Objective: The objective of this study was to develop a model for estimating the carcass weight of Hanwoo cattle as a function of body measurements using three different modeling approaches: i) multiple regression analysis, ii) partial least square regression analysis, and iii) a neural network. Methods: Data from a total of 134 Hanwoo cattle were obtained from the National Institute of Animal Science in South Korea. Among the 372 variables in the raw data, 20 variables related to carcass weight and body measurements were extracted to use in multiple regression, partial least square regression, and an artificial neural network to estimate the cold carcass weight of Hanwoo cattle by any of seven body measurements significantly related to carcass weight or by all 19 body measurement variables. For developing and training the model, 100 data points were used, whereas the 34 remaining data points were used to test the model estimation. Results: The R2 values from testing the developed models by multiple regression, partial least square regression, and an artificial neural network with seven significant variables were 0.91, 0.91, and 0.92, respectively, whereas all the methods exhibited similar R2 values of approximately 0.93 with all 19 body measurement variables. In addition, relative errors were within 4%, suggesting that the developed model was reliable in estimating Hanwoo cattle carcass weight. The neural network exhibited the highest accuracy. Conclusion: The developed model was applicable for estimating Hanwoo cattle carcass weight using body measurements. Because the procedure and required variables could differ according to the type of model, it was necessary to select the best model suitable for the system with which to calculate the model.
Objectives : To evaluate the safety of multiple-dose intramuscular Shinbaro Pharmacopuncture in male and female Sprague-Dawley(SD) rats over a period of 4 weeks(12 sessions). Methods : In order to test the safety of multiple-dose intramuscular Shinbaro Pharmacopuncture we used 40 healthy male and female 6-week old SD rats(male weight 171.79~196.37 g, female weight 127.93~146.43 g). Shinbaro Pharmacopuncture was administered intramuscularly to male and female SD rats at doses of 4.6 (low dose group, n=10), 9.2 (moderate dose group, n=10), and 18.5 mg/kg(high dose group, n=10), respectively. General symptoms, body weight changes, blood tests, biochemical testing, necropsy, organ weight and histopathogical findings were examined over a 4-week period. Results : 1. No mortalities or adverse effects were caused by the investigational substance were observed during the study period. 2. There was no significant difference in body weight caused by the the investigational substance across all groups. 3. No significant between-group difference was found to be caused by the investigational substance in blood tests and biochemical testing. 4. No abnormalities were detected by a necropsy examination with the unaided eye at the macro level after treatment with the investigational substance. 5. Difference in organ weight between groups caused by the investigational substance was not found. 6. All groups did not exhibit pathological findings caused by the investigational substance in histopathogical examination. Conclusions : According to these results, Shinbaro Pharmacopuncture has no systemic or organ toxicity with multiple-dose intramuscular administrations in male and female SD rats over a 4-week period (12 sessions). These results imply that no adverse effects are observed at a level (NOAEL) of Shinbaro Pharmacopuncture of 18.5 mg/kg.
The weight of floating offshore plant, such as an FPSO(Floating, Production, Storage, and Off-loading unit) and an offshore wind turbine, is important for estimating the amount of production material and for determining the production method. Furthermore, the weight is a factor which affects in the building cost and production time of the floating offshore plant. Although the importance of the weight has long been recognized, the weight has been roughly estimated by using the existing design and production data, and designer's experience. To solve this problem, a simplified model for the weight estimation of the floating offshore plant using the statistical method was proposed in this study. To do this, various data for estimating the weight of the floating offshore plant were collected through the literature survey, and then the correlation analysis and the multiple regression analysis were performed to generate the simplified model for the weight estimation. Finally, to examine the applicability of the developed model, it was applied to examples of the weight estimation of an FPSO topsides and an offshore wind turbine. As a result, it was shown that the developed model can be applied the weight estimation process of the floating offshore plant at the early design stage.
