• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1195-1198
• /
• 2005

The improvement of efficiency is the one of the most important part in AC PDPs . To achieve high efficiency, high VUV emission efficiency and High ion induces secondary electron emission coefficient are needed. We have measured the emission spectra of vacuum ultraviolet rays and ion induced secondary electron emission coefficient of MgO protective layer in surface discharge AC-PDP with binary and ternary gas mixtures. We have investigated electro-optical characteristics of AC-PDPs to optimum gas mixture for high efficient.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 2012

The Faraday cup electrode of different size has been developed and evaluated to investigate the diffusion effect of particles by Brownian motion in a particle beam mass spectrometer(PBMS). Particles which focused and accelerated by aerodynamic lens are charged to saturation in an electron beam, and then deflected electrostatically into a Faraday cup detector for measurement of the particle current. The concentration of particles is converted from currents detected by Faraday cup. Measurements of particle current as a function of deflection voltage are combined with measured relationships between particle velocity and diameter, charge and diameter, and mass and diameter, to determine the particle size distribution. The particle currents were measured using 5, 10, 20, 40 mm sized Faraday cup that can be move to one direction by motion shaft. The current difference for each sizes as a function of position was compared to figure out diffusion effect during transport. Polystyrene latex(PSL) 100, 200 nm sized standard particles were used for evaluation. The measurement using 5 mm sized Faraday cup has the highest resolution in a diffusion distance and the smaller particles had widely diffused.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.201-203
• /
• 2005

A kinetic model for particle coarsening behavior in the weld heat affected zone (HAZ) was proposed. Unlike the conventional approach, where the mean-sized particle is considered to grow continuously, the proposed model considered the critical particle size which can be derived from the Gibbs-Thomson equation. In this study, the proposed particle coarsening model was applied to study the behavior of (Ti, Nb )(C, N) complex particle in the weld HAZ. The predicted particle size distributions using the proposed model were in agreement with the experimental results.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.82-95
• /
• 1989

This study was carried out for the stability analysis of earth dam by the variation of compaction density. The test samples were taken from five kinds of soil used for banking material and the degree of compaction for this samples were chosen 100, 95, 90, 85, and 80 percent. The stability problems were analysed by the settlement and camber( extra banking) of dam, strength parameter and dam slope, and coefficient of permeability and seapage flow through dam body. The results of the stability analysis of earth dam are as follows. 1. The more the fine particle increases and lower the compaction degree becomes, the lower the preconsolidation load becomes but the compression index becomes higher. 2. Sixty to eighty percent of settlement of dam occurs during the construction period and the settlement ratio after completion of dam is inversly proportional to the degree of compaction. 3. The camber of dam has heigher value in condition that it has more fine particle(N) and heigher dam height(H) with the relation of H= e(aN-bH-e). 4. The cohesion(C) decreases in proportion to compaction degree(D) and fine particle(N) with the relation of C= aD+ bN-c, but the internal friction angle is almost constant regardless of change of degree of compaction. 5. In fine soil, strength parameter from triaxial compression test is smaller than that from direct shear test but, they are almost same in coarse soil regardless of the test method. 6. The safety factor of the dam slope generally decreases in proportion to cohesion and degree of compaction but, in case of coarse soil, it is less related to the degree of compaction and is mainly afected by internal friction angle. 7. Soil permeability(K) decreases by the increases of the degree of compaction and fine particle with relation of K=e(a-bl)-cN) 8. The more compaction thickness is, the less vertical permeability (Kv) is but the more h6rzontal permeability (KH) is, and ratio of Kv versus KH is largest in range from 85 to 90 percent of degree of corn paction. 9. With the compaction more than 85 percent and coefficient of permeability less than ${\alpha}$X 10-$^3$cm/sec, the earth dam is generally safe from the piping action.

• 대한산업공학회지
• /
• 제35권2호
• /
• pp.150-159
• /
• 2009

The heterogeneous fleet vehicle routing problem(HVRP) is a variant of the classical vehicle routing problem in which customers are served by a heterogeneous fleet of vehicles with various capacities, fixed costs and variable costs. We propose a new conceptual HVRPCR(HVRP with customer restriction) model including additional customer restrictions in HVRP. In this paper, we develop hybrid particle swarm optimization(HPSO) algorithm with 2-opt and node exchange technique for HVRP. The solution representation is a n-dimensional particle for HVRP with N customers. The decoding method for this representation starts with the transformation of particle into a priority list of customer to enter route and limit of vehicle to serve each customer. The vehicle routes are then constructed based on the customer priority list and limit of vehicle to serve. The proposed algorithm is tested using 8 benchmark problems and it consistently produces high-quality solutions, including new best solutions. The numerical results show that the proposed algorithm is robust and efficient.

