• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.331-340
• /
• 2006

In this Paper, we propose to extend the TSS-LS(Two-Step Search scheme with Linear search based Second step) scheme which was already proposed by the authors for coherent UWB(Ultra Wide Band) systems, to rapid and reliable acquisition of noncoherent UWB systems in multipath channels. The proposed noncoherent TSS-LS employing simple energy window banks utilizes two different thresholds and search windows to achieve fast acquisition. Furthermore, the linear search is adopted for the second step in the proposed scheme to correctly find the starting point in the range of effective delay spread of the multipath channels, and to obtain reliable BER(Bit Error Rate) performance of the noncoherent UWB systems. Simulation results with multipath channel models by IEEE 802.15.3a show that the proposed two-step search scheme can achieve significant reduction of the required mean acquisition time as compared to general search schemes. ]n addition, the proposed scheme achieves quite good BER performance for large signal-to-noise ratios, which is favorably comparable to the case of ideal perfect timing.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.3
• /
• pp.217-227
• /
• 1992

The purpose of this paper is to investigate changes in soft tissue in 22 patients treated by vertical ramus osteotomy and sagittal split ramus osteotomy for the correction of mandibular prognathism. 22 individuals, 12 males and 10 females, were selected from the patients with mandibular prognathism at the Department of Oral and Maxillofacial Surgery, Colledge of Dentistry, Kyung Hee University. Patient were analyzed with cephalogram taken 1 week before and at least 6 weeks after surgery under the same condition. Measurements were made constructed hard tissue and sop tissue points located on each before-and-after film tracing. Comparision were made of these figures to estimate the amount that the soft tissue followed the hard tissue structures in each surgical procedure : ratio of sop and hard tissue changes were formulated. The results were as follows. 1. The horizontal changes of Pogs and Bs as a ratio of the horizontal changes of Pog and B point were 1.02 and 1.16 respectively. 2. One millimeter of posterior changes at Pog resulted in 0.86mm of posterior change at Li and 0.09mm of posterior change at Ls. The greatest amount of sop tissue change occurred at Pogs, with substantially less posterior displacement at Bs, even less at Li and at least at Ls. 3. The ratio of LI to Li was 1:0.81 and the ratio of LI to Ls was not significant.(1 : 0.17) 4. The ULA(Cm-Sn-Ls) and the relative lower lip projection (LLP) was incnease4 but the relative upper lip projection (ULP) was slightly decreased 5. The angular change of the upper lip inclined angle (Ls-Sn/ANS-PNS) and lower lip inclined angle(Li-Pogs/Me-Go) expressed as a ratio of the posterior change of Pog were 0.57 and 0.20 respectively. 6. The ratio of the lower anterior facial height change of the soft tissue(Sn-Mes) to the hard tissue(ANS-Gn) were 0.78 and and the ratio of vertical height changes of the hard tissue and sop tissue to the posterior change of the Pog were 0.18 and 0.19 respectively. 7. The sop tissue angular change of facial convexity(G-Sn-Pogs) expressed as a ratio of the angular change of the hard tissue angle of facial convexity(N-A-Pog) was 1.24.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.178-203
• /
• 2018

In this paper, authors have been evaluated the Frame Error Rate (FER) performance of IEEE 802.11 a/g/p standard 5 GHz frequency band WLAN over Rayleigh and Rician distributed fading channels in presence of Additive White Gaussian Noise (AWGN). Orthogonal Frequency Division Multiplexing (OFDM) based transceiver is implemented by using real-time signal processing frameworks (IEEE 802.11 Blocks) in GNU Radio Companion (GRC) and Ettus USRP N200 is used to process the symbol over the wireless radio channel. The FER is calculated for each sub-carrier conventional modulation schemes used by OFDM such as BPSK, QPSK, 16, 64-QAM with different punctuated coding rates. More precise SNR is computed by modifying the SNR calculation process of YANS and NIST error rate model to estimate more accurate FER. Here, real-time signal constellations, OFDM signal spectrums etc. are also observed to find the effect of multipath propagation of signals through flat and frequency selective fading channels. To reduce the error rate due to the multipath fading effect and Doppler shifting, channel estimation (CE) and equalization techniques such as Least Square (LS) and training based adaptive Least Mean Square (LMS) algorithm are applied in the receiver. The simulation work is practically verified at GRC by turning into a pair of Software Define Radio (SDR) as a simultaneous transceiver.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.4
• /
• pp.209-220
• /
• 2012