International Journal of Industrial Entomology and Biomaterials
/
제32권1호
/
pp.1-11
/
2016
Tropical tasar silkworm, Antheraea mylitta is a commercial forest silkworm in India that produces tasar silk, but never experimented in Uttarakhand, a Himalayan state of India. A. mylitta express divergent phenotypic characters under different ecological conditions; so, we studied the effect of seven forest tree species in two rearing seasons on variability in silk gland weight of Daba (bivoltine) ecorace of A. mylitta at Forest Research Institute in Dehra Dun, Uttarakhand during 2012 and 2013. We used two-way completely randomized block factorial design and Post HOC Tukey's HSD test to analyse the collected data and there after carried out multiple regression analysis. Results indicated that silk gland weight differed significantly between rearing seasons (DF=1, F=2333.98, p <0.05), host plants (DF 6, F= 1516.25, p <0.05) and their interactions (DF=6, F=7.10, p <0.05). Higher silk gland weight was found in second rearing season than the first on all the host tree species. Terminalia alata fed A. mylitta larvae showed the highest silk gland weight of 8.03 and 9.47 g in first and second rearing seasons, followed by T. tomentosa (7.19 & 9.01g), T. arjuna (6.8 & 8.08 g) and L. speciosa (6.57 & 7.83 g) fed larvae, respectively. Post HOC Tukey's HSD test indicated that silk gland weight of L. speciosa and T. arjuna fed larvae in both the rearing seasons did not differ significantly. E.I. analysis also confirmed that T. alata, T. tomentosa, T. arjuna and L. speciosa are better in their order of merit than T. bellirica , T. chebula and L. tomentosa. Multiple regression analysis indicates that larval weight gain is a strong predictor (β=1.002, t=346.777, p = <0.05) for the silk gland weight of A. mylitta ; however, larval duration had significant negative regression weight (β=-0.270, t=-8.436, p = <0.05) on mean weight of silk gland.
The purpose of this study is to investigate the standard weight and the perception of the figure, making girls' high school students the object of scientific study. Furthemore this study will try to find the factor having an effect on the weight through measuring the concern with appearance and health. The study consisted of 658 girls' high school students in Seoul. The data was analyzed by the methods of frequency, percentage, reliability, pearson's correlation coefficient and multiple regression analysis. The results of this study are as follows : 1. The standard size of girls height was 160.95cm, their weight was 52.06kg. 2. 34 percent of the girls tested perceived of themselves of having proper figures. Especially in the case of overweight girls. Only 9.7 percent of girls were satisfied with their figure, the other 83.3 percent were not. 3. 88.4 percent of the girls were concerned with their weight. It was through mass communecation that girls were concerned with wheir weight. 41.2 percent of the girls were concerned with weight much more through mass communication than through any other things. This showed that the effect of mass communication on juveniles was increased. 4. The result of correlation of variable about the concern with appearance(p<0.001), the perception of their figures(p<0.001), the existence of weight controller in friends (p<0.001) and the concern with health(p<0.001) indicated significant positive correlation, on the other hand, the satisfaction of their figures(p<0.001) indicated negative correlation. This showed that the less satisfactory their figures were, the higher their concern about weight was. 5. In order th seize the variable having an effect on the concern with weight, the result of multiple regression analysis was that the concern with appearance (p<0.001), the satisfaction of figure (p<0.001), the concern with health (p<0.05), poket money (p<0.05) and health condition (p<0.05) had a statistically significant effect and the variables also 35.7% out of this model. Concern with appearance had the most important effect of all these variables.
본 연구는 다중의 동력장치를 이용하여 다수의 객체를 움직이는 키네틱 디자인작품을 제작하면서 다수의 객체를 소수의 동력장치를 이용하여 다수의 동력장치를 이용한 것 같은 다양한 움직임을 구현할 수 있게 하는 것이 목적이다. 다수의 객체를 다양하게 움직이기 위해선 다수의 동력장치를 사용하여 움직임을 나타내는 것이 일반적인 방법이나 이렇게 하면 객체만큼의 많은 동력장치를 이용해야 하며 과다한 동력장치 사용으로 비용의 상승과 작품무게가 증가하게 된다. 많은 동력장치를 움직이기 위한 많은 전력 소모를 하게 된다. 이에 소수의 동력장치로 다수의 객체를 다양한 움직임을 통해 제어할 수 있는 메커니즘을 작품에 적용하여 실험하였다. 메커니즘을 이용해 다수의 객체를 움직이면 작품의 무게와 전력 소모량을 현저하게 줄일 수 있었다. 또한, 캠의 위치와 모양을 변경한 캠샤프트 구조의 이용과 베벨기어의 이용을 통해 객체의 행과 열을 늘려 다양한 움직임을 표현할 수 있었다. 본 연구를 통해 키네틱 디자인 작품을 제작하는 많은 디자이너에게 다수의 객체를 제어하는 하나의 또 다른 방법을 제시하게 된다.
