• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.399-409
• /
• 1999

The purpose of this study was to evaluate the change of soft tissue profile on lower face following retraction of incisors through orthodontic treatment. 31 Korean women with bialveolar protrusion who were treated with 4 first bicuspid extraction were selected. All of samples were treated from above 17 years of age. Lateral cephalometric head films taken before and after treatment were analyzed statistically. The results were obtained as follows. $\cdot$The ratio of upper incisor retraction to upper lip retraction and lower incisor retraction to lower lip retraction were 1.54:1 (r=0.746) and 0.92:1 (r=0.584) respectively $\cdot$It appeared during orthodontic treatment that UIS-LS was increased considerably and the others in soft tissue thickness measurements were slightly decresed. $\cdot$Analysis of correlation showed that the change of the upper lip (LS) with the change of maxillary central incisor (UIS) and the change of lower lip with the change of B point were most strongly correlated. $\cdot$The multiple regression equations were obtained to predict soft tissue profile change of lower face according to retraction of incisors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1601-1607
• /
• 2013

A determination of circulating tumor cell (CTC) effectiveness for prediction of progression-free survival (PFS) and overall survival (OS) was conducted as an adjunct to standard treatment of care in breast cancer management. Between November 2008 and March 2009, 22 metastatic and 12 early stage breast carcinoma patients, admitted to Ankara Oncology Training and Research Hospital, were included in this prospective trial. Patients' characteristics, treatment schedules and survival data were evaluated. CTC was detected twice by CellSearch method before and 9-12 weeks after the initiation of chemotherapy. A cut-off value equal or greater than 5 cells per 7.5 ml blood sample was considered positive. All patients were female. Median ages were 48.0 (range: 29-65) and 52.5 (range: 35-66) in early stage and metastatic subgroups, respectively. CTC was positive in 3 (13.6%) patients before chemotherapy and 6 (27.3%) patients during chemotherapy in the metastatic subgroup whereas positive in only one patient in the early stage subgroup before and during chemotherapy. The median follow-up was 22.0 (range: 21-23) and 19.0 (range: 5-23) months in the early stage and metastatic groups, respectively. In the metastatic group, both median PFS and OS were significantly shorter in any time CTC positive patients compared to CTC negative patients (PFS: 4.0 vs 14.0 months, Log-Rank p=0.013; and OS: 8.0 months vs. 20.5 months, Log-Rank p<0.001). OS was affected from multiple visceral metastatic sites (p=0.055) and higher grade (p=0.044) besides CTC positivity (log rank p<0.001). Radiological response of chemotherapy was also correlated with better survival (p<0.001). As a result, CTC positivity was confirmed as a prospective marker even in a small patient population, in this single center study. Measurement of CTC by CellSearch method in metastatic breast carcinoma cases may allow indications of early risk of relapse or death with even as few as two measurements during a chemotherapy program, but this finding should be confirmed with prospective trials in larger study populations.

• Journal of Environmental Health Sciences
• /
• v.40 no.2
• /
• pp.114-126
• /
• 2014

Objectives: We aimed to develop a measurement method of five metabolites of trichloroethylene (TCE) in a concurrent biological sample, e.g., trichloroacetic acid (TCA), dichloroacetic acid (DCA), S-(1,2-dichlorovinyl) glutathione (DCVG), S-(1,2-dichlorovinyl)-L-cysteine (DCVC), and N-Acetyl-S-(1,2-dichlorovinyl)-L-cysteine (NAcDCVC) and to validate the method before application to pharmacokinetic study. Methods: TCE metabolites were simultaneously analyzed using high performance liquid chromatography coupled with electrospray ionization mass spectrometry (HPLC-ESI-MS/MS) with as little as 50 ${\mu}L$ of serum and urine. DCA, TCA and NAcDCVC were extracted with diethyl ether, while DCVC and DCVG were extracted by solid phase extraction. This method was validated according to the guidelines for bioanalytical method validation of the Korean National Institute of Toxicological Research. Then, we determined the five metabolites in five strains of mice at 24 hr after exposure to 1 g TCE /kg body weight. Results: The limits of detection for the five metabolites in biological samples ranged from 0.001 to 0.076 nmol/mL, which is comparable to or better than those previously reported. Most calibration curves showed good linearity ($R^2=0.99$), and between-batch variation was less than 20% expressing acceptable robustness and reproducibility. Using this method, we found TCA and DCA were detected in all test mice at 24 hr after the oral administration while NAcDCVC and DCVC were detected in some strains, which showed strain-dependent metabolism of TCE. Conclusions: The present method could provide robust and accurate measurements of major key metabolites of TCE in biological media, which allowed concurrent analysis of TCE metabolism for limited amounts of biospecimens.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.1
• /
• pp.31-42
• /
• 2000

