• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.978-980
• /
• 2004

We report the preparation and properties of polymer paste solutions with CNTs using conventional paste forming process. Electrospinning has been used for the fabrication of nano-fiber composite. In this process, dispersion of CNTs is very important matter. So, we emphasize the necessity of dispersion of CNTs in the solution and investigate effects of process parameters of electrospinning. The advantage of simple electrospinning process will be discussed..

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.7-14
• /
• 2008

탄소나노튜브는 전기적, 기계적, 열적 특성면에서 모두 탁월한 물성을 나타냄에 따라 복합체 분야에서 가장 이상적인 나노충전재료로 여겨지고 있다. 그에 따라 탄소나노튜브 복합체는 전도성재료, 고강도 경량 특성의 구조재료, 다기능 복합재료 등의 응용에 있어서 그 활용도가 높아지고 있다. 본 총설에서는 탄소나노튜브의 제조방법, 개질, 탄소나노튜브 복합체의 다양한 특성 및 응용 분야에 대한 최근 연구 동향을 설명하고 탄소나노튜브 복합체 상업화에 있어서 앞으로 나아갈 방향에 대하여 다룬다.

• Advances in nano research
• /
• 제10권4호
• /
• pp.327-337
• /
• 2021

In this review, composite structures are used for many industries for at least four decades. Polymeric composites are one of the important structures in the aerospace and aviation industry because of their high strength and low weight. In this comprehensive review, mechanical behaviors, physical and mechanical properties of polymeric composites, different types of reinforcements, different methods to fabricate polymeric composites, historical structural composite materials for aviation and aerospace industries, and also different methods for the characterization are reported. How to use various methods of composite preparation using different nanofillers as reinforcements and its effect on the physical properties and mechanical behavior of composites are discussed as well.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.101-105
• /
• 2006

본 연구에서는 planetary milling을 사용하여 Ti 분말과 $Si_3N_4$와의 반응이 일어나도록 하여 nano $TiN_x$을 제조하였다. 이렇게 얻어진 분말은 Ti 분말과 혼합하여 SPS 소결 장치를 이용하여 소결하였으며 이 소결체의 고온에서의 경도변화를 조사하기위해 $850^{\circ}C$에서 열처리하였다. 분말의 물성평가는 X선 회절분석을 통해 결정상의 변화를 분석하였으며, 그 결과 milling 시간이 10시간의 milling에서는 $TiN_{0.26}$과 TiN이 혼재되어 있으며 20시간의 milling에서는 주로 TiN이 생성되는 것으로 확인되었다. 제조된 분말의 표면관찰을 통해서는 milling 시간이 증가할 수로 입자표면에 새로 형성된 반응물 size 분포를 조사하였으며, milling 시간이 길수록 입자표면의 $TiN_x$ 입자의 사이즈가 $10{\sim}20nm$ 정도로 작아지는 것을 알 수 있었다. Ti와 $TiN_x$를 중량비로 50:50로 혼합하여 제조한 소결체의 경도는 마이크로비커스 경도 값으로 $1050kgf/mm^2$ 정도를 나타내었다.

• 대한화학회지
• /
• 제54권1호
• /
• pp.137-141
• /
• 2010

일반적으로 고분자 재질은 표면이 수분을 배척하는 소수성이며 또한 통기성이 좋지 못하다. 이러한 물성을 개질하기 위하여 고분자 플라스틱에 기능성 충전제로 친수성인 세라믹 입자와 항균입자를 혼합하여 친수성, 통기성 및 항균성이 향상 된 복합재료를 제조하였으며 표면 접촉각 측정, 공기투과시간 측정, 항균효과 관찰을 통해 물성을 확인하였다. 이러한 복합 재료는 건강관련 제품에 널리 이용될 수 있다.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.504-509
• /
• 2009

The Zr-based bulk metallic glass matrix composites of a mixture of gas-atomized metallic glass powders and Fe-based nanostructured powders were fabricated by spark plasma sintering. The Fe-based nanostructured powders adopted for the enhancement of plasticity were well distributed in the matrix after consolidation, and the matrix remains as a fully amorphous phase. The successful consolidation of metallic glass matrix composite with high density was attributed to viscous flow in the supercooled liquid state during spark plasma sintering. Unlike other amorphous matrix composites, in which improved ductility could be obtained at the expense of their strength, the developed composite exhibited improvement both in strength and ductility. The ductility improvement in the composite was considered to be due to the formation of multiple shear bands under the presence of the Fe-based nanostructured particles.

• 공업화학
• /
• 제18권4호
• /
• pp.396-399
• /
• 2007

본 연구에서는 질산은 용액을 감마선 조사에 의하여 은나노 입자를 제조한 후, 이것을 활성탄과 혼합하여 은/활성탄 복합체를 제조하여 대장균에 대한 항균특성을 조사하였다. 제조된 은/활성탄 복합체의 특성은 주사전자현미경, X-선 회절법 그리고 원자흡수분광법에 의해 알아보았다. 은/활성탄 복합체의 대장균에 대한 억제농도는 0.387 ppm으로 나타났으며 대장균에 대한 사멸농도는 1.017 ppm이었다. 이 결과로 은/활성탄 복합체의 대장균에 대한 우수한 항균효과를 확인할 수 있었다.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.162-168
• /
• 2014

The friction and wear characteristics of the rubber matrix composites filled with nano sized silica particles were investigated at ambient temperature by pin-on-disc friction test. The volume fraction of silica particles was 19%. The cumulative wear volume and wear rate of these materials on counterpart roughness were determined experimentally. The major failure mechanisms were lapping layers, deformation of matrix, ploughing, debonding of particles, fracture of particles and microcracking by scanning electric microscopy photograph of the tested surface. The cumulative wear volume showed a tendency to increase with increase of sliding distance. The wear rate of these composites tested indicated low value as increasing the sliding distance.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.278-285
• /
• 2021

This study produces electroconductive polycaprolactone (PCL)-based film with different amounts of graphene (G) through electrospinning, and the characteristics of the produced G/PCL composites are investigated. The G/PCL results are analyzed by comparing them with those obtained using pure PCL electrospun film as a control. The morphology of electrospun material is analyzed through scanning electron microscopy and transmission electron microscopy. Mechanical and electrical properties are also evaluated. Composites containing 1 % graphene have the highest elongation rate, and 5 % samples have the highest strength and elasticity. Graphene contents > 25 % show electro-conductivity, which level improves with increase of graphene content. Biological characteristics of G/PCL composites are assessed through behavioral analysis of neural cell attachment and proliferation. Cell experiments reveal that compositions < 50 % show slightly reduced cell viability. Moreover, graphene combinations facilitated cell proliferation compared to pure PCL. These results confirm that a 25 % G/PCL composition is best for application to systems that introduce external stimuli such as electric fields and electrodes to lead to synergistic efficiency of tissue regeneration.

• Nano
• /
• 제13권10호
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.