• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.117-117
• /
• 2010

나노입자 제조 기술이 점차 발전하면서 금속산화물, 반도체용 및 태양전지용, 신소재 등 다양한 응용분야에 사용하고 있다. 따라서 이와 같은 나노입자 제조방법으로는 펄스 레이저 용사법(pulsed laser ablation), 플라즈마 아크 합성법(plasma arc synthesis), 열분해법(pyrolysis), plasma-enhanced chemical vapor deposition (PECVD)법 등과 같은 기상공정이 많이 사용되고 있다. 기상공정은 기존의 공정에 비해 고순도 입자의 대량 생산, 다성분 입자의 화학적 균질성 유지, 비교적 간단하고 깨끗한 공정 등의 장점을 가지고 있다. 기상공정에서 일반적인 입자 형성 메커니즘은 기체 상태의 화학 물질이 물리적 공정 혹은 화학 반응에 의해 과포화상태에 도달하게 되며, 이 때 동질 핵생성(homogeneous nucleation)이 일어나고 생성된 핵(nuclei)에 기체가 응축되고 충돌, 응집하면서 입자는 성장하게 된다. 열분해법은 실리콘 나노입자를 생산하는 기상공정 중 하나이다. 일반적으로 열분해 공정은 지속적으로 열이 가해지는 반응기 내에 반응기체인 $SiH_4$을 주입하고, 운반기체는 He, $H_2$, Ar, $N_2$ 등을 사용하였을 때, 높은 열로 인해 $SiH_4$가 분해되며, 이 때 가스-입자 전환 현상(gas to particle conversion)이 일어나 실리콘 입자가 형성된다. 그러나 입자 형성과정은 $SiH_4$ 농도, 유량, 작동 압력, 온도 등 매우 다양한 요소에 영향을 받는다. 고, 복잡한 화학반응 메커니즘에 의해 명확히 규명되지는 못하고 있다. 이에 본 연구에서는 복잡한 화학반응을 해석하는 상용코드 CHEMKIN 4.1.1을 이용하여 열분해 반응기 내에서의 실리콘 입자 형성, 성장, 응집, 전송 모델을 만들고 이를 수치해석하였다. 표면 반응, 응집, 전송에 의한 입자 성장 메커니즘을 포함하고 있는 aerosol dynamics model을 method of moment법으로 해를 구하였으며, 이를 실험 결과와 비교하여 모델링을 검증하였다. 또한 반응기의 온도, 압력, 가스 농도, 유량 등의 요소를 고려하여 실리콘 나노입자를 형성하는 최적의 조건을 연구하였다.

• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.119-127
• /
• 2012

Objectives: The aim of this study is to identify concentration characteristics of indoor and outdoor airborne total fiber particles and asbestos in Gyeongnam Provinces. Methods: This study investigated concentration characteristics of indoor fiber particles from 748 schools and 38 public facilities as well as outdoor particles from 11 sites through PCM (phase contrast microscope). SEM/EDX (scanning electron microscope/energy dispersive using X-ray analysis) was used to obtain physicochemical information of asbestos fiber particles. The study identified asbestos rate in the 15 samples from indoor and outdoor airborne total fiber particles. Results: 1. The average indoor airborne concentrations of total fiber particles were $0.0011{\pm}0007$ f/cc in schools and $0.0015{\pm}0007$ f/cc in public facilities by PCM. Over 90% of the fiber particles were identified as single fibers. 2. The average outdoor airborne concentrations of total fiber particles were $0.0007{\pm}0002$ f/cc, and they were lower than those of indoor airborne concentrations. 3. The results showed that the form of asbestiform was diverse as skein of thread like form and long needle, which was relatively narrower than that of glass fiber and rock wool. 4. The results of SEM/EDX analysis of 15 areas where total fiber particle was relatively high showed that the form was rather similar to that of asbestos, but chemical composition was proven to be non-asbestos. Conclusions: The concentration of indoor and outdoor airborne total fiber particles of Gyeongnam Provinces satisfied the IAQ (Indoor air quality) level of 0.01 f/cc and asbestos was not found in most of the samples by SEM/EDX.

