• 한국물환경학회지
• /
• 제26권3호
• /
• pp.446-453
• /
• 2010

This study was investigated nine nitrosamines in small tributary rivers, sewage treatment plants (STPs) and drinking water treatment plants. They are N-nitrosodimethylamine (NDMA), N-nitrosomethylethylamine (NMEA), N-nitrosodiethylamine (NDEA), N-nitrosopyrrolidine (NPYR), N-nitrosodi-n-propylamine (NDPA), N-nitrosomorpholine (NMOR), N-nitrosopiperidine (NPIP), N-nitrosodi-n-butylamine (NDBA) and N-nitrosodiphenylamine (NDPHA). The nine nitrosamines were analyzed by gas chromatography mass spectrometry (GC/MS) using solid phase extraction (SPE) with a coconut charcoal cartridge. Among the nine nitrosamines, NDMA, NMEA, NDEA, NDPA NDBA and NDPHA were detected in small tributary rivers and sewage tretment plants. In small tributary rivers, NDMA, NMEA, NDEA, NDPA, NDBA and NDPHA were obtained as ND~16.4 ng/L, ND~17.7 ng/L, ND~102.4 ng/L, ND~455.4 ng/L, ND~330.1 ng/L and ND~161.0 ng/L, respectively. Also NDMA, NMEA, NDEA, NDPA and NDBA were investigated ND~821.4 ng/L, 22.5~55.4 ng/L, 53.2~588.5 ng/L, ND~56.6 ng/L and ND~527.9 ng/L in STPs, respectively. In drinking water treatment plants, NMEA and NDEA concentration were increased to as high as 38.8 ng/L after ozonation process. However nitrosamines were decreased subsequent biological activated carbon (BAC) treatment process. It was supposed that nitrosamines were formed by $O_3$ oxidation and were removed by biodegradation of BAC.

• 접착 및 계면
• /
• 제22권1호
• /
• pp.1-7
• /
• 2021

신재생 에너지 발전을 통한 안정적인 전력 공급을 위해 대용량 에너지 저장 장치의 중요성이 최근 부각되고 있다. 이러한 관점에서 차세대 이차 전지인 Na-air battery (NAB)는 풍부하고 저렴한 원재료를 통해 대용량을 구현할 수 있어 많은 관심을 받고 있다. 본 연구에서는 Hybrid type Na-air battery를 위한 활성탄 기반 촉매들을 제조하여 이들의 특성을 비교 분석하였다. 특히, 자원 재활용의 관점에서 버려진 오렌지 껍질을 사용하여 활성탄(Orange-C)과 이를 질소를 이용하여 도핑한 활성탄(N-doped-Carbon, Nd-C)을 제조하였으며, 널리 사용되고 있는 Vulcan카본과 성능을 비교하였다. 또한, 제조한 활성탄(Nd-C)이 지지 촉매로 활용 가능한지 확인하기 위해 수정된 폴리올법을 사용하여 Pt/C 촉매(homemade-Pt/C, HM-Pt/C)를 합성하였으며, 상용화된 Pt/C 촉매(Commercial Pt/C)와 전기화학적 성능을 비교하였다. 제조된 Orange-C와 Nd-C는 전형적인 H3 타입 BET isotherm을 보였으며, 이는 마이크로 기공과 메조기공이 존재한다는 증거이다. 또한, HM-Pt/C의 경우, 활성탄(Nd-C) 지지 촉매 위에 Pt 입자가 고르게 분포하고 있음을 TEM 분석을 통해 확인할 수 있었다. 특히, HM-Pt/C 기반의 NAB의 경우, 1st galvanostatic charge-discharge 시험에서 가장 작은 Voltage gap (0.224V)과 우수한 Voltage efficiency (92.34%)를 보였다. 또한, 20사이클 동안 진행한 사이클 성능 시험에서도 가장 안정적인 성능을 보였다.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.486-491
• /
• 2014

본 연구는 입상활성탄을 사용하여 수용액으로부터 cibacron brilliant red 3B-A의 흡착 거동과 동력학적 특성에 대해 회분식 실험을 통해 알아보았다. 흡착변수로는 흡착제의 양, pH, 초기농도와 접촉시간과 온도를 사용하였다. 평가된 Langmuir 상수($R_L$)과 Freundlich 상수(1/n)로부터 활성탄에 의한 cibacron brilliant red 3B-A의 흡착조작이 적절한 처리방법이 될 수 있음을 알았고, Temkin 상수(B)와 Dubinin-Radushkevich 상수(E)로부터 물리흡착공정임을 알았다. 흡착공정에 대한 동력학적 해석을 통해 반응속도식의 적용결과는 유사이차반응속도식에 잘 맞는 것으로 나타났다. Gibbs 자유에너지와 엔탈피값으로부터 입상활성탄에 대한 cibacron brilliant red 3B-A의 흡착은 자발적인 물리흡착 및 흡열과정으로 진행되었다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3319-3326
• /
• 2014