The dry deposition velocities and fluxes of air pollutants such as SO2(g), O3(g), HNO3(g), sub-micron particulates, NO3(s), and SO42-(s) were estimated according to local meteorological elements in the atmospheric boundary layer. The model used for these calculations was the multiple layer resistance model developed by Hicks et al.1). The meteorological data were recorded on an hourly basis from July, 1990 to June, 1991 at the Austin Cary forest site, near Gainesville FL. Weekly integrated samples of ambient dry deposition species were collected at the site using triple-fiter packs. For the study period, the annual average dry deposition velocities at this site were estimated as 0.87$\pm$0.07 cm/s for SO2(g), 0.65$\pm$0.11 cm/s for O3(g), 1.20$\pm$0.14cm/s for HNO3(g), 0.0045$\pm$0.0006 cm/s for sub-micron particulates, and 0.089$\pm$0.014 cm/s for NO3-(s) and SO42-(s). The trends observed in the daily mean deposition velocities were largely seasonal, indicated by larger deposition velocities for the summer season and smaller deposition velocities for the winter season. The monthly and weekly averaged values for the deposition velocities did not show large differences over the year yet did show a tendency of increased deposition velocities in the summer and decreased values in the winter. The annual mean concentrations of the air pollutants obtained by the triple filter pack every 7 days were 3.63$\pm$1.92 $\mu\textrm{g}$/m3 for SO42-, 2.00$\pm$1.22 $\mu\textrm{g}$/m-3 for SO2, 1.30$\pm$0.59 $\mu\textrm{g}$/m-3 for HNO3, and 0.704$\pm$0.419 $\mu\textrm{g}$/m3 for NO3-, respectively. The air pollutant with the largest deposition flux was SO2 followed by HNO3, SO42-(S), and NO3-(S) in order of their magnitude. The sulfur dioxide and NO3- deposition fluxes were higher in the winter than in the summer, and the nitric acid and sulfate deposition fluxes were high during the spring and summer.

• Journal of the Korean Home Economics Association
• /
• v.25 no.3
• /
• pp.63-82
• /
• 1987

This is the forth consecutive study on the 'Standardization of Measurement for Korean Kitchen Work Centers and Cabinets for Future Design Criteria'. The purpose of the present research was (1) to classify homemakers' representative like styles related to the kitchen, (2) to examine homemakers' present concerns on the kitchen space, and (3) to investigate homemakers' desire and preference on the kitchen space. Twenty two hundred homemakers of upper and middle class residing in Seoul, Busan, Daegu, Incheon, Gwangju and Daejeon were selected for the survey and 1,843 among them were used for data analysis. Data were selected for the survey and 1,843 among them were used for data analysis. Data were analyzed using the SAS program package. The statistics used were frequency, percentage, mean, factor analysis, F-test, Duncan's multiple range test, X2-test, cluster analysis. Findings from the research as follows: (1) Four factors were found as indicaters of the life style; values on the household work, desire on social function of the kitchen, degree on cooperation of family members on the household work, and convenient management. It was noticeable that homemakers had positive responses in terms of desire on social function of the kitchen and degree on cooperation of family members on the household work. Homemakers' life styles related to the kitchen space were classified into 6 categories. (2) Relatively a few respondents answered that the kitchens were very well furnished. If, however, the economic conditions become better, substantial number of them wanted to invest for better kitchen following the one for living room. (3) It was found that most respondents preferred the arrangement of space, where dining and kitchen in one space, and a hard wall or soft treatment was between living and dining/kitchen area. (4) Many respondents desired pantry, utility and laundry area be near the kitchen or in the same space with it, thereby forming a utility core in a housing space.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.6
• /
• pp.690-698
• /
• 2006