• 대한핵의학회지
• /
• 제39권1호
• /
• pp.1-8
• /
• 2005

상용 PET사이클로트론의 기술적인 변화는 PET의 수요와 밀접한 관계가 있다. PET활용이 일반화 되어 미국을 중심으로 PET의 수요가 급증하게 됨에 따라 사이클로트론의 수요도 증가 하였다. 기존의 사이클로트론은 크기와 무게로 병원에 설치에 공간과 전원 공급 등 여러 문제가 있어 각 사이클로트론 제작사들은 새로운 모델을 출시하게 되었다. 새로운 모델의 특징은 다음과 같다. 첫째 기존의 모델이 양성자와 중양자 등의 2가지 이온을 인출 하였으나 시스템의 복잡성 등의 문제와 양성자로 O-15 생산이 가능하여 양성자 빔만을 인출 하거나 중양자는 선택 사양으로 전환 하였다. 둘째 기존 모델의 경우 양성자의 빔 에너지는 약 16 MeV 이상 가속 시킬 수 있으나 신 모델은 13 MeV 이내로 대폭 낮추어 PET 용 Rl생산에 최적화하였다. 셋째 전자석, RF 장치등의 최적화를 이룩하여 전력소모를 대폭 개선하였으며 외양도 대폭 작아져 무게를 20톤 이내로 대폭 낮추었다. 넷째 새로운 모델 사이클로트론들은 자체 차폐기능이 일반화 되었으나 IBA제품이나 삼영유니텍 제품은 사용자의 견지에 따라 선택 사양이 가능하다.

• 공업화학
• /
• 제23권2호
• /
• pp.138-142
• /
• 2012

블루 안료 15 : 6이라 불리는 ${\epsilon}$ 결정상의 동프탈로시아닌(${\epsilon}$-CuPc)는 LCD 패널에서 청색화소를 제공하는 중요한 소재로써, 본 연구에서는 ${\epsilon}$-CuPc 시료를 ${\epsilon}$-CuPc 나노 입자를 seed로 이용하는 방법으로 여러 조건에서 합성하여 적합한 용매 및 온도조건 등을 규명하였고, 이를 미리 합성한 ${\alpha}$ 및 ${\beta}$ 결정상의 CuPc 시료들과 비교함으로써 ${\epsilon}$-CuPc 시료의 결정상, 결정 순도, 합성 수율 및 미세구조를 상호 비교 분석하였다. 시료들의 화학 구조 및 결정 구조는 푸레어 변환 적외선(FT-IR) 분광기 및 X선 회절 분석기(XRD)를 이용하여 각각 비교 분석하였다. 또한, 입자의 형상 및 크기는 주사 전자현미경(FE-SEM)으로 비교 분석하였고, 열적 특성은 열중량분석기(TGA)를 이용하여 비교 분석하였다.

• Current Research on Agriculture and Life Sciences
• /
• 제4권
• /
• pp.50-54
• /
• 1986

시판(市販) 녹차(綠茶)를 $20^{\circ}C$에서 상대습도(相對濕度)를 달리하여 저장하면서 흡습특성(吸濕特性)을 조사하였다. 녹차(綠茶)의 흡습속도(吸濕速度)는 저장상대습도(貯藏相對濕度)가 높을수록 컸으며 저장시간(貯藏時間)이 경과함에 따라 점차 감소하였다. 녹차(綠茶)의 등온흡습곡록(等溫吸濕曲綠)은 전형적인 Sigmoid 형태를 나타내었으며 상대습도(相對濕度)가 일정할 때 저장시간과 흡습속도와의 관계에서 다음과 같은 식(式)을 구할 수 있었다. $ln{\frac{dw}{dt}}=nln(t)+lnc$ B.E.T. 식(式)에 의해 구한 녹차(綠茶)의 단분자층수분함량(單分子層水分含量)은 7.01~7.87%로 나타났다. 저장시간(貯藏時間)과 흡습속도관계식(吸濕速度關係式)에서 구한 계산치 수분함량과 실측치수분함량을 비교한 결과 거의 유사한 경향이었다.