Eosin yellow는 유용한 염료나 색소로 사용되지만 유해한 독성을 가진 물질이다. 본 연구에서는 활성탄을 사용하여 eosin yellow를 흡착하는데 필요한 흡착평형과 흡착동역학에 대하여 pH, 초기농도, 접촉시간 등을 변수로 하여 조사하였다. 등온흡착평형관계를 검토한 결과 평가된 Langmuir 상수값, $R_L$=0.067-0.083과 Freundlich 상수값 $\frac{1}{n}=0.237-0.267$로부터 활성탄에 의한 eosin yellow의 흡착조작이 적절한 처리방법이 될 수 있음을 알았고, Temkin 상수값, B=1.868-2.855 J/mol과 Dubinin-Radushkevich 식 상수값, E=5.345-5.735 kJ/mol로부터 흡착공정이 물리흡착공정임을 알았다. 흡착공정에 대한 동력학적 해석을 통해 반응속도식의 적용결과는 유사이차반응속도식이 유사일차반응속도식에 비해 일치도가 높은 것으로 나타났으며, 입자내확산식에 의해 흡착공정은 경계층확산과 입자내확산의 2단계로 진행되는 것을 알았다.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.429-433
• /
• 2010

In this study, activated carbon (AC) as a carbon source was modified with different concentrations of cobalt chloride ($CoCl_2$) to prepare a Co-AC composite, and it was used for the preparation of Co-AC/$TiO_2$ composites with titanium oxysulfate (TOS) as the titanium precursor. The physicochemical properties of the prepared Co-AC/$TiO_2$ composites were characterized by $N_2$ adsorption at 77 K, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The photocatalytic treatments of organic dyes were examined under an irradiation of visible light with different irradiation times. $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine AC, which was $389\;m^2/g$. From the XRD results, the Co-AC/$TiO_2$ composites contained a mixturephase structuresof anatase and rutile, but a cobalt oxide phase was not detected in the XRD pattern. The EDX results of the Co-AC/$TiO_2$ composites confirmed the presence of various elements, namely, C, O, Ti, and Co. Subsequently, the decomposition of methylene orange (MO, $C_{14}H_{14}N_3NaO_3S$) and rhodamine B (Rh.B, $C_{28}H_{31}ClN_2O_3$) in an aqueous solution, respectively, showed the combined effects of an adsorption effect by AC and the photo degradation effect by $TiO_2$. Especially, the Co particles in the Co-AC/$TiO_2$ composites could enhance the photo degradation behaviors of $TiO_2$ under visible light.

• Journal of Electrochemical Science and Technology
• /
• 제3권2호
• /
• pp.72-79
• /
• 2012

$Li_2MnSiO_4$ was synthesized using the solid-state method under an Ar atmosphere at three different calcination temperatures (900, 950, and $1000^{\circ}C$). The optimization of the carbon coating was also carried out using various molar concentrations of adipic acid as the carbon source. The XRD pattern confirmed that the resulting $Li_2MnSiO_4$ particles exhibited an orthorhombic structure with a $Pmn2_1$ space group. Cyclic voltammetry was utilized to investigate the capacitive behavior of $Li_2MnSiO_4$ along with activated carbon (AC) in a hybrid supercapacitor with a two-electrode cell configuration. The $Li_2MnSiO_4$/AC cell exhibited a high discharge capacitance and energy density of $43.2Fg^{-1}$ and $54Whkg^{-1}$, respectively, at $1.0mAcm^{-2}$. The $Li_2MnSiO_4$/AC hybrid supercapacitor exhibited an excellent cycling stability over 1000 measured cycles with coulombic efficiency over > 99 %. Electrochemical impedance spectroscopy was conducted to corroborate the results that were obtained and described.