Multiple linear regression analysis was conducted to interpretate the relationship between sesame grain yield and its components under early sowing cropping condition. The t test showed that stem length, number of capsules per plant, 1000 seeds weight and seed weight per plant gave significant contribution to sesame grain yield, therefore those variables were assumed to mostly influenced components to grain yield of sesame. In the stepwise regression analysis, the predicted equation for sesame grain yield per square meter (Y) was Y = -7.900 + 0.150X1 + 0.461X5 + 15.553X6 + 8.543X7. Meanwhile, F value showed that stem length, number of capsules per plant and seed weight per plant gave significant contribution to sesame grain yield, while 1000 seeds weight did not significantly show. Based on the results, it is reasonable to assume that high yield. potential of sesame under early sowing cropping condition would be obtained by selecting breeding lines with long stem length, number of capsules per plant, and seed weight per plant, which was different result at the late sowing cropping condition in which days to flowering and maturity were assumed to be more affected factors to the sesame grain yield.
Objectives: This study measured the impact of shifts in maternal age and parity on the increase in the low birth weight (LBW) rate in Korea. Methods: We obtained raw data for all 6 397 945 live births registered at the Korea National Statistical Office between 1995 and 2005. We calculated the proportion of increment in the LBW rate due to changes in the distribution of maternal age and parity (AP-dis) and the proportion due to changes in the age- and parity-specific LBW rate (AP-spe). Results: The LBW rate increased from 3.02% in 1995 to 4.28% in 2005. The multiple birth rate increased from 1.32% to 2.19% during the same period. Of the 1.26% points increment in the LBW rate, 0.64% points occurred among singleton births and 0.62% points occurred among multiple births. Changes in the AP-dis accounted for 50% of the increase in the LBW rate among singleton births, but did not contribute to the increase in the LBW rate among multiple births. The remainder of the total increment in the LBW rate was explained by the increase in the AP-spe. Conclusions: This study demonstrated that shifts in maternal age and parity among singleton births and increased multiple births were important contributors to the increment in the LBW rate. This study also revealed that the increase in the AP-spe was an equally important contributor as the shifts in maternal age and parity to the increment in the LBW rate among singleton births and was a major contributor among multiple births.
본 논문에서는 신뢰도기반 도로교설계기준을 위한 새로운 활하중모형을 개발하였다. 합리적 하중모형과 함께 하중의 통계적 특성의 구축은 신뢰도기반 설계기준의 개발에 매우 중요하다. 이전 논문에서는 WIM 또는 BWIM시스템을 이용하여 수집된 국내 8개 지역의 자료를 분석하여 교량수명기간동안의 예상최대중량을 구하였다. 차종별 총중량의 확률분포는 상위 20%의 자료를 이용하여 극한분포(Gumbel분포)로 가정되었으며 이 확률분포를 사용하여 교량수명기간동안의 최대중량을 예측하였다. 이 논문에서는 교량상에 두 대 이상의 차량이 동시에 재하되는 경우를 분석하였다. 여러 자료를 이용하여 동시재하의 확률을 구하였으며 이에 따른 동시재하차량의 총중량을 이전 논문과 같은 확률분포를 이용하여 구하였다. 10-200 m까지의 지간별로 예측된 하중효과를 모사할 수 있는 공칭하중모형이 제안되었다. 제안된 하중모형은 기존의 하중모형 뿐만 아니라 국외의 여러 기준들과 비교분석되었다.
In the analysis of plasmid profile obtained by agarose gel electrophoresis, the strain harvoring multiple reference plasmids of known molecular weight were needed to estimate the size of unknown molecular weight plasmids. Six strains of E. coli isolated from clinical specimens carried multiple plasmids and these strains could be available as a reference plasmids harvoring strain. These E. coli strains showed 4 to 9 plasmids of various size ranging 2.5 to 94.3 megadalton (Mdal). The correlation coefficients of linear regression between the relative mobility and molecular weight were 0.99966 to 1.00000. Among them, E. coli KE327 from throat which contained 7 plasm ids as follows: 79 Mdal, 46 Mdal, 33 Mdal(pKY3027 C), 4.9Mdal, 3.8Mdal(pKY3027 E), 3.5Mdal, and 2.7 Mdal. Relative amount of the pKY3027 C was the smallest(7.09%) and that of the pKY3027 E was the largest (24.24%) among the plasmid fractions of E. coli KE327.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.