Statement of problems. The heat produced during polymerization of polymer-based provisional materials may cause thermal damage to the vital pulp. Purpose. This study was performed to evaluate the exotherm reaction of the polymerbased provisional materials during polymerization by differential scanning calorimetry and to compare the temperature changes of different types of resins. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Luxatemp Plus, Luxatemp Fluorescence) and five monomethacrylate- based material (Snap, Alike, Unifast TRAD, Duralay, Jet) were selected. Temperature changes of polymer-based provisional materials during polymerization in this study were evaluated by D.S.C Q-1000 (TA Instrument, Wilmington, DE, USA). The following three measurements were determined from the temperature versus time plot: (1) peak temperature, (2) time to reach peak temperature, (3) heat capacity. The data were statistically analyzed using one-way ANOVA and multiple comparison Bonferroni test at the significance level of 0.05. Results. The mean peak temperature was $39.5^{\circ}C({\pm}\;1.0)$. The peak temperature of the polymer-based provisional materials decreased in the following order: Duralay > Unifast TRAD, Alike > Jet > Luxatemp Plus, Protemp 3 Garant, Snap, Luxatemp Fluorescence. The mean time to reach peak temperature was 95.95 sec $({\pm}\;64.0)$. The mean time to reach peak temperature of the polymer-based provisional materials decreased in the following order: Snap, Jet > Duralay > Alike > Unifast TRAD > Luxatemp Plus, Protemp 3 Garant, Luxatemp Fluorescence. The mean heat capacity was 287.2 J/g $({\pm}\;107.68)$. The heat capacity of the polymer-based provisional materials decreased in the following order: Duralay > TRAD, Jet, Alike > Snap, Luxatemp Fluorescence, Protemp 3 Garant, Luxatemp Plus. Conclusion. The heat capacity of materials, determined by D.S.C., is a factor in determining the thermal insulating properties of restorative materials. The peak temperature of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA (Snap) and dimethacrylate (P >0.05). The time to reach peak temperature was greatest with PEMA, followed by PMMA and dimethacrylate. The heat capacity of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA and dimethacrylate (P >0.05).

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.301-309
• /
• 2001

Because many of patients seeking orthodontic treatment worry about the facial appearance and their chief motivation for orthodontic treatment is facial esthetics, it is critical to understand the influence of gender or culture on the evaluation of profile esthetics. The purpose of this study was to find out any influence of gender or culture on judging good facial profile. 4 different groups were asked to evaluate 133 facial profiles to test the influence of gender or culture on judging good facial profiles. Those 4 groups consisted of 10 Korean males, 10 Korean females, 10 Korean American males, and 10 Korean American females. 2 evaluation systems were introduced, absolute and relative. Soft tissues of selected good profile group were analyzed and statistic analysis was performed. Conclusions were as follows 1. Inter-evaluator difference for judging good facial profile was statistically significant, even if there was general agreement for the best profile among 40 raters. 2. Gender difference under the same cultural environment was not significant statistically. 3. The same ethnic groups with different cultural background showed statistically different preference on judging good Profile. 4. Good facial profile group had their own characteristics compared to remaining group in several soft tissue measurements which were vertical facial ratio, soft tissue facial convexity, and antero-posterior relative lip position.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.2
• /
• pp.179-183
• /
• 2015

In this study, we propose a catalyst structure including enzyme and metal nano rod for glucose sensing. In the catalyst structure, glucose oxidase (GOx) and gold nano rod (GNR) are alternatingly immobilized on the surface of carbon nanotube (CNT), while poly(ethyleneimine) (PEI) is inserted in between the GOx and GNR to fortify their bonding and give them opposite polarization ($[GOx/GNR]_nPEI/CNT$). To investigate the impact of $[GOx/GNR]_nPEI/CNT$ on glucose sensing, some electrochemical measurements are carried out. Initially, their optimal layer is determined by using cyclic voltammogram and as a result of that, it is proved that $[GOx/GNR/PEI]_2/CNT$ is the best layer. Its glucose sensitivity is $13.315{\mu}AmM^{-1}cm^{-2}$. When it comes to the redox reaction mechanism of flavin adenine dinucleotide (FAD) within $[GOx/GNR/PEI]_2/CNT$, (i) oxygen plays a mediator role in moving electrons and protons generated by glucose oxidation reaction to those for the reduction reaction of FAD and (ii) glucose does not affect the redox reaction of FAD. It is also recognized that the $[GOx/GNR/PEI]_3/CNT$ is limited to the surface reaction and the reaction is quasi-reversible.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2007

The GPS positioning offer 3D position using code and carrier phase measurements, but the user can obtain the precise accuracy positioning using carrier phase in Real Time Kinematic(RTK). The main problem, which RTK have to overcome, is the necessary to have a reference station(RS) when using RTK should be generally no more than 10km on average, which is significantly different from DGPS, where distances to RS can exceed several hundred kilometers. The accuracy of today's RTK is limited by the distance dependent errors from orbit, ionosphere and troposphere as well as station dependent influences like multipath and antenna phase center variations. For these reasons, the author proposes Network based GPS Carrier Phase Differential Positioning using Multiple RS which is detached from user receiver about 30km. An important part of the proposed system is algorithm and software development, named DAUNet. The main process is corrections computation, corrections interpolation and searching for the integer ambiguity. Corrections computation of satellite by satellite and epoch by epoch at each reference station are calculated by a Functional model and Stochastic model based on a linear combination algorithm and corrections interpolation at user receiver are used by area correction parameters. As results, the users can obtain the cm-level positioning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.