• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.620-626
• /
• 2023

Energy harvesting technology, which converts wasted energy sources in everyday life into usable electric energy, is gaining attention as a solution to the challenges of charging and managing batteries for the driving of IoT sensors, which are one of the key technologies in the era of the fourth industrial revolution. Hybrid energy harvesting technology involves integrating two or more energy harvesting technologies to generate electric energy from multiple energy conversion mechanisms. In this study, a hybrid energy harvesting device called TMPPEG (thermo-magneto-piezoelectric-pyroelectric energy generator), which utilizes low-grade waste heat, was developed by incorporating PVDF polymer piezoelectric components and optimizing the system. The variations in piezoelectric output and thermoelectric output were examined based on the spacing of the clamps, and it was found that the device exhibited the highest energy output when the clamp spacing was 2 mm. The voltage and energy output characteristics of the TMPPEG were evaluated, demonstrating its potential as an efficient hybrid energy harvesting component that effectively harnesses low-grade waste heat.

• Advances in nano research
• /
• v.17 no.1
• /
• pp.61-73
• /
• 2024

This paper presents nonlinear vibration analysis of a composite cylindrical shell. The core of the shell is made of functionally graded (FG) porous materials and layers is fabricated of carbon nanotubes (CNTs) reinforced nanocomposites. To increase the accuracy of results, neutral surface position is considered. First-order shear deformation theory is used as displacement field to derive the basic relations of equation motions. In addition, von-Karman nonlinear strains are employed to account geometric nonlinearity and to enhance the results' precision, the exact position of the neutral surface is considered. To governing the partial equations of motion, the Hamilton's principle is used. To reduce the equation motions into a nonlinear motion equation, the Galerkin's approach is employed. After that the nonlinear motion equation is solved by multiple scales method. Effect of various parameters such as volume fraction and distribution of CNTs along the thickness directions, different patterns and efficiency coefficients of porous materials, geometric characteristics and initial conditions on nonlinear to linear ratio of frequency is investigated.

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.288-293
• /
• 2011

We investigated the effects of piezoelectric field on the electro-absorption characteristics in InGaN/GaN multiple-quantum well (MQW) green light emitting diodes (LED). Double crystal X-ray diffraction measurement was performed to study the crystalline property and indium (In) composition in the MQW active layer. To measure the electro-luminescence and electro-reflectance (ER) spectroscopy, we fabricated the $1{\times}1\;mm^2$ large-area green LED chip. The piezoelectric field inside the LED structure was evaluated from the Vcomp in active layer by the ER spectra. Finally, we analyzed the electro-absorption characteristics of the green LED by using the photo-current spectroscopy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3455-3459
• /
• 2013

Background: Smoking and smokeless tobacco use are almost always initiated and established during adolescence. More than 80% of adult smokers begin smoking before 18 years of age. The main objective of the present study is to assess the feasibility of preventing adolescent tobacco use with the help of a specially designed tobacco control program. Materials and Methods: A cross sectional survey on tobacco use and related health effects was conducted using a structured questionnaire in 13 randomly selected schools in Kannur district of Kerala. These students were followed for a period of one academic year with multiple spaced interventions such as anti-tobacco awareness classes, formation of anti-tobacco task forces, inter-school competitions, supplying IEC (information, education and communication) materials and providing a handbook on tobacco control for school personnel. Final evaluation was at the end of one year. Results: There were 4,144 school children who participated in the first phase of the study. The prevalence of tobacco smoking and chewing habits were 9.85% and 2.24% respectively. Ninety-one percent had parental advice against tobacco use and only 3.79% expressed desire for future tobacco use. The final evaluation witnessed a sharp decline in the current tobacco use as 4.68%. We observed a statistically significant difference towards the future use of tobacco (p<0.001) and awareness about the ill effects of passive smoking (p<0.001) among boys and girls. Further a significantly increased knowledge was observed among boys compared to girls about tobacco and oral cancer (p=0.046). Conclusions: The comprehensive school based tobacco control project significantly reduced the tobacco use pattern in the target population. School tobacco projects incorporating frequent follow ups and multiple interventions appear more effective than projects with single intervention.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.607-613
• /
• 2010

A seawater distiller, in which the waste heat from a portable electric generator was used, with a multiple-effect diffusion still was designed. The waste gas from small generators commonly used in islands has not yet been used because it has less thermal energy; however, this waste gas can be used as a heat source for small-capacity distillers and as an additional heat source for solar stills. The proposed distiller comprises a series of closely spaced parallel partitions that are placed in contact with saline-soaked wicks. In the distiller, evaporation and condensation processes are repeated to recycle the thermal energy for increasing the distillate productivity. Experimental results show that the proposed distiller with only one-effect still can produce at least 6.7 kg/day of distilled water; the proposed distiller with a ten-effect still is expected to produce 43 kg/day of distilled water. This amount of distillate is approximately four times the maximum daily productivity of the solar stills, as determined in outdoor experiments.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.179-185
• /
• 2003

