• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.264-272
• /
• 2011

It needs to develop high phosphate-available rice that is able to minimize environmental pollution caused by phosphate fertilizer. Then we have transformed 4 rice transporter genes, OsPT(Oryza sativa Phosphate Transporter)1, OsPT4, OsPT7 or OsPT8, to rice (Oryza sativa cv. Dongjin) via Agrobacterium-mediated transformation. We tested adaptation in the P-deficient condition of Dongjin (parental) and each transgenic line in the pot and the field conditions. Definite physiological changes have been observed in OsPTs transgenic lines including culm length, root formation and heading date. Phosphate uptake at harvesting stage was about three times higher in OsPT1-OX (overexpression) and OsPT4-OX than in Dongjin (wt) without P application. There are no variations in total phosphate-content of brown rice of OsPT1-OX in spite of high phosphate uptake. Practically the expression of OsPT1 has contributed to stabilize grain production without P fertilization in rice cultivation than Dongjin.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.77-85
• /
• 2008

Grazing rates (GR) and pseudofaeces production (PFP) of native snail, Chinese mystery snail (Cipangopaludina chinensis malleata Reeve) on natural colonial morphs of Microcystis aeruginosa was measured. C. chinensis was collected from the upstream of the Geum River (Boryeong, Korea), where they co-habituated with Unio douglasiae and Lanceolaria acrorhyncha. The experiments were performed to evaluate the GR and PFP at different conditions such as; incubation time (1, 3, 5, 7, 9 and 11 hr), body size (3 to 6.1 cm, n=28), snail density (0.5, 1, 1.5 and 2.0 ind. $L^{-1}$) and prey concentration (168.3, 336.7, 505.0 and $673.0{\mu}g\;Chl-{\alpha}L^{-1}$). All experiments were triplicated, and conducted in transparent acrylic vessel (3L in volume). Regarding feeding time, a highest GR (0.538L $gAFDW^{-1}h^{-1}$) and PFP $(7.18mgAFDW^{-1})$ appeared at 1hr and 7hr after snail stocking, respectively. Interestingly, the snail, smaller than 4.5cm in body size, showed a wide range of GR ($-4.173{\sim}1.087L\;gAFDW^{-1}h^{-1}$) for the initial period (1 and 4hrs of stocking), compared to those greater than 4.5cm, which showed a stable FR, higher than 0.5L $gAFDW^{-1}h^{-1}$. Upon density effect, the density of 1.5 ind. $L^{-1}$ induced the most effective inhibition on Microcystis biomass with highest PFP. On the prey concentration, highest GR (0.897L $gAFDW^{-1}h^{-1}$) and PFP (3.67 mg $gAFDW^{-1}h^{-1}$) were induced at the level of $168.3{\mu}g\;Chl-{\alpha}L^{-1}$ and $673{\mu}g\;Chl-{\alpha}L^{-1}$, respectively. GR and PFP of this freshwater snail on the cyanobacterial bloom (M. aeruginosa) varied with the feeding conditions, and they were comparatively high for a short period of time less than 7hrs regardless of the stocking condition. Our results suggest that this freshwater snail has a potential to control cyanobacterial bloom when provided with suitable condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.251-258
• /
• 2005

This study was conducted to examine the effect of application of pig manure slurry(PMS) for rye cultivation in Paddy-land on rice productivity The field experiments were carried out from 1999 to 2002 on well-grown rice in Paddy-land at Kimje, Chunbuk province in Korea. PMS was manufactured by the fermentation for 6 months in natural condition. Amount of PMS was adjusted equal to total nitrogen value relative to its value of commercial chemical fertilizers. The amount of PMS were spread evenly over the soil surface two times; first in the autumn (before sowing, end of November) and second in the spring(regrowth of rye, middle of March). The field plots were consisted of four kinds (PMS $100\%$ treatment, PMS $200\%$ treatment PMS $100\%$ treatment with half of CF (CF $50\%$), Full of CF treatment (CF $100\%$). The experiment was designed as a randomized complete block. Each treatment was replicated three times. Rices are customarily gown under tropical korean condition as annuals. The results obtained from this study were summarized as fellows. Panicle length of rice was shorter in PMS $100\%$ than other treatments. Ripening grain ratio was the lower in CF treatment. In treatment of PMS $100\%$ and PMS $200\%$, 1000 grain weight was a downward trend as compared to that of full of CF treatments, whereas number of grains per $m^2$ was increased as compared to other treatments. Number of panicles reveals that there is an increase in order; CF $50\% + PMS\;100\%>\;PMS\;100\%\;>\;CF\;100\%\;>\;PMS\;200\%$. Yield of milled rice showed hi인 in CF $100\%$ and $CF 50\%+ PMS 100\%$, but were was no significant difference among treatments. There were did not a regular tendency in the ratio of leaf sheath bright, however the ratio of lodging area was higher in $CF50\%+PMS\;100\%$ treatment than other treatments. Based on the results of this experiment, $CF 50\%+PMS\;100\%$ may be the most effective in rice productivity under application of PMS for rye cultivation in Paddy-land.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.75-81
• /
• 2010