• Carbon letters
• /
• 제13권4호
• /
• pp.236-242
• /
• 2012

Poly(vinylidene chloride) (PVDC)-derived nanoporous carbons were prepared by various activation methods: heat-treatment under an inert atmosphere, steam activation, and potassium hydroxide (KOH) activation at 873, 1073, and 1273 K. The pore structures of PVDC-derived nanoporous carbons were characterized by the $N_2$ adsorption technique at 77 K. Heat treatment in an inert atmosphere increased the specific surface area and micropore volume with elevating temperature, while the average micropore width near 0.65 nm was not significantly changed, reflecting the characteristic pore structure of ultramicroporous carbon. Steam activation for PVDC at 873 and 1073 K also yielded ultramicroporosity. On the other hand, the steam activated sample at 1273 K had a wider average micropore width of 1.48 nm, correlating with a supermicropore. The KOH activation increased the micropore volume with elevating temperature, which is accompanied by enlargement of the average micropore width from 0.67 to 1.12 nm. The average pore widths of KOH-activated samples were strongly governed by the activation temperature. We expect that these approaches can be utilized to simply control the porosity of PVDC-derived nanoporous carbons.

• Carbon letters
• /
• 제6권2호
• /
• pp.89-95
• /
• 2005

Crushed peach stone shells were impregnated with $H_3PO_4$ of increasing concentrations (30-70%) followed by heat treatment at 773 K for 3 h. Produced carbons (ACs) were characterized by $N_2$ adsorption at 77 K using the BET-equation and the ${\alpha}$-method. High surface area microporous ACs were obtained, with enhanced internal pore volume, as function of % $H_3PO_4$. Adsorption isotherms from aqueous solution were determined for methylene blue (MB) and p-nitrophenol (PNP), as representatives for dye and phenolics pollutant molecules. Application of the Langmuir model proved the high limiting capacity towards both solute molecules, MB was uptaken in increasing amounts as function of $H_3PO_4$ concentration and generated porosity. High removal of PNP was almost the same irrespective of porosity characteristics. Competitive adsorption of $H_2O$ molecules on the hydrophilic carbon surface seems to partially reduce the available area to the PNP molecules. Application of the pseudo-second order law described well the fast adsorption (${\leq}$ 120 min) at two initial dye concentrations.

• 공업화학
• /
• 제23권5호
• /
• pp.490-495
• /
• 2012

오존/활성탄 공정을 이용하여 페놀을 처리 할 경우, 활성탄에 의해 나타나는 촉매효과에 관한 연구를 수행하였다. 오존 단독공정에 활성탄을 추가할 경우, 활성탄 투입량이 증가할수록 용존 오존 및 페놀의 분해효율이 증가하는 것으로 나타났다. 이는 활성탄에 의해서 용존 오존이 분해되어 생성된 수산화 라디칼이 페놀 제거에 영향을 미쳤으며, 본 연구에서는 활성탄의 촉매효과([$\Delta$phenol] / $[{\Delta}O_{3}]_{AC}$)로 나타내었다. 활성탄 10~40 g/L 투입 시, 모든 활성탄의 최대 촉매효과 값은 $2.0\;{\pm}\;0.1$로 나타났지만, 10 g/L와 20 g/L를 투입한 경우, 40 min 경과 후 최대 촉매효과에 근접한 반면, 활성탄 30 g/L와 40 g/L를 투입한 경우, 반응 20 min 경과 후 최대 촉매효과에 도달하였다. 또한 Total Organic Carbon (TOC, 총유기탄소)의 제거율은 오존 단독공정에서 0.23으로 나타났으며, 오존/활성탄 공정에서는 0.63으로 나타났다.

• 한국연초학회지
• /
• 제25권1호
• /
• pp.59-69
• /
• 2003

The adsorption characteristics of H$_2$S, NH$_3$and $CH_3$SH on the graphite carbon have been investigated using Grand Canonical Monte Carlo(GCMC) method with universal force field (UFF) and dreiding force field. Most of the activated carbons used in vapor phase adsorption have the micropore of 6$\AA$ to 20$\AA$ and the specific surface area of ca. 1000 m$^2$/g, as the result of $N_2$ adsorption by BET method. For the more efficient comparison, the activated carbons have been manipulated with different pore sizes. The adsorption characteristics of H$_2$S, NH$_3$and $CH_3$SH have been considered at various temperatures and pressures. The adsorption amount using Dreiding force field is predicted to be lower than that using UFF. As the temperature is going to high, the adsorption amount of adsorbates is decreased due to their vaporization. Considering the pore size effect, the adsorption characteristic depends on the adsorbate size, polarity and interaction between adsorbates, etc. At all cases employed in this study, NH$_3$ is barely adsorbed and $CH_3$SH is preferentially adsorbed on the graphite carbon. Our theoretical result is qualitatively good agreement with the experimental observation. However, there are some quantitative discrepancies depending on the functional groups and pore size distribution on the real activated carbons used in experiment.