Ga ratio was the function of oxygen pressure. XRD patterns showed that the lattice constants of the $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film decrease with the substitution of sulfur and selenium for the oxygen in the $ZnGa_2O_4$. Measurements of photoluminescence (PL) properties of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin films have indicated that MgO(100) is one of the most promised substrates for the growth of high quality $ZnGa_2O_{4-x}M_{x}$:$Mn^{2+}$ (M=S, Se) thin films. In particular, the incorporation of Sulfur or Selenium into $ZnGa_2O_4$ lattice could induce a remarkable increase in the intensity of PL. The increasing of green emission intensity was observed with $ZnGa_2O_{3.925}Se_{0.075}:$Mn^{2+}$ and $ZnGa_2O_{3.925}S_{0.05}$:$Mn^{2+}$ films, whose brightness was increased by a factor of 3.1 and 1.4 in comparison with that of $ZnGa_{2}O_{4}$:$Mn^{2+}$ films, respectively. These phosphors may promise for application to the flat panel displays.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.692-697
• /
• 2006

Deodorization of natural zeolites have been improved not only for polar but also for non-polar pollutants by sucessive ion exchanges of H and Ag ions starting from Korean natural zeolite with high adsorption capacity. The modified zeolites with $TiO_2$ coating on the surface revealed high deodorization and photocatalytic decomposition effects. Further modification was made with $10{\sim}20nm$ silica nano particles coating on the surface, the resulting composite particles of $SiO_2/TiO_2/modified$ natural zeolite revealed not only comparable deodorization but also better durability and resisatnce to color change compared to the $TiO_2$/modified natural zeolite without much compensation of photocatalytic decomposition effect, when the composite particles were exposed to the polypropylene non-woven fiber coated with organic binder. It is expected for the composite particle prepared here to be used as indoor building materials for indoor air quality control.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.241-256
• /
• 2018

Objectives: This study aimed to review the characteristics of three-dimensional printing technology focusing on printing types, materials, and health hazards. We discussed the methodologies for exposure assessment on hazardous substances emitted from 3D printing through article reviews. Methods: Previous researches on 3D printing technology and exposure assessment were collected through a literature review of public reports and research articles reported up to July 2018. We mainly focused on introducing the technologies, printing materials, hazardous emissions during 3D printing, and the methodologies for evaluation. Results: 3D printing technologies can be categorized by laminating type. Fused deposition modeling(FDM) is the most widely used, and most studies have conducted exposure assessment using this type. The printing materials involved were diverse, including plastic polymer, metal, resin, and more. In the FDM types, the most commonly used material was polymers, such as acrylonitrile-butadiene-styrene(ABS) and polylactic acids(PLA). These materials are operated under high-temperature conditions, so high levels of ultrafine particles(mainly nanoparticle size) and chemical compounds such as organic compounds, aldehydes, and toxic gases were identified as being emitted during 3D printing. Conclusions: Personal desktop 3D printers are widely used and expected to be constantly distributed in the future. In particular, hazardous emissions, including nano sized particles and various thermal byproducts, can be released under operation at high temperatures, so it is important to identify the health effects by emissions from 3D printing. Furthermore, appropriate control strategies should be also considered for 3D printing technology.

• 공업화학
• /
• 제23권2호
• /
• pp.169-175
• /
• 2012

본 연구에서는 $130{\sim}150^{\circ}C$ 어닐링조건과 1~10 wt%의 isopropylphenyl diphenyl phosphate (IPPP) 첨가량이 PLA필름의 결정화거동과 방염특성에 미치는 영향을 평가하였다. IPPP를 1, 5, 10 wt% 첨가한 PLA필름은 $140^{\circ}C$에서 결정화속도가 가장 빨랐으며 등온조건에서는 1 wt% IPPP를 첨가한 PLA필름의 결정화속도가 5, 10 wt%의 IPPP를 첨가한 PLA필름보다 빨랐다. IPPP를 1 wt% 첨가한 PLA필름의 평균 결정화도는 21.3%이며 평균 결정크기는 24.8 nm였다. IPPP의 첨가량이 증가할수록 결정화도는 증가하고 결정크기는 작아졌다. 또 연소속도는 IPPP의 첨가량이 증가할수록 낮아졌다.