• 한국지반환경공학회 논문집
• /
• 제14권4호
• /
• pp.29-37
• /
• 2013

본 논문에서는 정수슬러지와 폐어망을 재활용하기 위하여 정수슬러지의 다양한 혼합비율(0%, 10%, 30%, 50%)과 폐어망 보강형식(무보강, 무처리된 폐어망, 본딩처리된 폐어망)에 따른 혼합토의 공학적 특성을 조사하였다. 무처리된 폐어망과 본딩처리된 폐어망을 혼합토에 보강하여 흙 입자와 폐어망 표면 사이의 억물림을 증가시키고자 하였다. 다짐시험, 삼축압축시험, 압밀시험, 투수시험과 용출시험과 같은 다양한 실내시험이 수행되었다. 시험 결과 정수슬러지의 혼합비율이 증가할수록 최대건조단위중량, 점착력, 내부마찰각 및 투수계수가 감소하였으나 최적함수비, 압축지수, 팽창지수 및 압축비는 증가하였다. 또한 폐어망 및 본딩처리된 폐어망이 보강됨에 따라 점착력 및 내부마찰각이 증진되었다. 용출시험 결과 환경부가 고시한 기준을 모두 만족하는 것으로 나타났다.

• 방사선산업학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2015

The trend of x-ray image sensor has been evolved from an amorphous silicon sensor to a crystal silicon sensor. A crystal silicon X-ray sensor, meaning a X-ray CIS (CMOS image sensor), is consisted of three transistors (Trs), i.e., a Reset Transistor, a Source Follower and a Select Transistor, and a photodiode. They are highly sensitive to radiation exposure. As the frequency of exposure to radiation increases, the quality of the imaging device dramatically decreases. The most well known effects of a X-ray CIS due to the radiation damage are increments in the reset voltage and dark currents. In this study, a pixel array of a X-ray CIS was made of $20{\times}20pixels$ and this pixel array was exposed to a high radiation dose. The radiation source was Co-60 and the total radiation dose was increased from 1 to 9 kGy with a step of 1 kGy. We irradiated the small pixel array to get the increments data of the reset voltage and the dark currents. Also, we simulated the radiation effects of the pixel by MCNP (Monte Carlo N-Particle) simulation. From the comparison of actual data and simulation data, the most affected location could be determined and the cause of the increments of the reset voltage and dark current could be found.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권2호
• /
• pp.97-109
• /
• 2015

A series of amphiphilic graft copolymers were synthesized by varying the number of graft chains and graft chain lengths. The polarity of the hydrophobic graft chain on the copolymers was varied their solution properties. The glass transition temperature of the copolymers was in the low-temperature region, because of the amorphous nature of poly (trimethylene carbonate) (PTMC). The surface morphology of the lyophilized colloid gel had a bundle structure, which was derived from the combination of poly(N-hydroxyethylacrylamide)( poly(HEAA)) and PTMC. The solution properties were evaluated using dynamic light scattering and fluorescence measurements. The particle size of the graft copolymers was about 30-300 nm. The graft copolymers with a higher number of repeating units attributed to the TMC (trimethylene carbonate) component and with a lower macromonomer ratio showed high thermal stability. The critical association concentration was estimated to be between $2.2{\times}10^{-3}$ and $8.9{\times}10^{-2}mg/mL$, using the pyrene-based fluorescence probe technique. These results showed that the hydrophobic chain of the graft copolymer having a long PTMC segment had a low polarity, dependent on the number of repeating units of TMC and the macromonomer composition ratio. These results demonstrated that a higher number of repeating units of TMC, with a lower macromonomer composition, was preferable for molecular encapsulation.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 1997년도 Progress and Future Development of Sericultural Science and Technology 40th Anniversary Commemoration Symposium
• /
• pp.23-49
• /
• 1997