Post-earthquake fire (PEF) can lead to a rapid collapse of buildings that have been partially damaged as a result of a prior earthquake. Almost all standards and codes for the design of structures against earthquake ignore the risk of PEF, and thus buildings designed using those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the immediate occupancy (IO), life safety (LS) and collapse prevention (CP) performance levels of two portal frames, after they are pushed to arrive at a certain level of displacement corresponding to the mentioned performance level. This investigation is followed by a fire analysis of the damaged frames, examining the time taken for the damaged frames to collapse. As a point of reference, a fire analysis is also performed for undamaged frames and before the occurrence of earthquake. The results indicate that while there is minor difference between the fire resistances of the fire-alone situation and the frames pushed to the IO level of performance, a notable difference is observed between the fire-alone analysis and the frames pushed to arrive at LS and CP levels of performance and exposed to PEF. The results also show that exposing only the beams to fire results in a higher decline of the fire resistance, compared to exposing only the columns to fire. Furthermore, the results show that the frames pushed to arrive at LS and CP levels of performance collapse in a global collapse mode laterally, whereas at the IO level of performance and fire-alone situation, the collapse mechanism is mostly local through the collapse of beams. Whilst the investigation is conducted for a certain class of portal frames, the results confirm the need for the incorporation of PEF into the process of analysis and design, and provide some quantitative measures on the level of associated effects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.171-171
• /
• 2013

2층 FCCL (연성회로기판, Flexible Copper Clad Laminate)에 있어서 폴리이미드 필름과 구리의 접착력을 향상 시키기 위해 기존에 사용되고 있는 Ni-Cr대신 박리강도가 높고 에칭성도 매우 뛰어난 Ni-Mo-Nb 박막을 Roll-to roll 스퍼터 장비를 이용하여 개발하였다. 새롭게 개발된 Ni-Mo-Nb 박막은 기존 연구되어진 Ni-Cr 물질 대비 고온 박리강도 약 1.5~2.0배, 에칭성 8배 이상의 매우 우수한 특성을 보였다. Ni-Mo-Nb 접착층의 두께가 7~40 nm로 증가함에 따라 상온 박리강도가 향상 되는 것을 확인하였다. Ni-Mo-Nb 박막을 증착 하기 전 폴리이미드 기판표면을 RF 플라즈마 전처리 하였을 때 0.67 kg f/cm의 우수한 상온 박리강도를 나타내었으며 FCCL 샘플을 $150^{\circ}C$에서 168시간동안 열처리 한 후 접착력을 측정하였을 때도 0.54 kg f/cm의 높은 고온 박리강도를 보였다. FCCL의 박리강도, 표면 거칠기, 원소들의 화학적 결합, 박막의 미세구조를 peel test, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy를 이용하여 폴리이미드 기판 플라즈마 전처리 효과를 확인하였다. 그 결과 플라즈마 전처리를 한 폴리이미드 기판의 경우 처리하지 않은 기판보다 상온과 고온에서 더 우수한 접착력을 가지는 것을 확인 할 수 있었는데 이것은 폴리이미드 기판의 표면 거칠기 증가에 의한 mechanical interlocking effect가 아닌 전처리를 통한 폴리이미드 표면 개질로 C-0, C-N와 같은 chemical functional group이 증가했기 때문인 것으로 확인되었다.

• Journal of Nutrition and Health
• /
• v.36 no.2
• /
• pp.175-182
• /
• 2003

This study was conducted to examine whether bone mineral density changes in 55 young Korean college women aged 19 to 26 years over 2 years and nutritional and biochemical factors are related. Bone mineral density (BMD) was measured in the spine (LS), femoral neck (FN), ward's triangle (WT), and femoral trochanter (FT) by dual energy X-ray absorptiometry three times at one-year intervals. Serum osteocalcin (OC), parathyroid hormone (PTH), and urinary cross-linked N-teleopeptides of type collagen (NTx) were measured. Dietary intake was assessed 8 times with 24-hour recall method. Physical activity (PA) was obtained by questionnaire and body fat content was measured by bioelectrical impedance analysis at baseline and after 2 years. Analyses were performed on 34 subjects with all three BMD measurements. The BMDs at the lumbar spine gradually increased over 2 years, while the BMDs of three sites at the femur were sustained or increased. The mean OC, PTH had a similar pattern with the change of BMD at the femur. The mean NTx decreased over 2 years but was still higher than those in other studies. BMI, body fat, vitamin A and zinc intake had a significant correlation with LS-BMD. Femur, PTH, body fat, vitamin A, vitamin B$_2$and calcium intake had a significant correlation with WT-BMD and was mostly influenced by diet. By multiple regression analysis, it was shown that the significant factors affecting the LS-BMD were BMI and vitamin A intake and those affecting FN and WT were age, BMI, PTH and calcium intake. These results indicate that some Korean women still experience increases in BMD and that this was associated with PTH and vitamin A and calcium intake. Therefore, proper diet and diet management is needed to increase changes in BMD among college women.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.6
• /
• pp.335-345
• /
• 2022