In order to investigate the effects of different milling degrees on the quality of glutinous rice wines, the physicochemical properties and volatile compounds of various wines were evaluated. Sample wines prepared from glutinous rice with 90, 80, and 70% milling yields were analyzed for ethanol, pH, total acids, amino acids, soluble solids, coloring degree, UV absorbance, reducing sugars, organic acids, free sugars and volatile compounds. After fermentation for 17 days, ethanol contents in the wines ranged from 15.2 to 15.85%, while total acid levels ranged from 0.31 to 0.35%. The amino acid contents in four samples ranged from 0.63 to 0.73%, while soluble solid contents ranged from 11.4 to $13.1^{\circ}Bx$. The wine prepared from glutinous rice with a 30% degree of milling showed the highest coloring degree, UV absorbance and reducing sugar content among four samples. Furthermore, this wine had the highest levels of malic acid and acetic acid, while the glutinous rice wine prepared from rice with a 0% degree of milling had the highest levels of succinic acid and lactic acid. In all the glutinous rice wines tested, the most abundant free sugar was glucose followed by maltose. With increasing degree of milling, the alcohol, amino acid and organic acid contents of the glutinous rice wines decreased, whereas soluble solids, coloring degree, UV absorbance, reducing sugar and free sugar contents increased. Volatile compounds were identified using GC-MSD, and thirty-nine esters, seven alcohols, six acids, one aldehyde, four alkanes, one alkene and two miscellaneous compounds were identified in the glutinous rice wines. Using relative peak area, it was determined that other than ethyl alcohol, hexadecanoic acid ethyl ester was the major component and was primarily found in the range of 11.566-18.437%. Succinic acid diethyl ester and isoamyl laurate decreased with an increasing degree of milling, whereas hexanoic acid ethyl ester and 2-octenoic acid ethyl ester increased. Overall, it was shown that different milling degrees greatly affected the physicochemical and volatile characteristics of the glutinous rice wines.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of Nutrition and Health
• /
• v.43 no.2
• /
• pp.105-113
• /
• 2010

Ixeris dentata var. albiflora Nakai, a herbal plant, is often used to make a strong stomach as an antiphlogistic used when dyspepsia and to improve appetite in Korea and China. And also it is used for adult diseases such as diabetes and liver diseases as Korean traditional medicine. In this study, the composition and DPPH radical scavenging activities of the root of Ixeris dentata var. albiflora Nakai and its effects on cell viability on vero and chang cells were investigated. Moisture, crude ash, crude protein and crude lipid were 79.14, 2.49, 8.28 and 2.56 g/100 g respectively. The highest mineral content was K. The major free sugars were glucose, fructose and sucrose. Major fatty acid are linoleic acid, palmic acid and linolenic acid. Major amino acids were glutamic acid, arginine and aspartic acid and the total contents of amino acids were 28.12 mg/g. The methanol extracts were further fractionated with n-hexane, chloroform, ethylacetate, butanol and water to get an active fraction. In addition, cell viabilities in each fraction were determined. Methanol extract, butanol, and aqueous fraction showed strong survival rates in vero cell and chang cell viability test, and hexane, chloroform, and ethylacetate fraction were examined for toxin in a cell. The root of Ixeris dentata var. albiflora Nakai had scavenging activities against DPPH radicals in a dose-dependent assay. Ethylacetate fraction's SC50 was $6.8\{\mu}g/mL$, very strong DPPH radical scavenging activities, but water fraction did not show any activity.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.249-254
• /
• 1997