This is a progress report of rice biotechnology including development of gene transformation system, gene cloning and molecular mapping in rice. The scope of the research was focused on the connection between conventional breeding and biotech-researches. Plant transformation via Agrobacterium or particle bombardment was developed to introduce one or several genes to recommended rice cultivars. Two chimeric genes containing a maize ribosome inactivating protein gene (RIP) and a gerbicide resistant gene (bar) were introduced to Nipponbare, a Japonica cultivar, and transmitted to Korean cultivars. The homozygous progenies of herbicide resistant transgenic plant showed good fertility and agronomic characters. To explore the genetic resourses in rice, over 8,000 cDNA clones from immature rice seed have been isolated and sequenced. About 13% of clones were identified as enzymes related to metabolic pathway. Among them, twenty clones have high homology with genes encoding enzymes in the photorespiratory carbon cycle reaction. Up to now about 100 clones were fully sequenced and registered at EMBL and GenBank. For the mapping of quantitative tarits loci (QTL) and eternal recombinant inbred population with 164 F13 lines (MGRI) was developed from a cross between Milyang 23 and Gihobyeo, Korean rice cultivars. After construction of fully saturated RFLP and AFLP map, quantitative traits using MGRI population were analyzed and integrated into the molecular map. Eighty seven loci were determined with 27 QTL characters including yield and yield components on rice chromosomes. Map based cloning was also tried to isolate semi-dwarf (sd-1) gene in rice. A DNA probe, RG 109, the most tightly linked to sd-1 gene was used to screen from bacterial artifical chromosome (BAC) libraries and five over lapping clones presumably containing sd-1 gene were isolated. Rice genetic database including results of biotech reasearch and classical genetics is provided at Korea Rice Genome Server which is accessible with world wide web (www) browser. The server provides rice cDNA sequences and map informations linked with phenotypic images.

• Journal of Forest and Environmental Science
• /
• 제37권3호
• /
• pp.193-205
• /
• 2021

The importance of forests and trees in climate change mitigation and soil nutrient cycling cannot be overemphasized. This study assessed the above-ground carbon stock of two exotic and two indigenous tree species - Gmelina arborea, Tectona grandis, Khaya grandifoliola and Nauclea diderrichii and their litter impact on soil nutrient content of an arboretum within the University of Port Harcourt, Nigeria. Data were collected from equal sample plots from the four species' compartments. Tree growth variables including total height, diameter at breast height, crown height, crown diameter and merchantable height were measured for the estimation of above-ground carbon stock. Soil samples were collected from a depth of 0-30 cm from each compartment and analyzed for particle size distribution, organic carbon, total nitrogen, available phosphorus, exchangeable bases, exchangeable acidity, cation exchange capacity, base saturation, pH, Manganese, Iron, Copper and Zinc. Analysis of Variance (ANOVA) was used to test for significant difference (p<0.05) in the carbon contents of the four species and the soil nutrient contents of the different species' compartments. Pearson correlation was used to assess the relationships between the carbon contents, growth parameters and soil parameters. The highest and lowest carbon stock per hectare was observed for G. arborea (151.52 t.ha^-1) and K. grandifoliola (45.45 t.ha^-1) respectively. Cation exchange capacity and base saturation were highest and lowest for soil under G. arborea and K. grandifoliola respectively. The pH was highest and lowest for soil under G. arborea and T. grandis respectively. Carbon stock correlated positively with dbh, crown diameter, merchantable height and Zn and negatively with base saturation. The study revealed that G. arborea and N. diderrichii can effectively be used for reforestation and afforestation programmes aimed at climate change mitigation across Nigeria. Therefore, policies to encourage and enhance their planting should be encouraged.