• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.270_271
• /
• 2009

The identification of multiple bad data, especially when mutually interacting, may be difficult to handle, since the well known procedures based on the normalized or weighted residuals may become faulty. In such a case, successive elimination of the measurement with the largest normalized residual may result in the suppression of correct measurements instead of the bad data. Then the problem of identifying bad data is considered as a combinatorial decision procedure. In this paper, binary PSO is used for the identification of multiple bad data in the power system state estimation. The proposed binary PSO based procedures behave satisfactorily in the identifying multiple bad data. The test is carried out with reference to the IEEE-14 bus system.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• 대한원격탐사학회지
• /
• 제34권6_4호
• /
• pp.1489-1501
• /
• 2018

2016년 일본 구마모토 현에서는 규모 6.5, 6.4의 전진과 7.3의 본진, 그리고 2,000회 이상의 여진이 연속적으로 발생하였다. 이 지진에 의하여 큰 지표변위가 발생하였으며, 지진에 의하여 발생한 단층의 구조에 관한 연구를 위하여 3차원 지표변위 관측치가 제시된 바 있다(Baek, 2017). 그 관측치는 ALOS PALSAR-2 두 쌍의 상향궤도 위성레이더 간섭쌍(20160211_20160602, 20151119_20160616)과 한 쌍의 하향궤도 위성레이더 간섭쌍(20160307_20160418)을 활용하였다. 특히 상향궤도 간섭쌍의 다중개구간섭영상에서 존재하는 이온층 효과에 의하여 여진에 의한 지표변위가 포함되지 않은 하향궤도 다중개구간섭영상만을 활용하였다. 이 때문에 남북방향의 변위를 추출하는 데에 약 2달의 시간적 불일치가 존재하였다. 본 연구에서는 이러한 불일치를 저감하고 보다 정확한 단층 거동을 파악하기 위하여 상향궤도 다중개구간섭영상에 대하여 방향필터 기반 이온층 오차 저감 기법을 적용하였다. 이온층 보정 결과 여진에 의한 지표변위로 판단되는 변위 신호가 추가적으로 관측되었다. GPS 상시관측소의 지표변위 관측결과와 비교하였을 때 이온층 보정이후 9.87, 8.13 cm의 관측정밀도를 나타냈다. 이는 두 간섭쌍에 대하여 각각 기존 결과보다 4.8배, 6.4배 향상된 결과이다. 이와 같은 관측 결과는 2016 구마모토 지진을 야기한 단층의 보다 정확한 거동을 제시하는 데에 활용될 것이다.

• Smart Structures and Systems
• /
• 제11권4호
• /
• pp.411-433
• /
• 2013

Due to its easy operation and wide applicability, the ambient vibration method is commonly adopted to determine the cable force by first identifying the cable frequencies from the vibration signals. With given vibration length and flexural rigidity, an analytical or empirical formula is then used with these cable frequencies to calculate the cable force. It is, however, usually difficult to decide the two required parameters, especially the vibration length due to uncertain boundary constraints. To tackle this problem, a new concept of combining the modal frequencies and mode shape ratios is fully explored in this study for developing an accurate method merely based on ambient vibration measurements. A simply supported beam model with an axial tension is adopted and the effective vibration length of cable is then independently determined based on the mode shape ratios identified from the synchronized measurements. With the effective vibration length obtained and the identified modal frequencies, the cable force and flexural rigidity can then be solved using simple linear regression techniques. The feasibility and accuracy of the proposed method is extensively verified with demonstrative numerical examples and actual applications to different cable-stayed bridges. Furthermore, several important issues in engineering practice such as the number of sensors and selection of modes are also thoroughly investigated.

• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.119-131
• /
• 2024

Drift angle is a significant index for diagnosing post-event structures. A common way to estimate this drift response is by using modal parameters identified under natural excitations. Although the modal parameters of shear structures cannot be identified accurately in the real environment, the identification error has little impact on the estimation when measurements from several floors are used. However, the estimation accuracy falls dramatically when there is only one accelerometer. This paper describes the susceptibility of single sensor identification to modelling error and simulations that preliminarily verified this characteristic. To make a robust evaluation from measurements of one floor of shear structures based on imprecisely identified parameters, a novel scheme is devised to approximately correct the mode shapes with respect to fictitious frequencies generated with a genetic algorithm; in particular, the scheme uses constrained minimization to take both the mathematical aspect and the realistic aspect of the mode shapes into account. The algorithm was validated by using a full-scale shear building. The differences between single-sensor and multiple-sensor estimations were analyzed. It was found that, as the number of accelerometers decreases, the error rises due to insufficient data and becomes very high when there is only one sensor. Moreover, when measurements for only one floor are available, the proposed method yields more precise and appropriate mode shapes, leading to a better estimation on the drift angle of the lower floors compared with a method designed for multiple sensors. As well, it is shown that the reduction in space complexity is offset by increasing the computation complexity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2787-2790
• /
• 2003

In this paper, we predict tracking performance of the multiple hypothesis tracking (MHT) algorithm. The MHT algorithm is known to be an optimal Bayesian approach and is superior to asly other tracking filters because it takes into account the events that the measurements can be originated from new targets and false alarms 3s well as interesting targets. In the MHT algorithm, a number of candidate hypotheses are generated and evaluated later as more data are received. The probability of each candidate hypotheses is approximately evaluated by using the hybrid conditional average approach (HYCA). We performed numerical experiments to show the validity of our performance prediction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.943-945
• /
• 1996

In this paper, we present an algorithm that allows tracking of a target using measurements obtained from a sensor with limited resolution. The Interacting Multiple Model (IMM) algorithm has been shown to be one of the most cost-effective estimation schemes for hybrid systems. The approach consists of IMM algorithm combined with a coupled version of the Joint Probabilistic Data Association Filter for the target that splits into two targets.

• 한국자기공명학회논문지
• /
• 제22권4호
• /
• pp.125-131
• /
• 2018

Chemical shift perturbation (CSP) is a simple NMR technique for studying binding of a protein to various ligands. CSP is the only technique that can directly provide both a value for the dissociation constant and a binding site from the same set of measurements. To accurately analyze the CSP data, the exact binding mode such as multiple binding, should be carefully considered. In this review, we analyzed systematically the CSP data with multiple modes. This analysis might provide insight into the mechanism on how proteins selectively recognize their target ligands to achieve the biological function.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.424-433
• /
• 2008

An ownship with towed array sonar (TAS) has limited maneuvers due to its dynamic feature, bearing and frequency measurements of a target which are not detected continuously but are often lost in ocean environment. We propose a pre-processing algorithm for the faded bearing and frequency measurements to solve the BFTMA problem of TAS under limited detection conditions. The proposed pre-processing algorithm to restore the faded bearing and frequency measurements is implemented to perform a BFTMA filter even if the measurements of a target are not continuously detected. The Modified Gain Extended Kalman Filter (MGEKF) method based on the Interacting Multiple Model (IMM) structure is applied for a BFTMA filter algorithm to estimate the target. Simulations for the various conditions were carried out to verify the applicability of the proposed algorithms, and confirmed superior estimation performance compared with the existing Bearings-Only TMA (BOTMA).

• 한국의류학회지
• /
• 제45권5호
• /
• pp.758-769
• /
• 2021

Today, functional gloves must allow the wearer to perform many kinds of delicate work while protecting the hands from hazardous materials. In this study, multiple analyses of 3D hand measurements were performed to provide information on the hand size and shape required for the design of functional gloves for adult men. Size and shape characteristics were identified from 19 different hand measurements, and three factors were collected through factor analysis. The aggregated factor score was used to classify men's hand shapes into three types. These types showed different distribution patterns according to age, indicating a significant distribution difference between hand type and age group. Discriminant analysis extracted nine items that highly contributed to determining hand type. However, since the data provided by Size Korea have some limitations in fully representing hand shape, sampling additional types of hand measurements and using consistent conditions and methods are required for more accurate analysis.