• 공업화학
• /
• 제25권3호
• /
• pp.286-291
• /
• 2014

본 연구에서는 기체 분리를 위한 제올라이트 세라믹 멤브레인 제조에 적합한 입자크기와 형상을 갖춘 나노크기의 제올라이트를 TPAOH : $SiO_2$ : $H_2O$의 적합한 조성으로 합성하였으며 그 특성을 분석하였다. 실리카 원으로는 TEOS, LUDOX AS-40, CAB-O-SIL을 사용하고, TPAOH와 함께 출발물질로 하여 특정 조성의 TPAOH, $SiO_2$, $H_2O$ gel을 합성하고, $NaH_2PO_4$ 및 다양한 산 염기를 결정화 촉진제로 사용하였다. 합성시간을 단축할 수 있는 방법의 일환으로 저온에서 2단계 온도 변화법을 적용한 수열합성법으로 TPA-Silicalite-1을 합성하였으며 XRD, SEM, BET, TGA 등을 사용하여 분석하였다. 그 결과, 2단계 온도 변화법을 사용하고, 결정화 촉진제로서 $NaH_2PO_4$를 사용하였을 때가 최적의 합성 조건으로 입자크기100 nm, 비표면적 $416m^2/g$의 TPA-Silicalite-1 분말을 제조할 수 있었다.

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1254-1260
• /
• 2008

The aim of the present study was to prepare nanosample of fucoidan using lecithin as encapsulated material and to investigate the anticancer and immunomodulatory activity of nanoparticle in vitro. The nanoparticles have been characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Confocal microscopy confirmed the internalization of the fucoidan conjugates into the immune cells. The uptake of nanoparticles was confirmed with confocal microscopy demonstrating their localization in the cells. The anticancer activity was increased over 5-10% in different cancer cells of fucoidan nanoparticle as compare with fucoidan. The human B and T cells growth and the secretion of interleukin-6 and tumor necrosis factor-a from B cell were also improved by fucoidan nanoparticle because of the rapid absorption of nanoparticle into the cells as compare to fucoidan. At 0.6 mg/mL concentrations, the fucoidan nanoparticle showed better activity than 1.0 mg/mL concentration in T cell growth because the cells reached their saturation capacity. When the fucoidan was encapsulated in lecithin, its anticancer as well as its immunomodulatory activity proved to be superior from that of itself in pure form.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• Advances in nano research
• /
• 제8권1호
• /
• pp.83-94
• /
• 2020

An analytical formulation and solution process for the buckling analysis of porous magneto-electro-elastic functionally graded (MEE-FG) beam via different thermal loadings and various boundary conditions is suggested in this paper. Magneto electro mechanical coupling properties of FGM beam are taken to vary via the thickness direction of beam. The rule of power-law is changed to consider inclusion of porosity according to even and uneven distribution. Pores possibly occur inside FGMs due the result of technical problems that lead to creation of micro-voids in these materials. Change in pores along the thickness direction stimulates the mechanical and physical properties. Four-variable tangential-exponential refined theory is employed to derive the governing equations and boundary conditions of porous FGM beam under magneto-electrical field via Hamilton's principle. An analytical model procedure is adopted to achieve the non-dimensional buckling load of porous FG beam exposed to magneto-electrical field with various boundary conditions. In order to evaluate the influence of thermal loadings, material graduation exponent, coefficient of porosity, porosity distribution, magnetic potential, electric voltage and boundary conditions on the critical buckling temperature of the beam made of magneto electro elastic FG materials with porosities a parametric study is presented. It is concluded that these parameters play remarkable roles on the buckling behavior of porous MEE-FG beam. The results for simpler states are proved for exactness with known data in the literature. The proposed numerical results can serve as benchmarks for future analyses of MEE-FG beam with porosity phases.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.159-163
• /
• 2012

A TCO-less ruthenium (Ru) catalytic layer on glass substrate instead of conventional Ru/TCO/ glass substrate was assessed as counter electrode (CE) material in dye sensitized solar cells (DSSCs) by examining the effect of the Ru thickness on the DSSC performance. Ru films with different thicknesses (34, 46, 69, and 90 nm) were deposited by atomic layer deposition (ALD) on glass substrates to replace both existing catalyst and electrode layer. In order to make our comparison, we also prepared an Ru catalytic layer by a similar method on FTO/glass substrate. Finally, we prepared the $0.45cm^2$ DSSC device the properties of the DSSCs were examined by cyclic voltammetry (CV), impedance spectroscopy (EIS), and current-voltage (I-V) method. CV measurements revealed an increase in catalytic activity with increasing film thickness. The charge transfer resistance at the interface between the electrolyte and Rudecreased with increasing Ru thickness. I-V results showed that the energy conversion efficiency increased up to 1.96%. Our results imply that TCO-less Ru/glass might perform as both catalyst and electrode layer when it is used in counter electrodes in DSSCs.