• Molecules and Cells
• /
• 제41권4호
• /
• pp.271-281
• /
• 2018

IFIT1 (also known as ISG56) is a member of the interferon-inducible protein with tetratricopeptide repeats (IFITs) family. IFITs are strongly induced by type I interferon (IFN), double-stranded RNA and virus infection. Here, we investigated IFIT1 expression in human umbilical vein endothelial cells (HUVECs) and in human bronchus epithelial cells (BEAS-2Bs) induced by the H9N2 virus and inactivated viral particle at different time points. We also investigated the effect of H9N2 virus and viral particle infection on $IFN-{\alpha}/{\beta}$ production, and assessed whether hemagglutinin or neuraminidase protein induced IFIT1 expression. Results showed that both H9N2 virus infection and viral particle inoculation induced the expression of IFIT1 at mRNA and protein levels in the two cell lines. Hemagglutinin or neuraminidase protein binding alone is not sufficient to induce IFIT1 expression. Surprisingly, the expression patterns of IFIT1 in response to H9N2 virus and viral particles in the two cell lines were opposite, and production kinetics of $IFN-{\alpha}/{\beta}$ also differed. An additional finding was that induction of IFIT1 in response to H9N2 virus infection or viral particle inoculation was more sensitive in HUVECs than in BEAS-2Bs. Our data offers new insight into the innate immune response of endothelial cells to H9N2 virus infection.

• 청정기술
• /
• 제11권1호
• /
• pp.1-12
• /
• 2005

본 연구는 모노머로 메틸메타 아크릴레이트와 노말부틸 아크릴레이트를 사용하여 수용액상에서 반연속식 유화중합을 실시하여 안정성이 우수한 폴리머 시멘트용 아크릴계 폴리머 에멀젼을 제조하기 위해 최종 폴리머 에멀젼의 평균 입자크기 및 농도에 관한 계면활성제의 영향을 고찰하였다. 실험결과, 사용한 비이온 계면활성제에 관한 폴리머 에멀젼의 농도는 LE-50, NP-50 > CE-50, Tween 20 > TX-405 > Brij 35 순으로 최종 폴리머 응석에 기인하여 낮아졌으며, 평균 입자크기도 작아지는 경향을 나타내었다. 또한 LE형과 NP형 비이온 계면활성제는 친수성 체인의 길이(n)가 증가할 수 록 응석의 발생이 거의 없는 안정한 폴리머 에멀젼을 얻을 수 있었으며, n = 30이상의 체인에서 평균입자크기는 250 - 320 nm, 폴리머 농도는 수용액 기준으로 40 %를 얻을 수 있었다. 반응초기에 반응기에 투입 (Initial reactor charge)한 계면활성제 종류의 영향은 음이온 계면활성제인 SDS를 사용한 경우에는 사용량에 무관하게 폴리머 에멀젼의 농도는 거의 일정하였으나, 양이온 계면활성제인 CTAB와 반응형 계면활성제인 HN-100의 경우에는 폴리머 에멀젼 농도가 낮아지는 경향을 나타내었다. 반면에 평균 입자크기는 SDS < CTAB < HN-100 순으로 커지는 경향이었다.

• 한국광물학회지
• /
• 제15권2호
• /
• pp.95-103
• /
• 2002

본 연구는 일라이트-스멕타이트 혼합층광물(I-S)의 구조를 MacEwan 결정자 모델과 기본입자 모델을 통하여 살펴봄으로써, 팽창성(% $S_{XRD}$), MacEwan 결정자두께( $N_{CSD}$), 평균기본입자두께( $N_{F}$ ) 간의 관계를 정량적으로 해석하고자 하였다. 두 모델에 대한 비교를 통하여, % $S_{XRD}$, $N_{CSD}$, $N_{F}$ 는 서로 독립된 변수들이 아니고 I-S 구조 내에서 특정한 기하학적 관계를 가지고 있음을 알 수 있었다. % $S_{XRD}$는 단범위적층효과에 의해 $N_{CSD}$에 영향을 받고, $N_{F}$ 및 스멕타이트 층간개수( $N_{S}$ )와 $N_{s}$ =( $N_{F-}$1)/(100%/% $S_{XRD-}$ $N_{F}$ ) 관계가 성립함을 알 수 있었다. 특히, 이 관계로부터 % $S_{XRD}$와 $N_{F}$ 는 물리적으로 제한된 조건인 1< $N_{F}$ <100%/ % $S_{XRD}$를 만족해야 한다는 결과를 도출할 수 있었다. 본 연구는 이러한 물리적 제한조건을 이용하여, % $S_{XRD}$, $N_{F}$ , $N_{s}$ , 질서도 등을 종합적으로 해석하는데 유용할 것으로 사료되는 다이어그램을 제시하였으며, 금성산화 산암복합체에서 산출되는 I-S에 대한 XRD 자료를 이용하여, 이를 검증하였다. 또한, 자연상 I-S는 % $S_{XRD}$가 감소할수록, $N_{F}$ 는 물리적 상한조건인 $N_{F}$ =100%/% $S_{XRD}$에서 점차 멀어지게 됨을 알 수 있었으며, 이러한 결과는 기본입자가 두꺼워질수록 적층능력이 감소하는 것에서 기인한 것으로 사료된다.다.하는 것에서 기인한 것으로 사료된다.다.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.392-398
• /
• 1996

$Si_{3}N_{4}$에 평균입경이 다른 SiC 분말을 0, 10, 20, 30, 40 vol% 첨가하여 고온가압소결법으로 초미립복합재료를 제조하였다. SiC의 첨가량에 따라 $Si_{3}N_{4}$의 결정립성장이 억제되어 원형의 미세한 결정립들이 많아졌다. 이러한 경향은 평균입경이 작은 SiC를 사용한 조성에서 현저하게 나타났다. 이에 따라 파괴강도와 경도는 작은 SiC를 첨가한 시편에서 높은 값을 나타냈으며, 파괴인성은 낮았다.