Melatonin (MT) is an indole amide pineal hormone. It has not only very short half-life but also pH-sensitive property. The sustained release dosage form which delivers MT in a circadian fashion over 8 h is clinical value. The purpose of this study is to prepare sugar beads using multiple coating methods and enteric-coated in a sustained release to evaluate in vitro release characteristics in simulated gastric and intestinal fluids. The $Eudragit^{\circledR}$ as a polymer, sustained release membrane, and triethylcitrate (TEC) as a plasticzer were used. Multi-coated melatonin delivery system was composed of sugar, various excipients, $Eudragit^{\circledR}$ and enteric materials (e.g. hydroxy propyl methyl cellulose phthalate, HPMCP), and prepared by fluid bed coater. The dissolution test was carried out using the basket method at a stirring speed of 100 rpm at $37^{\circ}C$ in simulated gastric (pH 1.2) and intestinal fluid (pH 7.4). The released amount of MT was determined by High performance liquid chromatography method. The morhologies of surface and cross section of multi-coated beads were observed by scanning electron microscope. Size of multi-coated sugar beads was ranged over $1000{\sim}1300\;{\mu}m$. The release rate of MT from coated beads was limited in simulated gastric fluid (pH 1.2), but it was sustained in intestinal fluid (pH 7.4) during $3{\sim}8$ hours. The MT beads may provide small-intestine-targeted device for oral delivery. Studies on animal and relative experiment are in process.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.41-48
• /
• 2010

In this paper, the analysis of impact damage behavior of a reinforced concrete structure that undergoes both a shock impulsive loading and an impact loading due to the air blast induced from an explosion is performed. Firstly, a pair of multiple loadings are selected from the scenario that an imaginary explosion accident is assumed. The RC structures strengthened with advanced composite materials (ACM) are considered as a scheme for retrofitting RC wall structures subjected to multiple explosive loadings and then the evaluation of the resistant performance against them is presented in comparison with the result of the evaluation of a RC structure without a retrofit. Also, in order to derive the result of the analysis similar to that of real explosion experiments, which require the vast investment and expense for facilities, the constitutive equation and the equation of state (EOS) which can describe the real impact and shock phenomena accurately are included with them. In addition, the numerical simulations of two concrete structures are achieved using AUTODYN-3D, an explicit analysis program, in order to prove the retrofit performance of a ACM-strengthened RC wall structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1348-1353
• /
• 2010

At the early stage of a bulk syndiotactic polymerization of styrene, the homogeneous reactant mixture transforms to a slurry state consisting of a precipitated solid syndiotactic PS and a liquid reactant mixture. As the reaction proceeds, the slurry transforms into a wet and then a dried powder if proper methods are used to prevent agglomeration. When a large amount of catalyst and co-catalyst is added to the styrene to achieve a high conversion rate, the reactant mixture becomes a lumpy agglomeration and further control of the reaction is impossible. In this study, we introduce a novel approach to avoid such agglomeration while maintaining a high conversion rate. Instead of adding the catalyst and co-catalyst at once, the total amount of the catalyst and co-catalyst is divided into several parts and added successively. This method is found to be very effective to avoid the formation of agglomerate and to maintain a fairly high conversion rate of slurry into powdery product (up to 70 %). It is also observed that this method produces syndiotactic PS of a higher molecular weigh.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.4
• /
• pp.165-175
• /
• 2010

Objectives: The purpose of this study is to evaluate the program theory of a lifestyle intervention program for the prevention and treatment of metabolic syndrome. Methods: The program evaluated is a tailored intervention for multiple health behavior associated with metabolic syndrome which is informed by theoretical constructs from the Intervention Mapping and Transtheoretical model. The program components include one-to-one health counseling, a self-management handbook, and a health diary. To evaluate program impact theory we examined the logic of program goals and objectives, intervention methods and strategies, and the theoretical constructs of program materials through document review and matrix building. Results: This evaluation has found that the intervention program applied social cognitive theory constructs to design intervention methods and strategies in addition to the Transtheoretical model: self-monitoring for goal setting and monitoring skill, outcome expectation for the benefits of health behavior change, and interaction with environment for observational learning through modeling. While the intervention addresses multiple determinants and behaviors, it is limited to an individual level and lacks social and environmental approaches. Following the Transtheoretical framework, the contents of the intervention materials were developed utilizing consciousness raising as a main strategy for earlier stages of change, and counterconditioning and stimulus control for later stages of change. Conclusion: Program theory evaluation can be a process of enhancing program validity. It would also be necessary for providing basis for efficient program implementation. When comparisons of program theory between similar programs are possible, program theory and validity will be strengthened when comparisons of program theories between similar programs are possible.

• Advances in concrete construction
• /
• v.8 no.4
• /
• pp.285-294
• /
• 2019

In the present paper, the fiber theory has been employed to model the reinforced concrete (RC) deep beams (DBs) considering the reinforcing steel bar-concrete interaction. To simulate numerically the behavior of materials, the uniaxial materials' constitutive laws have been employed for reinforcements and concrete and the bond stress-slip between the reinforcing steel bars and surrounding concrete are taken into account. Because of the high sensitivity of DBs to shear deformations, the Timoshenko beam theory has been applied. The shear stress-strain (S-SS) relationship has been defined by the modified compression field theory (MCFT) model. By modeling about 300 RC panels and employing a produced numerical database, a study has been carried out to show the sensitivity of the MCFT model. This is performed based on the multiple linear regression (MLR) models. The results of this research also illustrate how different parameters such as characteristic compressive strength of concrete, yield strength of reinforcements and the percentages of reinforcements in different directions get involved in the shear behavior of RC panels without applying complex theories. Based on the results obtained from the analysis of the MCFT S-SS model, a relatively simplified numerical S-SS model has been proposed. Application of the proposed S-SS model in modeling and analyzing the considered samples indicates that there is a good agreement between the simulated and the experimental test results. The comparison between the proposed S-SS model and the MCFT model indicates that in addition to the advantage of better accuracy, the main advantage of the proposed method is simplicity in application.