PURPOSE. This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia grinding and polishing. MATERIALS AND METHODS. Zirconia crowns (n = 40) were first prepared and divided into two groups of materials: Labside (LS) and CS, after which each specimen went through a five-step grinding and polishing procedure. Following each surface treatment, surface characteristics were analyzed using confocal laser microscopy (CLSM), average surface roughness (Ra) values were processed from the profile data through Gaussian filtering, and X-ray diffraction pattern analysis was performed to evaluate the monoclinic (M) phase content. Then, a representative specimen was selected for field-emission scanning electron microscopy (FE-SEM), followed by a final analysis of the roughness and X-ray diffraction of the specimens using the independent t-test and repeated measures analysis of variance (RM-ANOVA). RESULTS. In every group, polishing significantly reduced the Ra values (P < .001). There was no significant difference in Ra between the polished state CS and LS. Furthermore, CLSM and FE-SEM investigations revealed that even though grain exposure was visible in CS specimens throughout the as-delivered and ground states, the exposure was reduced after polishing. Moreover, while no phase transformation was visible in the LS, phase transformation was visible in CS after every surface treatment, with the M phase content of the CS group showing a significant reduction after polishing (P < .001). CONCLUSION. Within the limits of this study, clinically acceptable level of surface finishing of (Y, Nb)-TZP can be achieved after conventional zirconia polishing sequence.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.6
• /
• pp.473-480
• /
• 2022

Purpose: Low bone mineral density (BMD) is a complication in children with inflammatory bowel disease (IBD). There are limited data evaluating dual-energy x-ray absorptiometry (DXA) as a screening tool for low BMD in children with IBD. We performed a single site retrospective analysis of DXA use. Methods: Children aged 5-18 years with IBD diagnosed between 2013 to 2017 at the Royal Children's Hospital, Australia, were included. Patient demographics, measures of disease activity, DXA scores, and factors related to BMD were collected. Results: Over a median follow up of 5.1 (4-6.4) years, 72/239 (30.1%) children underwent DXA, and 28/239 (11.7%) children had a second DXA. Our DXA practice differed to consensus guidelines regarding initial screening based on height and/or body mass index (BMI) z-score (8/17 [47.1%]), and repeat surveillance (13/42 [31.0%]). Children had a median lumbar spine (LS) z-score -0.80 (-1.65-0.075). Children with LS z-score≤-2.0 (n=14) had lower weight (6.57 [1.78-23.7] vs. 51.1 [26.5-68.7], p=0.0002) and height centiles (3.62 [1.17-17.1] vs. 42 [16.9-67.1], p=0.0001), and higher faecal calprotectin (FCP) (3041 [1182-4192] vs. 585 [139-2419], p=0.009) compared to children with LS z-score>-2.0. No fractures were reported. Of 28 children who underwent a second DXA 1.6 (1.1-2.2) years following initial DXA, no significant change in z-scores occurred. Conclusion: Children with IBD had low BMD. In addition to height centile and weight centile, FCP was associated with lower BMD, and should be considered in DXA screening guidelines. Greater clinician awareness of DXA consensus guidelines is required. Future prospective studies are required.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1568-1574
• /
• 2012

Three Holstein steers in the growing phase, each with a ruminal cannula, were used to test the hypothesis that the synchronization of the hourly rate of carbohydrate and nitrogen (N) released in the rumen would increase the amount of retained nitrogen for growth and thus improve the efficiency of microbial protein synthesis (EMPS). In Experiment 1, in situ degradability coefficients of carbohydrate and N in feeds including Korean rice wine residue (RWR) were determined. In Experiment 2, three total mixed ration (TMR) diets having different rates of carbohydrate and N release in the rumen were formulated using the in situ degradability of the feeds. All diets were made to contain similar contents of crude protein (CP) and neutral detergent fiber (NDF) but varied in their hourly pattern of nutrient release. The synchrony index of the three TMRs was 0.51 (LS), 0.77 (MS) and 0.95 (HS), respectively. The diets were fed at a restricted level (2% of the animal's body weight) in a $3{\times}3$ Latin-square design. Synchronizing the hourly supply of energy and N in the rumen did not significantly alter the digestibility of dry matter, organic matter, crude protein, NDF or acid detergent fiber (ADF) (p>0.05). The ruminal $NH_3$-N content of the LS group at three hours after feeding was significantly higher (p<0.05) than that of the other groups; however, the mean values of ruminal $NH_3$-N, pH and VFA concentration among the three groups were not significantly different (p>0.05). In addition, the purine derivative (PD) excretion in urine and microbial-N production (MN) among the three groups were not significantly different (p>0.05). In conclusion, synchronizing dietary energy and N supply to the rumen did not have a major effect on nutrient digestion or microbial protein synthesis (MPS) in Holstein steers.