The constructed wetland system which is applicable to rural wastewater treatment was examined by pilot plant experiment. Removal rates of nutrients including nitrogen and phosphorus and total coliform were evaluated. The $NH_4\;^+$ concentration of the influent was in the range of 91.57 to 275.88mg/l and the effluent concentration was about 40% lower than the influent. The decreasing of the $NH_4\;^+$ concentration might be due to volatilization, plant uptake, adsorption onto soil particles, and mainly nitrification. However, generally concentrations of $NO_2\;^-$ and $NO_3\;^-$ were increased in the effluents compared to the influent concentrations, which implies that nitrogen components in the system were nitrified. Overall, the average removal rate of the nitrogen was about 5% which seems inadequate as a wastewater treatment system, and this system needs improvement on nitrogen removal mechamism. The removal rate of the phosphorus was quite high and effluent concentration was very low. Reason for high removal rate of the phosphorus might be mainly strong adsorption characteristic onto soil particles. The average removal rate of the total coliforms was about 83%, and main removal mechanisms are thought to be adsorption onto soil and inability to compete against the established soil microflora. From the results of the study, the constructed wetland system needs to be improved in nitrogen removal mechanism for field application.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.

• Journal of Home Health Care Nursing
• /
• v.5
• /
• pp.73-83
• /
• 1998

This study enrolled one thousand five hundred twenty one clients that were receiving home care services at five health centers and a home care services center in the city of Taejon from November 17 through December 7, 1997. The purpose of this study was to analyze satisfaction levels, general characteristics and efficacies, of the client served home care. The main results were as follows; The age group of most of the subjects was 70-79 years: 76.9% of them were female and 87.3% were over 65 years. In education variables, over 90% of the clients were below primary school. In marital status variables, 63.4% of them had no spouse, 57.5% of them were widows and widowers. In living arrangement variables, alone(35.8%) was the most. In insurance status variables, medical aid(69.9%) was the most. In household income variables, below 000 won(72.6%) was the most. In hospitalization variables, 53% of the clients had no hospitalization. The satisfaction level of home care service of male and female was similar. The older the age, the higher the satisfaction level. The satisfaction level of the group having religion was higher than the group having no religion and the Christianity group had the highest satisfaction level(p<0.001). In education variables, the over high school group was the highest satisfaction level(p<0.01). In living arrangement variables, the other (sisters or neighbors etc.) group indicated the highest satisfaction level(p<0.001). In insurance status variables, the other group(except for medical aid) was the highest satisfaction level(p<0.001). In household income variables, below 390,000 won was the highest satisfaction level(p<0.001). In hospitalization variables, 'over 4 times' group indicated the highest satisfaction level (p<0.01). Home care took place more in health centers than in home care services center. In frequency of home care per month three times was the most. In opinion of home care frequency per month 82.8% of the people answered 'proper'. A lot of present illness was neuralgia, arthritis, digestive disease, hypertension & CVA. In contents of home care services variables, education & counselling was the most and medication was second. In duration of illness variables, over 10 years was the most. In place of treatment before home care service variables, hospital(57%) was the most. In illness condition after home care variables, 'moderate' was the most and 'much better'(85.5%) was second. In help of home care variables, 'much help'(71.5%) was the most and 'moderate'(28.1%) was second. In contents of counselling variables, treatment method of illness was the most. Home care services center indicated higher level of satisfaction than health center(p<0.001). In opinion of home care frequency per month variables, 'less' was the highest satisfaction level (p<0.001). In duration of illness variables, below one year was the highest and over 10 years was second(p<0.001). In place of treatment before home care service variables, health center was the highest (p<0.001). In illness condition after home care variables 'much better' was the highest and 'worse' was second (p<0.001). I n help of home care variables, 'much help' was the highest (p<0.001). In contents of counselling variables, cause of illness was the highest(p<0.001). According to the 14 items which consisted of 3 point scales the total level of satisfaction of home care service was very high, with total mean score 36. According to the above results, most clients taking home care services are satisfied. However, organization and a fund are required to support high quality home care services to those who need them. Furthermore, a follow-up survey should be accomplished to evaluate the status of clients.